incoloy alloy 600 pipe

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Monel400 Copper-nickel alloy (UNSN04400) is a soft Copper-nickel alloy that is resistant to various corrosive environments.

Alloy 22 (UNS N06022) is the most versatile Nickel Chromium Molybdenum Tungsten alloy with controlled Iron. Due to Alloy 22’s content this alloy exhibits excellent resistance to both oxidising and reducing acid environments as well as those containing mixed acids.

Hastelloy B2 Welded Pipes is a wrought nickel-molybdenum alloy that can be used in the ¡®as welded¡¯ condition.

Hastelloy B2 resists the formation of grain boundary carbide precipitates in the weld heat-affected zone, making it suitable for most chemical process applications in the as-welded condition. The heat-affected weld zones have reduced precipitation of carbides and other phases to ensure uniform corrosion resistance.
Alloy B2 also has excellent resistance to pitting and stress corrosion cracking.Steel pipes can be disintegrated on the basis of its application.Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes ,tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Hastelloy tube has a melting point of 1370 degrees Celsius and is used in power generation, petrochemical, gas processing and chemical equipment. In addition, Werkstoff 2.4819 Hastelloy c-276 tubing is used in industries such as seawater equipment, offshore oil drilling, and paper and pulp.

Inconel Alloy Tubes are readily brake or roll formed into a variety of parts for applications in the industrial, architectural, and transportation fields.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Polished nickel tubes and sleeves are some variants for special purposes. Sometimes used as a composite tube. Nickel alloy composite pipe is a fusion of corrosive pipe and non-corrosive nickel pipe. With nickel’s corrosion-resistant properties, other metal pipes can be clad or covered to ensure cost-effectiveness while eliminating corrosion. Compared with ordinary metal pipes, pure nickel alloy welded pipes are expensive, but the benefits are better.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.37

The Nickel 201 Pipes are one of the desirable materials with excellent mechanical properties and strengthened qualities. They are used commercially in industries due to its temperature resistant and corrosion resistant properties.

ASTM B163 Alloy 825 Seamless Pipe product is a nickel molybdenum chromium superalloy with the addition of tungsten, designed for excellent corrosion resistance in a wide range of harsh environments.

La aleacion tambien es resistente a soluciones y compuestos de cloruro, muchos de los cuales son altamente corrosivos. Por ejemplo, los reductores de aleacion de niquel C276 son resistentes no solo a los medios organicos e inorganicos termicamente contaminados, sino tambien a los cloruros ferricos y c¨²pricos, asi como al cloro, el agua de mar y la salmuera.

800H can not be corroded in many kinds of media. Its higher nickel content made it have good stress corrosion resistance cracking properties in the water corrosion condition. High chromium content made it better resistance to pitting and crevice corrosion cracking. This alloy can resist nitric acid and organic acid, but it is not so fine in the sulfuric acid and hydrochloric acid.
800H have good corrosion resistance to both oxidation and non-oxidizing salt, but maybe a little pitting in halide, and also excellent properties in the mixture of water, smoke, steam, air and carbon dioxide.

Typical applications for the alloy include ethylene pyrolysis, hydrocarbon cracking, cracking furnaces for vinyl chloride, diphenol and acetic acid. The alloy is also used for valves, fittings and other components exposed to corrosive attack from 1100 to 1800 deg F.

Alloy 825 (UNS N08825) is an austenitic nickel-iron-chromium alloy with additions of molybdenum, copper and titanium. It was developed to provide exceptional corrosion resistance in both oxidizing and reducing environments. The alloy is resistant to chloride stress-corrosion cracking and pitting. The addition of titanium stabilizes Alloy 825 against sensitization in the as-welded condition making the alloy resistant to intergranular attack after exposure to temperatures in a range that would sensitize unstabilized stainless steels. The fabrication of Alloy 825 is typical of nickel-base alloys, with material being readily formable and weldable by a variety of techniques.

Hastelloy B-3 is a nickel-molybdenum alloy with excellent resistance to pitting, corrosion, and stress-corrosion cracking plus, thermal stability superior to that of alloy B-2. In addition, this nickel steel alloy has great resistance to knife-line and heat¨Caffected zone attack.

The tungsten element of Hastelloy C276 pipe makes it suitable for this welding, Hastelloy C276 seamless pipe can be easily welded to other objects.

This alloy is having chemistry design for achieving thermal stability level that is superior to predecessors like B2 alloy. It is having good resistance to corrosion, pitting and stress corrosion cracking and to knife line as well as the heat affected zone attack.

That’s why our customers prefer to work with nickel alloy tubes. In addition, nickel alloy tubes have good thermal, electrical and magnetostrictive properties. The relatively high thermal conductivity of this grade of nickel tubing results in its frequent use as part of heat exchangers.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.27

625 alloy has excellent corrosion resistance to various corrosion media in oxidation and reduction environment

Incoloy Alloy 600 Tubes are available in numerous grades that provide enhanced protection against aggressive forms of corrosion. Incoloy Alloy 600 Tubes are commonly utilized within high temperature applications that require a metal that can withstand highly acidic and corrosive environments. Incoloy Alloy 600 Tubes provide the following beneficial qualities.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Inconel Pipes is not useful in oxidizing acids, such as nitric acid and nitrous. Nevertheless, Inconel ERW Pipes is resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at normal and elevated temperatures.

Alloy C 276 (UNS N10276/ 2.4819) is known for its corrosion resistance in a variety of corrosive media. The high molybdenum content imparts resistance to localized corrosion such as pitting. Low carbon minimizes carbide precipitation during welding to maintain the resistance of the welded joint heat affected zone to intergranular erosion. It is used in chemical processing, pollution control, pulp and paper, industrial and municipal waste treatment, and recovery of “sour” natural gas. Applications in air pollution control include stack liners, ducts, dampers, scrubbers, stack gas reheaters, fans and fan guards. In chemical processing, the alloy is used to make components such as heat exchangers, reaction vessels, evaporators and transfer piping.

A Inconel 800H Seamless Pipe is designed by passing hot steel billets through an extruded metal grade to shape them precisely.

1. Piling Project
2. Heat-Supply Project
3. Conveying Drinking Water,Drainage,Coal Gas,Fuel Gas,Mine Slurry And Other Low & Middle Pressure Fluids
4. Api5L Petroleum And Natural Gas Pipeline
5. Chemistry Industry
6.Electric Power Engineering Circulating Pipe

Monel 400 is also often used for the high tolerance tubing. It exhibits excellent weldability, and it is often found in marine applications such as seawater valves and pump shafts. These tubes are also used in chemical plant equipment, boiler feeders, and heat exchangers. For applications that require a high melting point and toughness under the harshest conditions.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

One of our products is Alloy Steel A335 P91 Pipe. We supply Alloy Steel A335 P91 Pipe in different thicknesses and sizes to successfully meet the prerequisites identified by the customer. We offer these alloy steel A335 P91 pipes with excellent integrity, dimensional accuracy, high caliber and reasonable cost.

La aleacion C276 se considera una de las listas de productos de superaleaciones. Las superaleaciones (o metales especiales) se utilizan en entornos hostiles debido a su capacidad para manejar condiciones corrosivas.

INCOLOY alloy 800 (UNS N08800/W. Nr. 1.4876) is a widely used material for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500¡ãF (816¡ãC).

In addition to a high melting point and resistance to oxidation and corrosion, nickel alloys are also highly ductile. They can be plated and are easy to solder, making them suitable for industries that require very high and very low temperatures.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.22

Alloy 800H Welded Pipes (also known as WNR 1.4958 Welded Pipe). Chemical and petrochemical processing industries use these UNS N08810 Welded Pipes for heat exchangers and other piping systems in nitric acid media especially where resistance to chloride stress-corrosion cracking is required. Power plants use them for super-heater and re-heater tubing.