Incoloy 800HT Elbows Provides Higher creep and rupture properties for high temperature situations

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Nickel is a costly commodity, which is why its use in an alloy elevates its cost.

Inconel 725 Nuts, also known as UNS N07725 Nuts, are highly corrosion resistant and age hardenable for extreme strength. It is used in a wide range of severely corrosive environments. Age hardened Alloy 725 nuts are twice as strong as annealed Alloy 625. Inconel 725 Hex Nuts are an excellent choice for the petrochemical and process industries. They are also commonly used in marine applications where high strength fasteners that resist seawater corrosion, pitting and crevice corrosion are required.

Super alloys are also referred to as high performance alloys. They have good creep and oxidation resistance, and are utilized where high surface stability is required. They also have an ability to function under high temperatures and mechanical stress. They can be strengthened by solid-solution hardening, work hardening, and precipitation hardening. They are divided into three groups such as iron-based, nickel-based, and cobalt-based alloys.

Incoloy 800HT ASTM B564 Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

The Alloy 800 series (Incoloy 800, 800H and 800HT) are nickel-iron-chromium superalloys that provide high temperature strength and resistance to oxidation, carburization and other types of high temperature corrosion. Alloy 800 (UNS N08800), Alloy 800H (UNS N08810) and Alloy 800HT (UNS N08811) have the same nickel, chromium and iron content, except for the total titanium and aluminium content (0.85 to 1.2%) to ensure optimum high temperature performance.

Incoloy 800, 800H and 800HT have nearly identical chemical composition and physical properties.

An important feature of Incoloy UNS N08800 Elbow is that it not only exhibits good mechanical properties at ambient temperature conditions, but also performs well at high temperature settings up to 1000¡ãF.

Incoloy 825 alloy is a nickel-iron-chromium alloy that combines molybdenum, copper and titanium for excellent resistance to many corrosive environments. Incoloy 825 is very corrosion resistant. It has a high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenitic configuration.

Incoloy 800HT seamless pipe is available up to 8″ NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Incoloy 800HT tubing is available up 3″ OD. Incoloy 800HT redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity.

Incoloy 800 Sheets are a combination of nickel, chromium and iron alloys with advantages and properties such as excellent oxidation resistance, high temperature carburization and medium or high strength and excellent resistance to name a few.

The 800H/AT is normally soldered with RA82 (ERNiCr-3) bare wire for applications up to 1450¡ãF. RA330-04 (N08334) bare wire provides closer thermal expansion coefficient matching, as well as higher strength.

ASTM B408 Incoloy 825 bar is titanium stabilized to resist pitting and intergranular corrosion after fabrication, especially welding, including heating in the critical sensitization temperature range (650¡ãC – 760¡ãC).

The Incoloy 800Ht Pipe is a slight modification to the 800H alloys. In these pipes the combined titanium and aluminum levels allow the pipes to work at slightly higher temperatures than the 800h alloys. Both these alloys can be dual certified and are preferred for use in high-temperature setups.

ASME B564 800 Incoloy Reducing Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 925 / Incoloy 925 / UNS N09925 is an age-hardenable nickel-iron-chromium alloy with additions of molybdenum, copper, titanium and aluminum. Each of these additions plays their part in making Alloy 925 a high strength alloy with excellent corrosion resistance. Alloy 925 is used in a variety of applications in the crude oil and natural gas industries because of its resistance to sulfide stress cracking and stress corrosion cracking, making it the perfect alloy for downhole and surface gas well components.

B564 UNS N08825?has copper present in it which makes it immune to brine and seawater.

This modification was to control carbon (.05-.10%) and grain size to optimize stress rupture properties. Incoloy 800HT has further modifications to the combined titanium and aluminum levels (.85-1.20%) to ensure optimum high temperature properties.

Alloy 800H is a solution heat treated (2100¡ãF/1150¡ãC), controlled-carbon version of alloy 800 with improved elevated temperature properties. It has improved creep and stress-rupture characteristics in the 1100¡ãF (593¡ãC) to 1800¡ãF (982¡ãC) temperature range.

Nickel 200 Slip On Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

The nickel content in UNS N08800 bars provides excellent resistance to chloride ion stress-related corrosion cracking, which in turn is another important feature of nickel alloy 800h round bars.

Titanium additions stabilize the alloy against intergranular corrosion susceptibility by appropriate heat treatment. The resistance of Incoloy? 825 to general and localized corrosion under a variety of conditions makes the alloy versatile.

Incoloy 800 Bolts and Incoloy 800HT Bolts can be easily welded and machined through standard shop fabrication practices. However, due to the high strength of the alloys, they require higher power process equipment than standard austenitic stainless steels. Meanwhile, Incoloy 800 fasteners are iron, nickel and chrome alloy fasteners. It has excellent resistance to oxidation and carburization at soaring temperatures. They remain very stable at extreme temperatures and retain their austenitic structure.

Incoloy 800H and 800HT are typically used in parts above 1100¡ãF where creep and fracture resistance is required. The chemical balance allows nickel steel alloys to exhibit excellent resistance to carburizing, oxidizing and nitriding atmospheres. Incoloy 800HT will not become brittle even after prolonged use in the 1200-1600¡ã F range where many stainless steels become brittle. 800HT exhibits the excellent cold forming qualities normally associated with Nichrome.

Incoloy Alloy 800HT applications have extended from petrochemical processing reformer tubing, to bellows and flare tips in refinery service. In power generation, superheater and reheater tubing has also employed the material.

Nickel Alloy DIN 2.4066 Slip on Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

They can also resist aqueous corrosion and hence can be used in marine applications.

Nickel. The heavy nickel content in Inconel alloys is one of the main sources of the magnetic properties of the alloys. Pure nickel is magnetic, even at room temperature, but is combined with elements such as chromium and carbon when making Inconel alloys.

ASTM B564 Uns N06600 Flanges nconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Incoloy 800HT is further modified with titanium and aluminium combined levels (0.85-1.20%) to ensure optimum high temperature performance. Nickel alloys are double certified (800H/HT) and combine the properties of both forms.

ASTM B462 UNS N08020 Slip On Flange Alloy 20 flanges provide good performance in hot sulfuric acid, specifically they offer good resistance to stress-corrosion cracking in boiling sulfuric acid at specific range of 20% to 40% concentration, as well as general sulfuric acid resistance.