Incoloy 800H elbows to ensure optimum high temperature properties

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Inconel 725 Nuts, also known as UNS N07725 Nuts, are highly corrosion resistant and age hardenable for extreme strength. It is used in a wide range of severely corrosive environments. Age hardened Alloy 725 nuts are twice as strong as annealed Alloy 625. Inconel 725 Hex Nuts are an excellent choice for the petrochemical and process industries. They are also commonly used in marine applications where high strength fasteners that resist seawater corrosion, pitting and crevice corrosion are required.

ASTM B462 UNS N08020 Slip On Flange Alloy 20 flanges provide good performance in hot sulfuric acid, specifically they offer good resistance to stress-corrosion cracking in boiling sulfuric acid at specific range of 20% to 40% concentration, as well as general sulfuric acid resistance.

Both alloys have the same chemical composition as Alloy 800 plate (UNS N08800), but the carbon content is higher in both grades – (0.05 – 0.10%) in Alloy 800H and (0.06 in Alloy 800H) – 0.10% ) 800HT board.

Incoloy 800 is a popular choice in the oil and gas industries because it can withstand sour gas and high chloride environments.

ASTM B564 Inconel 718 Threaded Flange Grade 718 Inconel Flange is the most common grade of the hardenable Inconel. This precipitation-hardened nickel-chromium alloy combines outstanding corrosion resistance and high strength at elevated temperatures. The alloy is an about 2x as strong as Inconel grade 625 having excellent creep-rupture strength at temperatures to 1300¡ãF (700¡ãC) and usable up to 1800¡ãF (982¡ãC). Inconel grade 718 is often used in gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling.

Incoloy 800/800H/800HT pipes are mainly made of nickel-iron-chromium alloy, which has excellent resistance to carburization and oxidation, and has good tensile strength. These steel alloys are the same. The only difference is the percentage of aluminum and titanium in these alloys. However, if we talk about products like pipes and pipes, they are considered to be the most demanding and widely used products. Due to their exceptional properties and superior performance, these products are used in several industries and applications.

Alloy 800H rods are designed to have a uniform cross-sectional area and can be produced in square, round or rectangular sizes. Versatile ASTM B408 UNS N08800 rods are rigorously tested to detect and eliminate any defects in these robust assemblies.

ASTM B564 Nickel Alloy 200 201 Long Weld Neck Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

ASTM B163 B407 ASME SB163 SB407 N08800 Incoloy 800 Seamless Pipe is especially suitable for high temperature equipment in the petrochemical industry because the alloy does not form an embrittled sigma phase after prolonged exposure to 1200¡ãF (649¡ãC).

800H is commonly welded using RA82 (ERNiCr-3) bare wire for applications under 1450¡ãF.

Incoloy 825 fasteners were an integral part of our original product line. BoltPort is a well-known manufacturer and supplier of Incoloy 825 fasteners such as stud bolts, hex bolts, heavy hex bolts with hex and heavy hex nuts, flat washers, spring washers and more. These Alloy 825 fasteners are thermoformed and formed in our factory from a semi-finished stock.

The 800H/AT is normally soldered with RA82 (ERNiCr-3) bare wire for applications up to 1450¡ãF. RA330-04 (N08334) bare wire provides closer thermal expansion coefficient matching, as well as higher strength.

Alloy 800 is an iron-nickel-chromium alloy with moderate strength and good resistance to oxidation and carburization at elevated temperatures.

Nickel Alloy DIN 2.4066 Slip on Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

UNS N08825 Flange Incoloy 825 Flanges are one such type of flanges that have outstanding resistance to oxidizing as well as reducing acids. They are fabricated to improve their resistance to corrosion and are clean to weld

Incoloy 800 Flanges ASME B16.5 We are the manufacturer &exporter of ASTM B564 Incoloy 800 Flanges, Incoloy 800 Flanges ASME B16.5.

ASTM B564 UNS N08800 Incoloy 800 is a nickel-iron-chromium alloy that provides high strength and excellent resistance to oxidation and carburization at high temperatures.

INCOLOY alloy 800 is an alloy of nickel, iron and chromium. The alloy is capable of remaining stable and maintaining its austenitic structure even after long time exposures to high temperatures. Other characteristics of the alloy are good strength, and high resistance to oxidizing, reducing and aqueous environments

INCOLOY alloy 800 (UNS N08800, W. Nr. 1.4876) is a widely used material for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500¡ãF (816¡ãC).

ASTM B425 UNS N08825 bar stock has a nickel content between 38% and 46% and is able to withstand a moderately high temperature range without affecting its tensile strength.

Incoloy 825 round bar has excellent resistance to a variety of environmental and corrosive conditions such as stress corrosion cracking, reducing environments, oxidizing environments, pitting, crevice and intergranular corrosion. These circular die have excellent mechanical properties over a wide temperature range.

Alloy 800H plate (UNS N08810 plate) is a widely used structural material for equipment that must have high strength and resist carburization, oxidation and other detrimental effects of high temperature exposure.

Alloy 825 bolts have good mechanical properties from low temperatures to moderately high temperatures up to about 1000¡ãF. Microstructural changes that significantly reduce ductility and impact strength occur when used at temperatures above 1000¡ãF.

Used in chemical and petroleum processing, in power plants for superheater and reheater tubing, in industrial furnaces, and for heat treating equipment.

Incoloy 800H has a restricted carbon content range of 0.05 to 0.10%, which is in the upper portion of that of Incoloy 800, and is annealed at 1149 to 1177oC (Incoloy 800 is annealed at 983 to 1038oC). These differences impart it to have higher stress rupture and creep properties than Incoloy 800.

825 alloy sheet has excellent corrosion resistance. Resists general corrosion, intergranular corrosion, pitting and crevice corrosion, and stress corrosion cracking under reducing and oxidizing conditions. It can be easily worked hot or cold. Especially suitable for phosphoric acid, sulfuric acid, sulfur-containing flue gas, oil wells, sour gas and sea water.

Incoloy 825 alloy is a chromium, nickel, iron based alloy in addition to copper and molybdenum. It has strong resistance to redox acid and stress corrosion cracking. In addition, it is completely resistant to pitting, abrasion and erosion. In addition, it is completely resistant to phosphoric and sulfuric acid. All of this has prompted manufacturers to use Incoloy alloys when making Incoloy 825 bar. In addition, the product has higher tensile strength, flexibility, durability and durability. Incoloy 825 bar has good dimensional accuracy, strong construction and excellent surface finish to withstand heavy loads and maintain high temperatures.

Incoloy A-286 is an age-hardenable iron-nickel-chromium alloy designed for applications requiring high strength and good corrosion resistance at temperatures up to 700¡ãC (1290¡ãF). Like other specialty materials in the Inconel family, Incoloy A-286 fasteners have excellent corrosion resistance and can be made into a variety of fasteners including hex bolts, washers, nuts and studs.

Nickel WNR 2.4066 Forged Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

They are used for high temperature service, where resistance to oxidation and carburisation are required. For optimum stress rupture properties, or for pressure vessel service above 815¡ãC, Incoloy 800H or Incoloy 800HT should be used.

Grade 1.4529 is a high alloy stainless steel of austenitic structure and can be classified as a nickel alloy (by US standards). Delivered in a supersaturated condition, it exhibits resistance to intergranular corrosion, pitting and stress corrosion, salt, seawater, chlorides, sulfuric acid, phosphoric acid, and other highly concentrated liquid and gaseous corrosive chemicals. At the same time, nickel and nitrogen can not only improve the stability, but also reduce the tendency of separation of crystallization thermal process or welding process is better than the nitrogen content of nickel alloy. 926 has some corrosion resistance to chloride ions due to its localized corrosion characteristics and 25% nickel alloy content.