Incoloy 800H pipe fittings elbows ideal for demanding applications including the marine engineering and aerospace

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Inconel 800 round bar is an iron, nickel and chromium based alloy. This Inconel 800H hot-worked round bar is known for its moderate tensile strength, good oxidation and carburization resistance, and performance at elevated temperatures.

Incoloy 800, 800H and 800 HT are premium alloys composed of a combination of iron, nickel and chromium that provide excellent strength and better resistance to rust and carburization to avoid exposure to extreme high temperature conditions.

ASTM B564 Uns N06600 Flanges nconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

The Alloy 800H Pipe works well in applications when they are exposed to high temperatures for a prolonged period of time.

The alloy exhibits excellent resistance to seawater and brine, making it well suited to marine applications.

The combined effects of mechanical and thermal processing of Incoloy Alloy 800HT permit higher design stresses to be incorporated than are permitted for the conventional Alloy 800H.

INCOLOY alloys belong to the category of super austenitic stainless steels. These alloys use nickel-chromium-iron as the base metal and add additives such as molybdenum, copper, nitrogen and silicon. These alloys are known for their excellent strength at high temperatures and good corrosion resistance in a variety of corrosive environments.

Alloy 800 is an iron-nickel-chromium alloy with moderate strength and good resistance to oxidation and carburization at elevated temperatures.

Incoloy 800 Bars is another nickel-chromium alloy that is resistant to high temperatures and corrosion.

Alloy 825 (UNS N08825) is an austenitic nickel-iron-chromium alloy with additions of molybdenum, copper and titanium.

The Incoloy 800h Pipe produced in accordance with the ASTM B407 specification is supplied either in the form of cold worked or hot finished manner. Aside from conforming to the chemistry requirements of the said specification the Sb 407 UNS N08810 Incoloy Alloy 800h Round Pipe, is to be heat treated at determined annealing temperatures. Another requirement that needs to be adhered to is the Sb 407 N08810 Grade 1.4958 Pipe needs to be tested and measured via the Planimetric method.

The strength of 800H is achieved by controlled levels of carbon, aluminum and titanium along with a 2100¡ãF minimum anneal to achieve a grain size of ASTM 5 or coarser.

926 is an austenitic stainless steel alloy with a chemical composition similar to alloy 904L with 0.2% nitrogen and 6.5% molybdenum. The content of molybdenum and nitrogen significantly increases resistance to pitting and crevice in halide media. At the same time, nickel and nitrogen not only ensure the metallographic strength, but also reduce the separation of the intergranular thermal tendency. Alloy 926 is a super austenitic molybdenum stainless steel with excellent resistance to a variety of highly corrosive environments. They are used in a variety of heavy duty applications including chemical storage and processing, aerospace and food processing.

Alloy 800 has higher mechanical properties at room temperature and during short-time exposure to elevated temperatures, whereas alloys 800H and 800HT have superior creep and rupture strength during extended high-temperature exposure.

The higher strength results from close control of carbon, aluminum, and titanium contents in conjunction with a high temp anneal.

Inconel 926 bolt material meets ASTM B446, B564, F467, F468, UNS N06926, DIN EN 2.4856, AMS 5666 and BS 3076 specifications and is adequate for high strength, corrosion resistance and high temperature applications up to 1000o C (1800o F).

Alloy 925 is a nickel-based alloy with major additions of iron and chromium, but also molybdenum, copper, titanium, and aluminum. The combination of high strength and corrosion resistance makes it suitable for applications such as valves, hangers, packers and pipes in sour gas environments. It can also be used for fasteners and pump shafts in marine environments.

The combination of nickel and chromium provides protection in both oxidizing and reducing atmospheres. The high nickel content also provides resistance to chloride ion stress corrosion cracking. Resistance to pitting and crevice corrosion is also excellent. The alloy is produced by a vacuum remelting process, but can be supplied using an air melting single-consumer electrode (VAR or ESR) practice if material specifications permit.

Incoloy 800, 800H and 800HT have nearly identical chemical composition and physical properties.

This phenomenon is the reason why manufacturers recommend using Inconel 800 for extreme temperature and high pressure applications.

RA330-04 (N08334) bare wire offers a closer match of thermal expansion coefficient, and somewhat higher strength.

INCOLOY 800H is widely used in Power generation, superheater and reheater tubing have also employed the material. Heat treatment retorts, muffles jigs and fixtures have also used this material to great effect.

ASTM B425 UNS N08825 bar stock has a nickel content between 38% and 46% and is able to withstand a moderately high temperature range without affecting its tensile strength.

Due to the molybdenum and copper content, alloy 825 plate makes the alloy resistant to reducing agents and acids. Chromium provides oxidative resistance to conditions such as nitrates and oxidizing salts and nitric acid solutions. It offers excellent corrosion resistance through phosphoric and sulfuric acid and is generally the most cost-effective alloy for sulfuric acid service.

INCOLOY alloy 800 is used in a variety of applications involving exposure to corrosive environments and high temperatures.

These Incoloy 800HT Bolt Elbow are made from high quality raw materials resulting in high quality Incoloy 800HT Bolt Elbow. They also have built-in compliance with applicable standards and laws. Additionally, the necessary standards, regulations and guidelines are followed in the manufacture of these Incoloy 800HT Bolted Elbow, resulting in a high quality product. These Incoloy 800HT Bolt Elbow are also well made.

UNS N08825 Flange Incoloy 825 Flanges are one such type of flanges that have outstanding resistance to oxidizing as well as reducing acids. They are fabricated to improve their resistance to corrosion and are clean to weld

The principle di?erence between alloys 800H and 800HT is the restricted aluminum and titanium content in 800HT, which results in higher creep and stress rupture properties.

800H can not be corroded in many kinds of media. Its high nickel content made it have good stress corrosion resistance cracking properties in the water corrosion condition. High Chromium content made it can better resist pitting and crevice corrosion cracking. This alloy can resist nitric acid and organic acid corrosion, but it is not so fine in the sulfuric acid and hydrochloric acid.

They are fabricated to improve their resistance to corrosion and are clean to weld. They are resistant to chloride pitting and sensitization.

Incoloy 825 round bar is similar to Alloy 800 bar, but has better resistance to water corrosion. Incoloy 825 round bar has some resistance to oxidizing and reducing acids, stress corrosion cracking, and restricted corrosion such as crevice and pitting corrosion. Alloy 825 is particularly resistant to phosphoric and sulfuric acids.