Incoloy 800 N08800 steel plate

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Incoloy 800H and 800HT are typically used in parts above 1100¡ãF where creep and fracture resistance is required. The chemical balance allows nickel steel alloys to exhibit excellent resistance to carburizing, oxidizing and nitriding atmospheres. Incoloy 800HT will not become brittle even after prolonged use in the 1200-1600¡ã F range where many stainless steels become brittle. 800HT exhibits the excellent cold forming qualities normally associated with Nichrome.

Incoloy A-286 is an age-hardenable iron-nickel-chromium alloy designed for applications requiring high strength and good corrosion resistance at temperatures up to 700¡ãC (1290¡ãF). Like other specialty materials in the Inconel family, Incoloy A-286 fasteners have excellent corrosion resistance and can be made into a variety of fasteners including hex bolts, washers, nuts and studs.

Alloy 800HT / Incoloy 800HT is a controlled composition derivative of INCOLOY alloy 800H (UNS N08810) and is used for the same creep resistant applications, however the combined effects of mechanical and thermal processing of the alloy permit higher design stresses to be incorporated than are permitted for the conventional alloy.

Incoloy 825 round bar is similar to Alloy 800 bar, but has better resistance to water corrosion. Incoloy 825 round bar has some resistance to oxidizing and reducing acids, stress corrosion cracking, and restricted corrosion such as crevice and pitting corrosion. Alloy 825 is particularly resistant to phosphoric and sulfuric acids.

These nickel steel alloys are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1.20 percent aluminum and titanium in alloy 800HT. Incoloy 800 was the first of these alloys and it was slightly modified into Incoloy 800H.

ASTM A564 Nickel 200 Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Alloy 800 – The 800 series of alloy (Incoloy 800, 800H and 800HT) are nickel-iron-chromium superalloys that have excellent properties of high temperature strength and resistance to oxidation, carburization and other types of high temperature corrosion. Alloy 800, 800H and 800HT are used in various applications from furnace components, petrochemical furnace cracker tubes to sheathing for electrical heating elements.

Nickel 201 Slip on flange The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

The flanges produced by us are said to be sturdy and leakproof.

Their Inconel surface becomes corrosion resistant due to the formation of patina. Incoloy material has a higher iron content and is less expensive than Inconel products. They are also resistant to corrosion from a variety of materials, including steam and acids. These materials are resistant to seawater, acid gas and saltwater environments.

ASTM B462 UNS N08020 Slip On Flange The Alloy 20 is an austenitic niobium-stabilized alloy that contains nickel and low carbon. The chemical composition of Alloy 20 Flanges will mainly include nickel, chromium, and iron, along with some additional elements like molybdenum and copper. The Alloy 20 Flanges is known for its excellent corrosion resistance, even in harsh chemical environments. The Alloy 20 Pipe Flanges show great resistance capabilities in surroundings containing citric acids, phosphoric acids, sulfuric acid, and chlorides. The ASTM B462 Uns N08020 material is known for its good mechanical properties, even at elevated temperatures.

NAS 800H (NCF 800H, UNS N08810)/NAS 800T (UNS N08811) are nickel-iron-chromium alloys that provide high strength and excellent resistance to oxidation and carburization at high temperatures

This phenomenon is the reason why manufacturers recommend using Inconel 800 for extreme temperature and high pressure applications.

Alloy 926 is a super austenitic molybdenum stainless steel with excellent resistance to a variety of highly corrosive environments. The combination of molybdenum and nitrogen in its composition resists pitting and crevice corrosion, while copper improves sulfuric acid resistance, while nitrogen increases yield and tensile strength.

Incoloy A-286 stud bolt is a Fe-25Ni-15Cr base superalloy reinforced by molybdenum, titanium, aluminum, vanadium and trace boron. It has high yield strength and durability, creep strength below 650 ¡æ, good processing plasticity and satisfactory welding performance. Incoloy A286 is a Fe-25Ni-15Cr based superalloy reinforced with additions of molybdenum, titanium, aluminum, vanadium and trace amounts of boron. It has high yield strength, durability and creep strength, good workability and good weldability at 650¡æ.

ASME B366 Incoloy 800 Elbow resists water corrosion at moderate temperatures.

Inconel 725 bolt material meets ASTM B446, B564, F467, F468, UNS N06725, DIN EN 2.4856, AMS 5666 and BS 3076 specifications and is adequate for demanding strength, corrosion resistance and high temperature applications up to 1000o C (1800o F).

Alloy 200 UNS N02200 Weld Neck Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Thermal processing equipment in industrial applications, such as baskets, trays, and fixtures. In chemical or petrochemical processing it is used for heat exchangers and piping systems in nitric acid media, especially where resistance to chloride stress corrosion cracking is required.

Used in chemical and petroleum processing, in power plants for superheater and reheater tubing, in industrial furnaces, and for heat treating equipment.

Alloys 800H and 800HT are iron-nickel-chromium solid solution strengthened alloys with a nominal chemical composition of 42% iron, 34% nickel, and 22% chromium.

N08825 Blind Flange Incoloy 825 Flanges (UNS N08825) is composed of addition of molybdenum, copper, and titanium into its nickel-iron-chromium base. The extra metals give Incoloy 825 Blind Flange exceptional resistance against corrosion, even more so than other nickel alloys.

SB564 UNS N02200 Flange The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

800H, AT (Incoloy 800) is an austenitic heat resistant alloy designed for high temperature structural applications.

UNS N08825 Flange Incoloy 825 Flanges (UNS N08825) is composed of addition of molybdenum, copper, and titanium into its nickel-iron-chromium base. The extra metals give Incoloy 825 Blind Flange exceptional resistance against corrosion, even more so than other nickel alloys.

Applications for ASME SB408 Alloy 825 round bar are chemically machined components, pollution control, vapor recovery, pickling tank components, and nuclear fuel processing. ASME SB408 Alloy 825 bar has excellent resistance to a variety of corrosive environments including oxidation and reduction.

Nickel alloys pipe fittings are metals made from combining nickel as the primary element with another material. It merges two materials to deliver more desirable features, such as higher strength or corrosion-resistance. Because of its unique properties, it’s used in a variety of equipment spanning multiple industries.

Alloy 926 (1.4529) screws are the perfect replacement for 316L when higher corrosion resistance is required without increased strength. Alloy 926 fasteners are considered a 6-molybdenum alloy (6-molybdenum or 6% molybdenum), similar to sister alloys AL6XN and SMO 254. In the stainless steel category, these 6 molybdenum alloys are considered very corrosion resistant.

ASTM B564 Nickel Alloy 200 Threaded Flanges The Nickel alloy 200 has some excellent properties, which have made it quite famous in various industries. The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment. We are a specialized Nickel 200 Flange Manufacturer In China who produces the flanges of the given grade in different shapes and sizes, according to the dimensional requirements of the client. Our experienced team of professionals supervises the process of manufacturing Nickel 200 Slip On Flanges to ensure they have the correct dimensional accuracy and quality. They also conduct certification tests to ensure the product’s condition before delivering it to the customers.

One of the main benefits of using nickel alloys is that they tend to be resistant to high temperatures. ASTM B425 UNS N08825 bar stock has a nickel content between 38% and 46% and is able to withstand a moderately high temperature range without affecting its tensile strength. This property is particularly useful in applications involving nuclear fuel reprocessing, where Incoloy 825 Square bar is considered a value-add. In nuclear reprocessing, the process involves separating chemicals such as fission products and excess uranium from spent nuclear fuel.