HT B366 WPC N04400-S 1.25” X 0.5” SCH40S 99061

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

It can be used with other a335 gr P22 alloy tube types and fittings. SA 335 gr P22 alloy steel pipe has high heat resistance and low thermal expansion. This property of P22 metal tubing makes it suitable for use in the oil and gas industry, power industry, petrochemical industry and refineries where temperatures often fluctuate at high temperatures.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.44

Its tensile strength is 380 Mpa, while its yield strength is 585 Mpa at 0.2% Offset. The elongation of astm a182 gr f9 is 20 %.

ASTM A335 P91 Seamless Pipe is one of the seamless pipes that standardize A335 in various industries. ASME SA 335 Grade P91 Alloy Steel Pipe is made of chrome molybdenum alloy. These pipes contain 1% molybdenum, 9% chromium and nickel, manganese, silicon and carbon. ASTM A335 P91 pipe has very high tensile strength, yield strength, impact cracking resistance, corrosion cracking resistance and oxidation resistance.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.23

SA182 F5 Plate Flange can be used in those environments where there is a presence of mild corrosive compounds. It can also be used in non-corrosive applications as well as in erosive applications at the temperature between ranging between -30oC up to +650oC. ASTM A182 Grade F5 Flanges in conditions characterized by increased levels of carbon dioxide (CO2), hydrogen sulphide (H2S), and as well chlorides (Cl). The highlight of A182 F5 Steel Slip On Flanges are Precise plan, Accurate measurements, Resistant to corrosion, Less costs, pitting and crevice resistance.

The Welding neck flanges are available across various materials. These materials will have to be as per the Standards set. The materials also should be as per the quality specified by the ASTM or ASME standards.

ASTM 182 is used for pressure systems, including fittings, flanges,and similar parts that conform to specified dimensions or dimensional standards such as ASME codes.

A182 Class F1 Socket Weld Flanges were originally developed for small high pressure pipelines. They have the same static strength as slip-on flanges, but have 50% higher fatigue strength than double-welded slip-on flanges.

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

The achievable mechanical properties depend on added elements such as nickel, chromium, molybdenum and vanadium. The following are a series of improved properties of alloy steel (compared to carbon steel): strength, hardness, toughness, wear resistance, corrosion resistance, hardenability and hot hardness. To achieve some of these improved properties, the metal may require heat treatment.

ASTM A193 Grade B7 bolts are made of chrome-molybdenum material with high tensile strength and good elongation properties.

ASTM A182 F11 class 1 Flange is the method of connecting two pipes, pumps and valves. This consists of chromium molybdenum based alloy steel grade.

Alloy steels or high strength steels are low carbon steels or steels at the lower end of the medium carbon range. Alloy steels have additional alloying components to increase their strength, wear resistance or especially tensile strength. These alloying components include chromium, molybdenum, silicon, manganese, nickel and vanadium. The maximum permissible content of impurities such as phosphorus or sulfur is limited.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.46

Its greatest advantage is that it can be assembled without welding, which explains its use in low-pressure service at ordinary atmospheric temperatures and in highly explosive areas where welding creates a hazard.

Alloy A182 flange also has durability and longevity.

Alloy Steel F11 Flanges specifications are also mentioned and the face type starts from flat face, raised face, ring type joint and many more.

Chromium Molybdenum Alloy Steel or Chromium Molybdenum, CrMo is an alloy steel used for high temperature and high pressure service. Chromium molybdenum is used in power generation and petrochemical industries for its tensile strength, corrosion resistance and high temperature strength. Chromium molybdenum has a better strength-to-weight ratio than steel, which enables designers to use thinner walled tubing or smaller diameter tubing to reduce overall weight.

ASTM A182 F12 flat bar is a flat rectangular section with square edges of varying sizes. It is suitable for a variety of applications, distributed in engineering, construction, manufacturing, manufacturing, mining, light grids and many other industries.

In addition to good corrosion resistance, the addition of chromium and molybdenum to the alloy enhances its ductility.

Applications for Alloy Steel A335 P5 EFW Tubing can be seen in petrochemical, oil and gas industrial applications, power plants and other high pressure and high temperature services.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P123

It is almost the same as AISI 4130 chrome-molybdenum alloy steel, but with a slightly higher carbon content. Compared to AISI/ASTM 4130 alloy steel, AISI 4140 steel has a higher carbon content, which provides higher strength and heat treating capability, but also has limited weldability.

As one of the leading Alloy Steel Flanges Manufacturers in China we supply all different types of flanges in all material grades. Please contact us for your alloy steel flange needs.

Monel 400? can be used in temperatures up to 1000 oF. Monel K-500 is basically a better version of 400 and has higher strength and hardness.

Alloy Steel F5 Flanges are square-shaped and are instrumental in interfacing pipes of nominal bore size without welding and are reasonable for high pressure hydraulic frameworks. ASTM A182 F5 Lap Joint Flanges go by a range of names, including back up flange, loose hubbed flange, loose ring flange and van stone flange. ASTM A182 Gr F5 Blind Flanges are commonly used in petrochemical, pipe engineering, public services and water works.

ASTM 182 is used for pressure systems, including flanges, fittings, and similar parts that conform to specified dimensions or dimensional standards such as ASME codes.

A335 grade P5c pipe is a low alloy carbon steel (Cr-Mo) self-quenching in air where high hardness and residual stress are required for welding and it is not recommended for direct use in services requiring critical conditions. This situation requires the application of post weld heat treatment (PWHT). If you want to avoid PWHT then you can use preheat (120¡ãC) when soldering A335 grade P5c tubes. PWHT is required if the thickness of ASTM A335/ASME SA335 P5c alloy steel pipe is greater than 13 mm.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P149

The flanges can be threaded, ring type joint, lap joint, weld neck or socket welded.

We are stocking 22 WPHY 52. Petromet is distributor and dealer of Mss SP75 WPHY 52 Equal Tee, ASTM A860 WPHY 52 Reducing Tee in various sizes.

Due to the higher mechanical properties of a335 gr P91 alloy pipe, it is widely used in these industries. SA 335 gr P91 alloy steel pipes are available in different sizes and shapes. Wall thicknesses vary from 3 to 12 mm depending on the diameter and pressure rating of the pipe.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.26

The specification for ASTM A320 Grade L7m materials covers alloy steel and stainless steel bolting materials for low temperature applications. ASTM A320 L7 Studs can also be used in applications with ambient temperatures up to -150oF. ASTM A320 grade L7m bolts and ASTM A320 bolts have a minimum Charpy impact value of 15 foot-pounds at this temperature.

A193 B7 threaded rods are also known as hex bolts. It has threads on both ends and it is a relatively long rod.