Inconel 600 Bushing to elevated temperatures in the range of 2000 deg F

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

The alloy also resists ammonia bearing atmospheres, as well as nitrogen and carburizing gases.

Typical corrosion applications include titanium dioxide production (chloride route), perchlorethylene syntheses, vinyl chloride monomer (VCM), and magnesium chloride.

For shielded metal – arc welding, these Inconel 625 Socket Weld Flanges has excellent operability. Post-weld heat treatment of Inconel 625 Weld Neck Flanges is not necessary to maintain corrosion resistance. Due to ability of Inconel 625 fasteners to prevent, stress, crevice and pitting corrosion, it is utilized in a diversity of corrosive environments. In mild applications such as atmosphere, fresh or salt water, neutral salts and alkaline media is is almost completely resistant. In more severe situations the nickel and chromium content provides resistance to oxidizing chemicals.

By itself, nickel has great heat resistance properties, but when alloyed with other elements, it gains many properties, just like in the case of the Inconel 600 Flanges.

This nickel steel alloy is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition.

Inconel 601 fasteners are designed to withstand severe corrosion and high temperature exposure. These fasteners contain nickel and chromium alloys for excellent corrosion, heat and oxidation resistance. Nickel content retains ductility and high temperature strength after prolonged use. Fasteners of this grade produce a tightly adherent scale that resists spalling under severe thermal cycling conditions.

Inconel 718 elbows are commonly used in gas turbine engine parts, wellhead completions and blowout preventers (BOPs).

The Inconel 625 Tubing solutions also possess superior resistance to high-temperature effects like oxidation and carburization. Our Alloy 625 Grade 2 Exhaust Tubing solutions are widely used as control and instrumentation tubes.

Unlike austenitic stainless steels, Inconel 625 round bars offer the advantage that they are less susceptible to chloride-induced stress-related corrosion cracking.

Inconel 625 exhibits high resistance to corrosion and oxidation, high strength and toughness, and excellent fatigue strength. This nonmagnetic, nickel-based alloy also offers an extremely broad working temperature range¡ªfrom cryogenic to 2,000¡ãF (1,093¡ãC).

We are a Manufacturer, Trader, Stockist, Supplier and Exporter of Corrosion and High Temperature Inconel 600 Fasteners. Our WNR 2.4816 Inconel 600 Fasteners are hardware devices that are permanently or temporarily mechanically fastened or clamped. They can also be installed and removed quickly.

Inconel 625 round bars can be manufactured in hot-worked bar form per ASTM B446 specification. These properties specified by ASTM B446 for 2.4856 Inconel 625 hexagonal bar include the tensile strength, yield strength and elongation properties of the material.

INCONEL 601 Welding Neck Flanges Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Inconel 601 (UNS N06601 ) nickel-based alloy density: 8.42 g/cm3 (grams/cubic centimeter).

One of the most widely used general purpose grades of hardenable Inconel alloys, Inconel 718 contains chromium-nickel with minor additions of aluminum and titanium.

The properties of Inconel 601 make it a material with a wide range of uses in thermal processing, chemical processing, pollution control, aerospace and power generation. However, Alloy 601 is not recommended for use in strongly reducing, sulfur-containing environments.

If used in the paper industry, the ANSI B16.5 Slip on Flange has a good notable performance. Also, the Inconel 600 Weld Neck Flange has excellent immunity to chlorine ion stress corrosion cracking.

ASTM B564 Nickel Alloy 200 Threaded Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Alloy31 is a nitrogen-added iron-nickel-chromium-molybdenum alloy. This alloy fills the gap between special alloys austenitic stainless steels and nickel alloys. Alloy 31 has been proven in the chemical and petrochemical industries, ore extractors, environmental and marine engineering, and oil and gas production.

The results reveal that Inconel 625 is excellent in resist the corrosion attack in seawater. However, at increasing temperature, the corrosion resistance of this metal decrease.

Inconel 718 flanges have good resistance to oxidation and corrosion at temperatures within the effective strength range of the alloy in atmospheres encountered in jet engine and gas turbine operation.

Inconel 600 pipe is a chromium-nickel alloy designed for use at temperatures up to 2000 F and down to as low as cryogenic levels. The alloy is resistant to reducing environments as well as chloride stress corrosion cracking due to its nickel content and resistant to weaker oxidizing conditions through its chromium content. Alloy 600 seamless nickel pipe is an austenitic alloy with high nickel content that is non-magnetic and has excellent mechanical properties at both elevated temperatures and cryogenic temperatures. Werkstoff NR 2.4816 Pipes have common applications in gas turbine blades, seals, and combustors, and turbocharger rotors and seals, electric submersible well pump motor shafts, high temperature fasteners, and so on. We are manufacturer, stockiest and exporter of ASTM B829 Inconel 600 Seamless Pipe and we offer these pipes in custom-made sizes and thicknesses, as per the exact demands of our admired clients.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Alloy 718 fasteners are a major hardware element almost everywhere, whether it’s home appliances, machinery, automobiles, buildings, infrastructure, or any other item that needs to be assembled, there will definitely be fasteners to hold them all together.

Resistant to a wide range of corrosive media. The chromium content gives better resistance than Alloy 200 and 201 under oxidizing conditions, at the same time the high nickel gives good resistance to reducing conditions.

Under alternating oxidizing and reducing conditions the alloy may suffer from selectiveo xidation.

The alloy resists a wide range of corrosive environments and has a good resistance to pitting and crevice corrosion. IN625 has good corrosion resistance in various corrosive environments.

The Inconel 625 is highly resistant against corrosion and oxidations mediums in various environments.

Inconel 625 was developed in the 1960s to create a material that could be used in steam pipes. Some modifications have been made to its original composition to make it more creep resistant and weldable.

Inconel 601 Flanges are made up of a nickel chromium alloy. The material grads range differently with the composition ratio. The 601 grade has 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron in the composition.

alloy 200 weld neck flange The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.