incoloy plate

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Another important feature of the N08800 Incoloy Alloy 800 Cold Rolled Plate is its excellent resistance to chlorine ion stress related corrosion cracking, to which the metal, like its other Inconel counterparts is virtually immune to.
Type Plate, Sheet,Strip Coil
Length 0~12m or as per your requirements
Width 0~2500mm or as per your requirements
Thickness 0.3~1200mm or as per your requirements

Steel Plate are often used for structural and construction applications, pressure vessels, marine and offshord equipment, and military applications. The grade, elements and parameters of a steel plate are also important in how it is used.
Steel plates are classified by thickness: thin plate, medium plate, thick plate and extra-thick plate.
Thin steel plates are steel plates with a thickness between 0.2-4mm produced by hot rolling or cold rolling, and thick steel plates are those with a thickness of more than 4mm
The general name of the good board.
Thin steel plate refers to a steel plate with a thickness of not more than 3 mm. The commonly used thin steel plate thickness is 0.5-2MM, which is divided into sheet and coil supply. Thin
The steel plates are generally B-type steels, cold-rolled or hot-rolled steel plates with steel grades B0-B3. Requirements for thin steel plates: smooth, smooth surface, thick
The degree of uniformity, allowing a tight iron oxide film, must not have cracks, scarring and other defects. The process is divided into hot rolled sheet steel and cold rolled sheet
plate. Mainly used in Changlin Dongfeng fans, automobiles, electrical equipment, vehicles, agricultural machinery, containers, steel furniture, etc.
Thick steel plates refer to steel plates with a thickness greater than millimeters. Thick steel plate is divided into extra-thick steel plate and medium-thick steel plate.
Medium and heavy steel plates refer to steel plates with a thickness greater than 3 mm and less than 50 mm. Medium and thick steel plates are mainly used in shipbuilding, boilers, bridges
Armor and high-pressure vessel shells, etc.
Extra-thick steel plate refers to a steel plate with a thickness of not less than 50 mm. Extra-thick steel plates are mainly used in shipbuilding, boilers, bridges and high-pressure vessel shells
blog.

The alloy 20 coil has a density of 8.1 g/cm3. These coils are known for their excellent resistance to carburization after welding. They are easy to clean and maintain.

Hastelloy C276 Sheets is a solid-solution-strengthened, nickel-molybdenum-chromium alloy with a small amount of tungsten, which exhibits excellent corrosion resistance in an assortment of harsh environments.

Inconel 825 is a nickel alloy that can be used in businesses that handle high thermal reactions. For example, Inconel 825 round bars are commonly used in industries such as air pollution control, chemical and petrochemical, steel pickling, ore processing, petroleum refining, offshore oil and gas production, food processing, and waste disposal.

Hastelloy UNS N10276 sheets that are ideal for various sectors and meet our clients’ needs. We manufacture ASTM B575 Hastelloy C-276 plates in a variety of sizes and specifications.

Hastelloy C276 Sheets, Plates and Coils (also referred as WNR 2.4819) that are actually manufactured from High Quality of Standard Raw Materials and are designed as per with national and international standards.

Because Inconel 718 alloy maintains good corrosion resistance and excellent oxidation resistance, SB670 Inconel 718 strip can be used in parts requiring high creep and stress rupture resistance up to 1300¡ãF and oxidation resistance up to 1800¡ãF temperature range.

Incoloy 825 plate has high corrosion resistance. It contains high nickel content which is sufficient to chloride ion stress corrosion cracking resistance, and a very stable austenite structure.
Type Plate, Sheet,Strip Coil
Length 0~12m or as per your requirements
Width 0~2500mm or as per your requirements
Thickness 0.3~1200mm or as per your requirements

The Hastelloy stainless steel plates are having low-carbon they can also withstand to the corrosive effect of the wet chlorine gas, hypochlorite and chlorine dioxide.

For high temperature applications requiring optimum rupture and creep properties, Alloy 800H Plate (UNS N08810 Plate) and Alloy INCOLOY 800HT Coil (UNS N08811 Coil) are used. These are also known as WNR 1.4876Sheets, WNR 1.4958 Plates, and WNR 1.4859 Coils.

Hastelloy c276 sheets Coils, which has excellent resistance to pitting, crevice corrosion and stress corrosion cracking. Pulp and paper production for example is in need of our Hastelloy C276 Plates that can withstand the chemicals used for the treatment of certain types of paper.

Alloy C276 plate is a high strength grade designed to be thicker than 6mm. The panels have a minimum tensile strength of 601mpa and a minimum yield strength of 204.8mpa. C276 composite panels are made by bonding two or metals in place. Meanwhile, Alloy C276 is resistant to oxidation at 1800¡ãF in the open air. However, alloy C276 is generally not recommended for high temperature service. The high molybdenum content makes alloy C276 prone to catastrophic oxidation under stagnant conditions, such as under solid deposits.

Alloy 800 Coils are also used in extruded tubing for ethylene and steam methane reformers. The higher creep rupture strength of the Nickel 800 sheet is a result of the aluminum, carbon and titanium content.

Alloy 20 Plate or Alloy 20 is specially designed to deal with sulfuric acid. Its layers of nickel, chromium, molybdenum and copper all provide excellent novel corrosion resistance. Confined carbon plus columbium stabilization allows welding to be used in corrosive environments, usually without the need for heat treatment on the weld. At 33% nickel, Alloy 20 has practical immunity to chloride strain corrosion cracking. This alloy is often chosen to address SCC issues, which can also occur in 316L stainless steel.

Alloy 20 is an austenitic nickel-iron-chromium alloy with copper and molybdenum added for maximum resistance to attack by acids, especially sulfuric acid.

Incoloy 800HT will not become brittle even after prolonged use in the 1200-1600¡ã F range where many stainless steels become brittle. 800HT exhibits excellent cold forming properties typically associated with Nichrome. When cold forming is extensive, the grain size produces a distinct undulating surface known as “orange peel”. Incoloy 800HT can be welded by common techniques used on stainless steel.

UNS N08800 sheet has been used in a variety of industries and has become a mainstay in high temperature, high exposure applications.

Alloy C-276 (UNS N10276) is known for its corrosion resistance in a wide range of aggressive media. The high molybdenum content imparts resistance to localized corrosion such as pitting.
Type Plate, Sheet,Strip Coil
Length 0~12m or as per your requirements
Width 0~2500mm or as per your requirements
Thickness 0.3~1200mm or as per your requirements

INCONEL 800H/HT – Alloy 800 (UNS N08800/1.4876) is a widely used material for equipment construction requiring corrosion, heat, strength and stability up to 1500¡ãF (816¡ãC) . Incoloy Inconel Alloy 800 has moderate corrosion resistance to many aqueous media and is resistant to stress corrosion cracking due to its nickel content.

Alloy 800H plate (UNS N08810 plate) is a widely used structural material for equipment that must have high strength and resist carburization, oxidation and other detrimental effects of high temperature exposure.

Hastelloy C276 is a corrosion-resistant nickel-molybdenum-chromium alloy that is widely used in a variety of industrial applications, particularly in environments where strong acids and oxidizing agents are present.

Alloy C276 Coils are often used in Pollution control, chemical processing, Waste treatment, Marine engineering, Pulp and paper production, and more.

Inconel 825 or Alloy 825 can be used for round bar, pipe, tube, sheet and plate. Inconel 825 is used in oil and gas or petrochemical applications and some marine and sour environments.

Incoloy 825 is a nickel-based alloy generally similar to Alloy 20 in water corrosion. It has useful resistance to boiling sulfuric acid up to 40% strength, 60% strength at 176¡ãF, and 150¡ãF at all concentrations.

Hastelloy C276 Plates, which has excellent corrosion resistance in reducing environments. Inconel C276 Plates is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments.

The uns n08020 plate has a minimum tensile strength of 551MPa and a minimum yield strength of 241MPa. With this strength, the board is suitable for storage tanks, containers and panels.

These Hastelloy C276 contain a mixture of molybdenum, nickel and chromium species. Like other nickel alloys, it is ductile, easy to form and weld, and has excellent resistance to stress corrosion cracking (a form of easily degradable austenitic stainless steel) in chloride-containing solutions. Due to its high chromium and molybdenum content, it is resistant to oxidizing and non-oxidizing acids and exhibits excellent resistance to pitting and crevice corrosion in the presence of chlorides and other halides.

Inconel 718 plate suppliers point out that, in addition to relatively good weldability, this alloy has good formability and excellent low temperature properties compared to other precipitation hardening nickel-based alloys.

Nickel 718 plate has higher strength than Inconel X-750 and better mechanical properties at lower temperatures than Nimonic 90 and Alloy X-750. Nickel 718 coils offer excellent solderability compared to aluminum and titanium hardened nickel-based superalloys.

Hastelloy C276 plates are referred to as excessive-alloy steels, which have superb corrosion resistance in assessment with different steels as they include greater chromium.