incoloy 800h nickel pipe

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

HASTELLOY B-3 alloy (UNS N10675) is an excellent resistance alloy to hydrochloric acid at all concentrations and temperatures. It also withstands sulfuric, acetic, formic and phosphoric acids, and other nonoxidizing media. B-3 alloy has a special chemistry designed to achieve a level of thermal stability greatly superior to that of its predecessors, e.g. HASTELLOY B-2 alloy. B-3 alloy has excellent resistance to pitting corrosion, to stress-corrosion cracking and to knife-line and heat-affected zone attack.

Incoloy 800H is a higher carbon version of the alloy 800. The Incoloy 800H Pipe is designed with a superior chemical composition consisting of 30 to 35% of nickel with 19 to 23% of chromium and other constituent alloys.

Inconel Pipe offers resistance to oxidizing agents and suitable to use in various environmental conditions. The factory uses innovative technology under the supervision of our professional teams.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Inconel WERKSTOFF NR.2.4668 Tubing is a nickel based alloy which has been precipitation hardened. The inconel 718 tube is designed to be used in those applications which have the need for very high yield strength, high tensile strength as well as good creep rupture properties.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Alloy 718 for aerospace and power generation is heat treated to give maximum strength and high creep resistance with typical hardness values exceeding 42HRC. The major applications are components for gas turbines, aircraft engines, fasteners and other high strength applications.

Alloy 22 is nickel-base and typically contains 22% chromium, 14% molybdenum, and 3% tungsten.
Iron is normally limited to less than 3%. The alloy¡¯s high content of chromium gives it good resistance to
wet corrosion by oxidizing media (e.g., nitric acid and ferric and cupric salts). Its contents of molybdenum
and tungsten give the alloy resistance to wet reducing media (e.g., sulfuric and hydrochloric acids). Alloy
22 exhibits excellent resistance to corrosive attack by seawater under stagnant and flowing conditions.

Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Compared to stainless steel, this material has a lower yield strength of 148MPa minimum and 462MPa minimum tensile strength. Nickel 200 ERW pipe is also dense as it contains 99% nickel as well as carbon manganese, silicon, iron, sulfur and copper. The density is 8.9 grams per cubic centimeter.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.60

inconel pipe and tubes retain all of the key characteristics associated with these nickel alloys. This includes industry-leading corrosion resistance, good strength and excellent high-temperature performance. Many different Grades of INCONEL are used to produce pipes and tubes, and they have various applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Monel 400 has excellent corrosion resistance in hot concentrated alkaline solution.

Alloy C-276 has excellent resistance to phosphoric acid at all temperatures below boiling point and concentrations below 65%. The limiting factor when dealing with strongly oxidizing environments is the low chromium content, which means that hot concentrated nitric acid environments are not desirable.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.31

La materia prima de Alloy 20 es de alta calidad. Esto ayuda a que el producto final funcione en condiciones severas de corrosion y agrietamiento. A traves de una serie de pruebas, hemos llegado a diferentes informes y conclusiones. Nuestro analisis promete pruebas quimicas, pruebas de elementos traza y varias otras comprobaciones.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

These tubes can be readily welded in place following common welding process without requiring a matching filler metal.

Alloy C-276 is one of the most common corrosion resistant alloys available today. It is used in a variety of environments from moderately oxidizing to strongly reducing conditions. Alloy C-276 has excellent resistance to sulfuric acid, hydrochloric acid, formic acid, acetic acid, chlorides, solvents, wet chloride gas, hypochlorite and chlorine solutions.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.30

At elevated temperatures, most alloys rapidly deteriorate due to oxidation. However, at temperatures as high as 1050¡ãC, the Inconel 625 Clad pipe is an alloy that does not become susceptible to decay by oxidation. This material is suited for structural constructions, especially those components such as Alloy 625 Seamless Pipe for heat transference applications.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Therefore, pure nickel alloy or high nickel alloy seamless pipes are only used for applications that require this feature and cannot be replaced by anything else. These polished pipes can be pure straight pipes or other shapes. The most commonly used shape is the round tube. But in addition to hot-worked nickel alloy round tubes, there are square, hexagonal and rectangular tubes.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.38

It is used in high stress applications at elevated temperatures. The Inconel 625 Tube can be used in heat exchangers, condensers and in boiler components for this reason.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Monel 400 Welded Pipe (NA13, N04400) offer hardness, strength and corrosion resistance with good fabrication capabilities. Monel 400 ERW Pipe can easily be welded by gas metal arc, gas-tungsten arc or shielded metal arc processes using appropriate filler metals.

Unique among Monel alloys, ASTM B165 Monel Seamless and Welded Pipe is considered a Puritan alloy because it contains the same nickel and copper content as the natural nickel ore found in the Sudbury mine in Ontario, Canada.

ASTM B619 UNS N10276 Alloy C276 Tube covers 2 classes under this specification. In class 1, the Hastelloy C276 Tube is furnished in an as welded and solution annealed condition or these tubes could be welded along with being sized and solution annealed.

Los tubos de caldera de aleacion C276 estan disponibles en tama?os ATSM 622/ 619/ 775/ 516/ 626. La tuberia sin soldadura Hastelloy C276 funciona bien incluso en agua salada corrosiva. Los fabricantes de tuberias Hastelloy recomiendan la tuberia soldada Hastelloy Astm B626 C276 por su resistencia a los compuestos de cloro.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Incoloy Alloy 600 Tubes are available in numerous grades that provide enhanced protection against aggressive forms of corrosion. Incoloy Alloy 600 Tubes are commonly utilized within high temperature applications that require a metal that can withstand highly acidic and corrosive environments. Incoloy Alloy 600 Tubes provide the following beneficial qualities.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

HASTELLOY C-276 is a nickel-chromium-molybdenum alloy with general corrosion resistance unmatched by any other alloy. It has excellent resistance to a variety of chemical process environments, including ferric and cupric chlorides, thermally contaminated inorganic acids, solvents, chlorine and chlorine contamination (organic and inorganic), dry chlorine, formic and acetic acids, acetic anhydride , seawater and brine solutions, hypochlorite and chlorine dioxide solutions.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

The Inconel alloy tubes is one of the most effective alloy choice for severe environments. Its usefulness in varying climate, especially with regards to general and local corrosion makes the alloy pipe in industries such as – chemical processing, pickling operations, pollution control, acid production, nuclear fuel reprocessing, as well as the handling of radioactive wastes.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Los accesorios para tuberias de aleacion 20, las bridas de aleacion 20 y otros productos de grado de aleacion 20 son utiles en diversas aplicaciones en la industria de procesos quimicos, fabricacion de papel, equipos de calefaccion industrial, plasticos, caucho sintetico, productos farmaceuticos y la industria de procesos quimicos.

As one of the most versatile and productive metals, nickel readily forms alloys with various elements. Typically, elements such as chromium, molybdenum, copper, and tungsten are used to manufacture high-alloy nickel alloy seamless pipes. A desirable property of commercially pure nickel is the metal’s ability to withstand high temperature settings. Therefore, in those applications that require higher mechanical properties at high temperatures, pure nickel thermal finished tubes are an ideal alternative.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.25

Features of the inconel 600 pipes are as follows- it has good resistance towards corrosion, it is immune to chloride stress and corrosion cracking.

The INCONEL alloy tubes easy to produce and readily manufactured, which has led to its use across a wide range of industries. It is often employed in rocketry, creating tubes and pipes for liquid-fuelled rockets, as well as in the aerospace industry.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.