Incoloy 800H pipe fittings elbows as a popular choice in the oil and gas industries

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Alloy 800HT / Incoloy 800HT is a controlled composition derivative of INCOLOY? alloy 800H (UNS N08810) and is used for the same creep resistant applications, however the combined effects of mechanical and thermal processing of the alloy permit higher design stresses to be incorporated than are permitted for the conventional alloy.

For applications requiring higher resistance to stress rupture and creep, especially above 1500¡ãF (816¡ãC), use INCOLOY Alloys 800H and 800HT.

Nickel 800 cold rolled bars run on the die shortly after the hot rolling process, allowing the bars to exhibit exceptional strength and excellent surface finish. Alloy 800 Bright Bar is an aesthetically appealing grade that can be produced in different finishes and sizes.

Flanges are used to connect 2 pipes or tubes. They are made up of different materials depending upon the end use.

Incoloy Alloy 800 Round Rods are used in a wide range of applications such as nitric acid catalyst supports, reformer outlet pigtails and manifolds, heat exchangers, pressure vessels and dampers.

RA330-04 (N08334) bare wire offers a closer match of thermal expansion coefficient, and somewhat higher strength.

Inconel 926 bolt material meets ASTM B446, B564, F467, F468, UNS N06926, DIN EN 2.4856, AMS 5666 and BS 3076 specifications and is adequate for high strength, corrosion resistance and high temperature applications up to 1000o C (1800o F).

Incoloy 800H/HT alloy is used for high temperature structural applications. The nickel content makes the alloy highly resistant to chloride stress corrosion cracking and embrittlement from sigma-phase precipitation. Overall corrosion resistance is excellent. Alloys 800H and 800HT have excellent creep and stress rupture properties under solution annealed conditions.

UNS N08825 Flange Incoloy 825 Flanges are one such type of flanges that have outstanding resistance to oxidizing as well as reducing acids. They are fabricated to improve their resistance to corrosion and are clean to weld

Incoloy 800 pipe fittings, resistant to seawater and salt water even in reducing environments.

The alloy is capable of remaining stable and maintaining its austenitic structure. Incoloy 800 is primarily used in applications with temperatures up to 1100¡ã F, where alloys 800H and 800HT are normally used in temperatures above 1100¡ã F where resistance to creep and rupture is required.

Similar to Inconel grades, Incoloy grade alloys have nickel and chromium as the main base elements. The only difference between these two alloy classes is their chemical composition. Inconel alloys contain almost more than 50% nickel, while Incoloy alloys are not only less than 50% nickel, but the alloys also contain iron. Known as a heat-resistant alloy, Inconel 825 has excellent properties. The most interesting properties of Incoloy 825 fasteners are their high creep resistance and high mechanical strength despite prolonged exposure to heat. The importance of these attributes in particular is considered critical across multiple industries.

Nickel 800H reducing butt welded pipe fittings are also used in heat exchangers, dampers, pressure vessels, etc. Our Alloy 800HT Elbow Butt Weld Fittings can also be used in industrial furnaces and heat treating equipment.

Incoloy 800 is a nickel, iron and chromium based alloy. Incoloy 800 bar is not only known for its good strength, but also has excellent resistance to oxidation and carburization when exposed to high temperatures. Two additional alloys can be derived from Incoloy 800. They are Incoloy 800H and Incoloy 800HT.

Inconel Alloy 600 tubing is made from a non-magnetic, nickel-chromium alloy known for its good oxidation resistance at high temperatures. In fact, Inconel Alloy 600 (UNS N06600) was designed for use from cryogenic to elevated temperatures up to and surpassing 2000 degrees F. Inconel Alloy 600 tubing possesses great mechanical properties, a good combination of high strength with good workability, and is weldable without difficulty. Inconel? Alloy 600 is not precipitative hardenable, it is hardened and strengthened solely through cold work.

Inconel 825 or Alloy 825 can be used for round bar, pipe, tube, sheet and plate. Inconel 825 is used in oil and gas or petrochemical applications and some marine and sour environments.

They can be used in pressure vessels with a wall temperature of 800 degrees F. They also offer good resistance to stress corrosion cracking.

For applications requiring greater resistance to stress rupture and creep, especially at temperatures above 1500¡ãF (816¡ãC), INCOLOY alloys 800H and 800HT are used.

Nickel 200 flange The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

INCOLOY Alloy 800 can be hot worked in the temperature range of 871-1232¡ãC (1600-2250¡ãF).

The alloy also exhibits resistance to physical deterioration, e.g. – surface pitting and cracking.

ASTM B564 Nickel Alloy 200 Threaded Flanges The Nickel alloy 200 has some excellent properties, which have made it quite famous in various industries. The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment. We are a specialized Nickel 200 Flange Manufacturer In China who produces the flanges of the given grade in different shapes and sizes, according to the dimensional requirements of the client. Our experienced team of professionals supervises the process of manufacturing Nickel 200 Slip On Flanges to ensure they have the correct dimensional accuracy and quality. They also conduct certification tests to ensure the product’s condition before delivering it to the customers.

800H, AT (Incoloy 800) is an austenitic heat resistant alloy designed for high temperature structural applications.

Alloys 800, 800H and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization at high temperature exposure.

Inconel 725 Nuts, also known as UNS N07725 Nuts, are highly corrosion resistant and age hardenable for extreme strength. It is used in a wide range of severely corrosive environments. Age hardened Alloy 725 nuts are twice as strong as annealed Alloy 625. Inconel 725 Hex Nuts are an excellent choice for the petrochemical and process industries. They are also commonly used in marine applications where high strength fasteners that resist seawater corrosion, pitting and crevice corrosion are required.

Applications for ASME SB408 Alloy 825 round bar are chemically machined components, pollution control, vapor recovery, pickling tank components, and nuclear fuel processing. ASME SB408 Alloy 825 bar has excellent resistance to a variety of corrosive environments including oxidation and reduction.

For high temperature applications requiring optimum rupture and creep properties, Alloy 800H Plate (UNS N08810 Plate) and Alloy INCOLOY 800HT Coil (UNS N08811 Coil) are used. These are also known as WNR 1.4876Sheets, WNR 1.4958 Plates, and WNR 1.4859 Coils.

ASME B366 Incoloy 800 Elbow resists water corrosion at moderate temperatures.

ASTM B425 UNS N08825 bar stock has a nickel content between 38% and 46% and is able to withstand a moderately high temperature range without affecting its tensile strength.