Incoloy 800H pipe fittings elbows with high strength and stiffness properties

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

The Incoloy 800h Pipe produced in accordance with the ASTM B407 specification is supplied either in the form of cold worked or hot finished manner. Aside from conforming to the chemistry requirements of the said specification the Sb 407 UNS N08810 Incoloy Alloy 800h Round Pipe, is to be heat treated at determined annealing temperatures. Another requirement that needs to be adhered to is the Sb 407 N08810 Grade 1.4958 Pipe needs to be tested and measured via the Planimetric method.

Additionally, the alloy’s properties make it an excellent choice for sea-water applications, including freedom from local attack (pitting and crevice corrosion), high corrosion-fatigue strength, high tensile strength, and resistance to chloride-ion stress-corrosion cracking.

Chemically, Incoloy fasteners are composed of nickel, iron and chromium as the primary alloy materials. In addition to these elements, trace amounts of molybdenum, copper and titanium are added to the B425 N08825 alloy. Components made from this alloy, including various Inconel 825 bolts and nuts, are less prone to deformation. This is because the alloy has a stable FCC microstructure. Like many conventional austenitic grade stainless steels, Alloy 825 threaded rod has a stable austenitic structure.

SB564 UNS N02200 Flange The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

ncoloy 800H Forgings have good strength and excellent resistance to oxidation, sulfidation and carburization at elevated temperatures.

Incoloy A-286 stud bolt is a Fe-25Ni-15Cr base superalloy reinforced by molybdenum, titanium, aluminum, vanadium and trace boron. It has high yield strength and durability, creep strength below 650 ¡æ, good processing plasticity and satisfactory welding performance. Incoloy A286 is a Fe-25Ni-15Cr based superalloy reinforced with additions of molybdenum, titanium, aluminum, vanadium and trace amounts of boron. It has high yield strength, durability and creep strength, good workability and good weldability at 650¡æ.

Alloy 800H Slip On Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

ASTM B564 Inconel 718 Threaded Flange Grade 718 Inconel Flange is the most common grade of the hardenable Inconel. This precipitation-hardened nickel-chromium alloy combines outstanding corrosion resistance and high strength at elevated temperatures. The alloy is an about 2x as strong as Inconel grade 625 having excellent creep-rupture strength at temperatures to 1300¡ãF (700¡ãC) and usable up to 1800¡ãF (982¡ãC). Inconel grade 718 is often used in gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling.

The nickel content in UNS N08800 bars provides excellent resistance to chloride ion stress-related corrosion cracking, which in turn is another important feature of nickel alloy 800h round bars.

Alloy 800 has moderate corrosion resistance to many aqueous media and is resistant to stress corrosion cracking due to its nickel content. At high temperatures, it has resistance to oxidation, carburization and vulcanization as well as fracture and creep strength.

ASTM B462 UNS N08020 Slip On Flange The Alloy 20 is an austenitic niobium-stabilized alloy that contains nickel and low carbon. The chemical composition of Alloy 20 Flanges will mainly include nickel, chromium, and iron, along with some additional elements like molybdenum and copper. The Alloy 20 Flanges is known for its excellent corrosion resistance, even in harsh chemical environments. The Alloy 20 Pipe Flanges show great resistance capabilities in surroundings containing citric acids, phosphoric acids, sulfuric acid, and chlorides. The ASTM B462 Uns N08020 material is known for its good mechanical properties, even at elevated temperatures.

Alloy 800 plate is resistant to chloride ion stress corrosion cracking. Nickel 800 plate is also used in chemical and petrochemical processing. Nickel 800 plate is available in any length, cut to order or machined to customer requirements.

The bolt is a nickel-iron-chromium alloy with good strength and excellent resistance to oxidation and carburization in high temperature environments. Inconel 800HT Hex Bolts are an austenitic high strength solid solution Ni-Fe-Cr alloy with controlled levels of C, Al, Ti, Si and Mg with increased (Al + Ti) content. Inconel 800HT Heavy Duty Hex Bolts are used in a variety of applications involving exposure to corrosive environments and high temperatures, such as heat treatment equipment, chemical and petrochemical processing, nuclear power plants and the pulp and paper industry.

Alloy 800HT / Incoloy 800HT is a controlled composition derivative of INCOLOY? alloy 800H (UNS N08810) and is used for the same creep resistant applications, however the combined effects of mechanical and thermal processing of the alloy permit higher design stresses to be incorporated than are permitted for the conventional alloy.

ASTM B564 Incoloy 825 Flanges Incoloy 825 Flanges are one such type of flanges that have outstanding resistance to oxidizing as well as reducing acids. They are fabricated to improve their resistance to corrosion and are clean to weld

Incoloy 825 round bar is similar to Alloy 800 bar, but has better resistance to water corrosion. Incoloy 825 round bar has some resistance to oxidizing and reducing acids, stress corrosion cracking, and restricted corrosion such as crevice and pitting corrosion. Alloy 825 is particularly resistant to phosphoric and sulfuric acids.

An important feature of Incoloy UNS N08800 Elbow is that it not only exhibits good mechanical properties at ambient temperature conditions, but also performs well at high temperature settings up to 1000¡ãF.

Incoloy 825 alloy is a nickel-iron-chromium alloy that combines molybdenum, copper and titanium for excellent resistance to many corrosive environments. Incoloy 825 is very corrosion resistant. It has a high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenitic configuration.

Thermal processing equipment in industrial applications, such as baskets, trays, and fixtures. In chemical or petrochemical processing it is used for heat exchangers and piping systems in nitric acid media, especially where resistance to chloride stress corrosion cracking is required.

Alloy 718 Flange Grade 718 Inconel Flange is the most common grade of the hardenable Inconel. This precipitation-hardened nickel-chromium alloy combines outstanding corrosion resistance and high strength at elevated temperatures. The alloy is an about 2x as strong as Inconel grade 625 having excellent creep-rupture strength at temperatures to 1300¡ãF (700¡ãC) and usable up to 1800¡ãF (982¡ãC). Inconel grade 718 is often used in gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling.

The principle di?erence between alloys 800H and 800HT is the restricted aluminum and titanium content in 800HT, which results in higher creep and stress rupture properties.

Incoloy 825 round bar has excellent resistance to a variety of environmental and corrosive conditions such as stress corrosion cracking, reducing environments, oxidizing environments, pitting, crevice and intergranular corrosion. These circular die have excellent mechanical properties over a wide temperature range.

Alloy 800H Welded Pipes (also known as WNR 1.4958 Welded Pipe). Chemical and petrochemical processing industries use these UNS N08810 Welded Pipes for heat exchangers and other piping systems in nitric acid media especially where resistance to chloride stress-corrosion cracking is required. Power plants use them for super-heater and re-heater tubing.

Nickel 200 Slip On Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Incoloy 800HT seamless pipe is available up to 8″ NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 800HT tubing is available up 3″ OD. Incoloy 800HT redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity.

INCOLOY alloy 800 is used in a variety of applications involving exposure to corrosive environments and high temperatures.

At elevated temperatures it offers resistance to oxidation, carburization, and sulfidation along with rupture and creep strength.

Alloy 800H plate (UNS N08810 plate) is a widely used structural material for equipment that must have high strength and resist carburization, oxidation and other detrimental effects of high temperature exposure.

ASTM B705 Alloy 825 Welded Pipe Radioactive Waste Stream and Nuclear Fuel Reprocessing. Typically, nuclear power plants and radioactive processing plants release high thermal energy.

Nickel 800H reducing butt welded pipe fittings are also used in heat exchangers, dampers, pressure vessels, etc. Our Alloy 800HT Elbow Butt Weld Fittings can also be used in industrial furnaces and heat treating equipment.

Applications for ASME SB408 Alloy 825 round bar are chemically machined components, pollution control, vapor recovery, pickling tank components, and nuclear fuel processing. ASME SB408 Alloy 825 bar has excellent resistance to a variety of corrosive environments including oxidation and reduction.