Incoloy bar Incoloy 800 Incoloy 800H Incoloy 800HT Incoloy 825 Incoloy 926 bar

Round bars are cold drawn and annealed, available in stock lengths or cut to size. Alloy round bars provide strength and corrosion resistance in a variety of environments and can be used in the frame, machine part manufacturing, food service and medical device industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Inconel 600 is a nickel-chromium-iron alloy with excellent corrosion resistance, oxidation resistance and high strength at elevated temperatures. Due to its high nickel content, Inconel 600 is extremely resistant to chloride ion stress corrosion cracking. Age hardening is not required as Inconel 600 is hardened and strengthened by cold work only. The Inconel 600 can operate in temperatures as low as 700¡ãF (370¡ãC).
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Nickel 200 is a solid solution strengthened metal. Nickel 200 Bar Stock contains 99.6% wrought nickel by weight and is considered commercially pure nickel. DIN 2.4066 Bar has good mechanical and physical properties. For example, ASTM B160 N02200 has excellent resistance to many corrosive compounds as well as corrosive environments. Meanwhile, Nickel 200 is a solid solution strengthened wrought alloy that can be designed as round bars and rods. These two components are used interchangeably and can be distinguished from certain key functions.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Incoloy 800 round bars contain up to 35% nickel, up to 23% chromium and up to 39.5% iron. Incoloy 800 alloy round bars also contain carbon, molybdenum and silicon content. Incoloy 800 threaded rods can be used effectively at temperatures up to 600 degrees Celsius.

Incoloy 800 is part of austenitic steels. Inconel 800 Flat Bars are composed of high quality nickel, chromium, iron, manganese, molybdenum and other alloys. Uns N08800 round bars are designed with a rectangular cross-section.

The alloy 601 also has good resistance to aqueous corrosion.

Incoloy Alloy 800 Round Rods are used in a wide range of applications such as nitric acid catalyst supports, reformer outlet pigtails and manifolds, heat exchangers, pressure vessels and dampers.

Typical applications for Monel K500 grade rods include those tasks that take advantage of the alloy’s high tensile strength and corrosion resistance. For example, Monel B865 K500 forged bar can be used to make impellers, propeller shafts, pump shafts.

Like other nickel alloys, HASTELLOY C-22 alloy is fairly ductile, has excellent weldability, and is easily fabricated into industrial parts. It is available in sheet, sheet, strip, billet, bar, wire, tube and tube. Typical applications may include: reactors, heat exchangers and columns.

The outstanding characteristic of Inconel 600 is its resistance to high-temperature oxidation.

Alloy 718 is a nickel-chromium alloy that is easy to manufacture and has excellent welding characteristics, especially where resistance to post-weld cracking is required.

Inconel 600 threaded rod is Inconel, a common engineering material used in applications requiring corrosion and temperature resistance. The chromium content of Alloy 600 threaded rod makes it greater than commercial pure nickel in rusted conditions. The tensile strength of this bar is Psi 95,000, MPa 655, while the melting point is also discussed Melting point: 1413 C.

INCONEL alloy 718 is ideal for use in these circumstances.Inconel 718 can be easily machined and elongated by 30%.

Inconel 601 is an alloy of nickel and chromium. Inconel 601 round bar has excellent strength and excellent corrosion resistance. These rods are sufficient in extreme temperature systems up to 1250 degrees Celsius and do not deform or dissociate easily under any pressure.

Hastelloy G30 is a nickel-based alloy with a high chromium content that provides superior corrosion resistance to commercial phosphoric acid and many highly oxidizing acid media.

Hastelloy C276 alloy hollow rods tend to exhibit excellent resistance to localized corrosion and oxidizing media as well as reducing media.

The basic composition of Hastelloy C276 round bar alloy is chemically composed of three elements, which are nickel, molybdenum and chromium.

The versatility of ASTM B166 600 Inconel Rod has led to the alloy being used in a variety of applications, especially those involving a temperature range from cryogenic to above 2000¡ãF.

Monel 400 has excellent corrosion resistance in hot concentrated alkaline solution. Monel 400 also resistant to corrosion of neutral solution, water, sea water, atmosphere and organic compounds.

Another important feature of Inconel 625 bar is its enhanced corrosion resistance. UNS N06625 Bar is resistant to a wide range of severe corrosive environments.

Compared to Alloy 718, Alloy 625 has higher corrosion resistance in high temperature environments.

Due to the solid solution effect of refractory metals, it has excellent toughness and strength in the temperature range from low temperature to 2000¡ãC (1093¡ãC). This Inconel grade can withstand stress cracking up to 1200¡ãC (649¡ãC) and is resistant to oxidation and oxidation up to 2000¡ãC.

Steel bars are widely used in industrial maintenance, farm implements, transportation equipment, decorative iron products, fences, artwork, etc. This steel shape is easy to weld, cut, form and drill with the proper equipment and knowledge.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

While each variation of Inconel has unique traits that make it effective in different circumstances, the majority of the alloys are used frequently in the chemical industry.Its welding characteristics,
especially its resistance to postweld cracking, are
outstanding

Alloy 926 is a super austenitic molybdenum stainless steel with excellent resistance to a variety of highly corrosive environments. The combination of molybdenum and nitrogen in its composition resists pitting and crevice corrosion, while copper improves sulfuric acid resistance, while nitrogen increases yield and tensile strength.

Incoloy Alloy 800 Round Rods are used in a wide range of applications such as nitric acid catalyst supports, reformer outlet pigtails and manifolds, heat exchangers, pressure vessels and dampers. Our products are developed through market research and are sustainable in changing market trends. Incoloy 800 Bars is another nickel-chromium alloy that is resistant to high temperatures and corrosion.

Alloy 825 rods are good electrical conductors and can also be used for many electrical purposes. These nickel 825 rods resist intergranular corrosion in the as-welded condition. Nickel 825 Round Rods have a high level of resistance to a variety of oxidizing species including nitric acid, nitrates and oxidizing salts. We also offer our customers a variety of custom sizes and shapes.

Common applications of aluminum round bar include supports, trim, shaft, braces, pins, and dowels. Brass round bars are used when strength, electrical conductivity, corrosion resistance, and spark resistance are important. Brass is easy to machine and has an attractive sheen when polished.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

ASTM B408 Incoloy 825 bar is titanium stabilized to resist pitting and intergranular corrosion after fabrication, especially welding, including heating in the critical sensitization temperature range (650¡ãC – 760¡ãC).

The main applications for the engineering grades 90-10 and 70-30 copper-nickel alloys are in seawater piping, heat exchangers and condensers.

The inconel 718 Cold Finished Bar is formed after the hot-rolling process comes to an end.

Nickel alloy 601 rods consist of 58-63% nickel. Inconel is a general purpose nickel-chromium-iron alloy. It is popular as an engineering alloy and 601 is best suited for applications requiring heat and corrosion resistance.

Inconel X750 is a superalloy that has excellent properties enabling it to exhibit high strength at high temperatures, excellent corrosion resistance, and good oxidation resistance up to 1300¨H.