Incoloy 800H pipe fittings elbows in industries like nuclear fuel

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Incoloy 800 is an alloy with a higher content of iron. Due to the alloy having a higher content of ferrous, and lower content of nickel, the cost of Inconel 800 becomes low.

The alloy exhibits excellent resistance to seawater and brine, making it well suited to marine applications.

Alloys 800, 800H and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization at high temperature exposure.

Alloy 825 (UNS N08825) is an austenitic nickel-iron-chromium alloy with additions of molybdenum, copper and titanium. It was developed to provide exceptional resistance to numerous corrosive environments, both oxidizing and reducing.

The combined effects of mechanical and thermal processing of Incoloy Alloy 800HT permit higher design stresses to be incorporated than are permitted for the conventional Alloy 800H.

Incoloy 825 hex nuts are known for their tight tolerances and precise dimensions. Incoloy 825 Heavy Duty Hex Nuts offer excellent resistance to localized corrosion such as reducing and oxidizing acids, stress corrosion cracking, and pitting and crevice corrosion. These Incoloy 825 nuts have good mechanical properties from low to moderately high temperatures. However, exposure of these alloy 825 nuts to temperatures above 1000¡ãF results in microstructural changes that significantly reduce ductility and impact strength.

Nickel 800 cold rolled bars run on the die shortly after the hot rolling process, allowing the bars to exhibit exceptional strength and excellent surface finish. Alloy 800 Bright Bar is an aesthetically appealing grade that can be produced in different finishes and sizes.

Incoloy 825 is a nickel iron chromium alloy with additions of molybdenum, copper and titanium. This nickel steel alloy¡¯s chemical composition is designed to provide exceptional resistance to many corrosive environments

Inconel Alloy 800 Bolts are highly resistant to reducing, aqueous and oxidizing environments. They are highly used in temperatures up to 1100 degrees. Inconel Alloy 800 bolts are critical as it can meet almost all of their requirements. Its establishment is done through various operations, such as heat or cold. Generally speaking, the so-called quenching and tempering operations are produced by the operation, and the annealing operation is also carried out for such fasteners.

Incoloy 800 fasteners resist oxidation at high temperatures, a problem with most stainless steel alloys. Fasteners made from Incoloy 800 are also in great demand in petrochemical and chemical processing. Even when exposed to very high temperatures, Incoloy 800H fasteners maintain a very stable structure, making them very practical and sought after in many industries.

UNS N08800 sheet has been used in a variety of industries and has become a mainstay in high temperature, high exposure applications.

Alloy 200 Flange The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Incoloy 800 or also referred to as UNS N08800, nickel 800 has excellent resistance properties to chemicals as well. Renowned for its high tensile strength at elevated temperatures, Alloy 800 also resists oxidation, carburization as well as other types of high-temperature corrosion.

Incoloy 800HT, also known as ¡°Alloy 800HT¡±, is designated as UNS N08811 or DIN W.Nr. 1.4959. It is an iron-nickel-chromium alloy having the same basic composition as Incoloy 800 and Incoloy 800H but with significantly higher creep-rupture strength.

Incoloy 800 round bars contain up to 35% nickel, up to 23% chromium and up to 39.5% iron. Incoloy 800 alloy round bars also contain carbon, molybdenum and silicon content. Incoloy 800 threaded rods can be used effectively at temperatures up to 600 degrees Celsius.

Incoloy 800 is a nickel, iron and chromium based alloy. Incoloy 800 bar is not only known for its good strength, but also has excellent resistance to oxidation and carburization when exposed to high temperatures. Two additional alloys can be derived from Incoloy 800. They are Incoloy 800H and Incoloy 800HT.

Incoloy is a group of superalloys with good electrical resistance and tolerances. Incoloy 800 is an alloy of iron, nickel and chromium. These alloys are extremely resistant to corrosion and oxidation. They are not easily deformed or broken down under extreme pressure and heat. The alloy has medium strength and Incoloy 800 material has excellent mechanical properties.

These tubes have a yield strength between 30 to 60ksi and can be readily elongated by 60-30% in the system.

In power generation, superheater and reheater tubing has also employed the material 800HT.

The 800H modification was to control carbon (0.05 to 0.10%) and grain size to (>ASTM 5) to optimize stress rupture properties.

The higher strength results from deliberate control of the carbon, aluminum, and titanium contents in conjunction with a high-temperature anneal.

ASTM B462 UNS N08020 Slip On Flange Alloy 20 flanges provide good performance in hot sulfuric acid, specifically they offer good resistance to stress-corrosion cracking in boiling sulfuric acid at specific range of 20% to 40% concentration, as well as general sulfuric acid resistance.

For applications requiring greater resistance to stress rupture and creep, especially at temperatures above 1500¡ãF (816¡ãC), INCOLOY alloys 800H and 800HT are used.

Incoloy 800 is primarily used in applications up to 1100¡ãF, where 800H and 800HT alloys are typically used where creep and rupture resistance is required above 1100¡ãF. The chemical balance allows nickel steel alloys to exhibit excellent resistance to carburizing, oxidizing and nitriding atmospheres.

Incoloy 825 fasteners were an integral part of our original product line. BoltPort is a well-known manufacturer and supplier of Incoloy 825 fasteners such as stud bolts, hex bolts, heavy hex bolts with hex and heavy hex nuts, flat washers, spring washers and more. These Alloy 825 fasteners are thermoformed and formed in our factory from a semi-finished stock.

Incoloy 800-800H-800HT bolts are a nickel-iron-chromium alloy with good strength and resistance to oxidation and carburization under high temperature exposure. These nickel-steel alloys are the same, except the 800H alloy has a higher carbon content, and up to 1.20% aluminum and titanium have been added to the 800HT alloy. General corrosion resistance is considered by many to be very good. Alloys 800H and 800HT exhibit excellent creep and stress rupture under solution annealed conditions.

High performance nickel alloys for sour oil and gas fields. ASTM B407/B358 Incoloy 800 pipe-hardened nickel-based alloys and cold-worked solid nickel-based alloys offer many advantages, such as high strength, toughness, low magnetic permeability, and excellent corrosion resistance. ASTM B407/B358 Incoloy 800 pipe has proven to be a valuable and versatile material that can solve a variety of design and application problems. ASTM B407/B358 Incoloy 800 pipe resists low temperature aggressive corrosive environments as well as harsh high temperature environments. This alloy has excellent weldability and is able to join very successfully with other alloys with different compositions.

ASTM B564 Inconel 718 Threaded Flange Grade 718 Inconel Flange is the most common grade of the hardenable Inconel. This precipitation-hardened nickel-chromium alloy combines outstanding corrosion resistance and high strength at elevated temperatures. The alloy is an about 2x as strong as Inconel grade 625 having excellent creep-rupture strength at temperatures to 1300¡ãF (700¡ãC) and usable up to 1800¡ãF (982¡ãC). Inconel grade 718 is often used in gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling.

825 Nickel Alloy Sheet is used in industries such as air pollution control, chemical and petrochemical, food processing, nuclear energy, corrosion resistant applications in offshore oil and gas production, ore processing, petroleum refining, steel pickling and waste disposal.

The strength of 800H is achieved by controlled levels of carbon, aluminum and titanium along with a 2100¡ãF minimum anneal to achieve a grain size of ASTM 5 or coarser.