HT ASTM B366 WPNIC N08800-S 1.5 SCH10S 90 DEGREE 3D ASME B16.9 Heat No 48431

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

The A182 F9 Alloy Steel Blind Flanges are used to close a connection opposed to all other flanges which extend the pipeline. Alloy Steel ASTM A182 F9 Flanges is connected to the pipe by welding the pipe to the neck of the pipe flange. However, the inside diameter of ASTM A182 F9 Alloy Steel Flanges is being designed to match the inner diameter of the pipe.

The flanges can be threaded, ring type joint, lap joint, weld neck or socket welded.

Nuts with a nominal size over 1 inch shall be a UNC Series Class 2B fit or an 8 UN Series Class 2B fit. High strength ASTM A194 grade 2H nuts are common in the market and are often replaced by ASTM A563 grade DH nuts due to the limited availability of DH nuts in certain diameters and finishes.

One of the top stocks of ASTM A182 alloy steel F5 flanges for a variety of industrial applications. With a talented team of professionals, we are committed to supplying the highest quality ASTM A182 Alloy Steel F5 Flanges, widely used by customers in suitable applications.

Alloy steel pipes are common in applications involving automobiles, kitchenware, and industrial equipment. Typically, superalloy steel boiler tubes are used in applications with ambient temperatures exceeding 500¡ãC. For example, hollow and thin-walled alloy steel drill pipes must be able to resist pressure differences that manifest between the inside and the outside of these alloy steel seamless pipes.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.45

ASTM A193 Grade B8M Grade 1 Fasteners are similar to Grade B8 but are made of AISI 316 stainless steel instead of AISI 304 stainless steel. Type 316 stainless steel has better corrosion resistance than type 304 stainless steel due to the addition of molybdenum.

A335 P5, P9, P11, P12, P22, P91 grade alloy steel seamless pipes are individually sheathed in plastic bags, and the pieces are made of waterproof packaging material and tied with nylon ropes. There is a clear label on the outside of the package for easy identification of quantity and product ID with great care during handling and shipping.

A335 grade P5c pipe is a low alloy carbon steel (Cr-Mo) self-quenching in air where high hardness and residual stress are required for welding and it is not recommended for direct use in services requiring critical conditions. This situation requires the application of post weld heat treatment (PWHT). If you want to avoid PWHT then you can use preheat (120¡ãC) when soldering A335 grade P5c tubes. PWHT is required if the thickness of ASTM A335/ASME SA335 P5c alloy steel pipe is greater than 13 mm.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P149

ASTM A193 Grade B7 specification covers the requirements for high strength alloy steel bolting materials for high temperature or high pressure service and other special purpose applications. It is a standard specification that defines typical chemical composition, mechanical properties, hardness requirements, preferential heat treatment, product marking, certification, and other requirements for bolted connections used in pressure vessel service, valves, flanges, and fittings. ASTM A193 defines SI (metric) and inch-pound units.

Chrome moly alloy flanges connect pipes, valves, pumps and other equipment, forming a piping system.

A335 P9 seamless pipe is a type of chrome molybdenum pipe listed in ASTM A335 (ASME S/A335, Chrome-Moly), which has become the standard in the power generation industry and petrochemical industry, not only because of its tensile strength, corrosion resistance resistance and high temperature strength, but also because of its cost-effectiveness. Chromium molybdenum tubes are popular in P grades P5, P9, P11, P22, P91 and P92. The P11, P22 and P91 grades are most commonly used in the powder industry and petrochemical plants, while the P5 and P9 grades are often used in oil refineries.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.66

B16.11 Forged Fittings, Socket-Welding and Threaded ASTM B366 specification covers Inconel, Monel, Hastelloy and Nickel Alloy Pipe Fittings used in acidic and sea water.

ASTM A320 L7 Stud Bolts are designed for low temperature performance. These fasteners are commonly used in valves, flanges, fittings and pressure vessels. The ASTM specification recommends a minimum impact value of 20-ft-lbf -150F for ASTM A320 L7 studs.

The ASTM A333 specification covers carbon steel pipes for low temperature applications. LTCS or Low Temperature Carbon Steel is an alloy covered under this specific specification. A333 carbon steel cryogenic tubing specified by ASTM has moderate tensile properties and good hardness, but low corrosion resistance. The corrosion resistance of the alloy can be improved by using certain surface treatments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.41

WPHY 52 Fittings are recommended be heat treated by one or more of the following procedures: annealing (stress relieving), normalizing, normalizing and tempering, quenching and tempering.Made utilizing high-grade crude materials, these ASTM A860 WPHY Pipe Fittings are anti-corrosive and strong.

Chrome alloy steel flanges are manufactured in accordance with ASTM A182 F11/F12 and are widely used in nuclear power plants, power plants, water systems, electric power, oil fields, pipeline engineering, natural gas, marine engineering, shipbuilding and other industries. These flanges are harder and stronger than regular steel, but not as corrosion resistant as stainless steel.

Impact strength as well as high surface smoothness are the result of round bar forging of alloy steel DIN 1.7335. Once the materials are forged, they are allowed to cool to the temperature specified by the specification ASTM A 182.

Alloy Steel A182 F12 Flanges has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulfuric, phosphoric, and nitric acids. Alloy Steel F12 Blind Flanges also possesses a great resistance to pitting in chloride solutions, a great resistance to crevice and stress corrosion cracking.

ASTM A 182 Alloy Steel GR F11 Round bars are generally considered less robust than stainless steel alloys, and their price plays an important role in the purchase.

These ASTM A182 Grade F5 Flanges gives extraordinary erosion resistance in, for instance, caustic and acidic applications which includes sulphuric and higher chloride environments. A182 Gr F5 Threaded Flanges are mostly used in utility services such as air and water. It is similar to the Slip-On flange, but the bore is threaded. Its greatest advantage is that it can be assembled without welding, explaining its use in low pressure services at ordinary atmospheric temperatures, and in highly explosive areas where welding create a hazard.

B7 y B7M se trataran termicamente mediante enfriamiento rapido y revenido en un medio liquido. Para los sujetadores B7M, el tratamiento termico final, posiblemente una operacion de templado si se realiza a un minimo de 1150 ¡ãF [620 ¡ãC], debe realizarse despues de todas las operaciones de mecanizado y formacion, incluido el laminado de roscas y cualquier tipo de corte. Preparacion de la superficie que permite realizar pruebas de dureza, evaluacion no destructiva o tension ultrasonica de pernos.

Alloy steel pipes are used for high temperature and very low temperature service (low temperature) in the energy industry, or for very high pressure applications. ASTM A335 Alloy Steel Pipe is suitable for ASTM A234 WPx Series Butt Weld Fittings (WP5, WP9, WP91) and A182 Fx Forged Fittings and Flanges (A182 F5, F9, F11, F22, F91). All of these materials have similar chemical and mechanical properties and can be joined or welded.

ASTM A182 F5 Lap Joint Flanges go by a range of names, including back up flange, loose hubbed flange, loose ring flange and van stone flange. ASTM A182 F5 Flanges is a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal.

This is the widely used product in many other industries and is thus manufactured with utmost care and the packaging of this is also done with great care and is then dispatched to various other applications.

The term “bolting material” as used in this specification covers, rolled, forged or strain hardened bars, bolts, washers, screws, studs and stud bolts.

ASTM A335 gr P91 seamless pipe has the advantage of being dimensionally accurate, which in turn is suitable for applications that require high precision. The petrochemical industry, oil and gas industry, power plants and refineries often involve high temperatures and pressures.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.25

We are a manufacturer, supplier and exporter of Plate Flanges, which are accepted by major industries as a cost-efficient alternative to other types of flanges whose cost increases due to its expensive production pattern.

Chromium molybdenum has a better strength-to-weight ratio than steel, which enables designers to use thinner walled tubing or smaller diameter tubing to reduce overall weight.

Blind flanges can also be used to seal a nozzle opening on a pressure vessel.

The ease and economy with which INCONEL alloy 718
can be fabricated, combined with good tensile, fatigue,
creep, and rupture strength, have resulted in its use in a
wide range of applications.