inconel 625 2.4856 N06625 pipe with flanges butt weld tee and elbows

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

UNS NO2200 WN Flangs Nickel 200 is a 99.6% pure nickel alloy and one of the toughest metals in existence. It exhibits excellent mechanical properties and high thermal and electrical conductivity. Additionally, Nickel 200¡¯s beneficial properties and its chemical composition make it easily fabricable and highly resistant to corrosive environments

Alloy 600 has good hot and cold workability in the annealed condition. Hot-working should be done above 1600¡ãF (871¡ãC) to ensure adequate ductility, while cold work should be performed below 1200¡ãF (649¡ãC).

Pipelines for gathering sour gas have been built with solid (or clad) INCONEL? 625 alloy and used in seawater heat exchangers in refineries, power plants, and offshore topside services that often need this material.

Inconel 600 bolts can be stretched up to 40% and still have excellent machinability. This Alloy 600 bolt has excellent creep rupture performance at elevated temperatures. These bolts are widely used in the petrochemical, chemical and natural gas industries.

Long butt weld flanges, also known as LWN flanges, are similar to the standard. Weld neck flange, but the neck is much longer.

The microstructure of Inconel 718 will not separate alloying elements in the heat affected zone or cause welding difficulties due to cracking.

Inconel 601 is an alloy composed of nickel and chromium.

Other popular nickel-chromium alloys are age hardened through the addition of aluminum and titanium.

The Alloy 625 Blind Flanges and other types also have very high melting point of 1350 degrees Celsius. The high melting point allows the flanges to be used in high temperature applications along with the strengths allowing these for high pressure applications as well.

Inconel 625 Material can be used as propeller blades for motor patrol gunboats, wire rope for mooring cables, submarine auxiliary propulsion motors, sheathing for undersea communication cables, submarine quick disconnect fittings, exhaust ducts for Navy utility boats, submarine transducer controls, and steam-line bellows. We have built and designed our products to meet market demands and requirements. We deliver products that are 100% durable.

Unlike chrome-nickel steel, this steel does not reduce corrosion resistance due to carbide precipitation. Inconel WNR 2.4668 Nuts are used in excellent procedures including welding materials to more or less materials of the same chemical composition, this is used in the manufacture of tools for the management of sulfuric and phosphoric acids.

It is used in high stress applications at elevated temperatures. The Inconel 625 Tube can be used in heat exchangers, condensers and in boiler components for this reason.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Inconel 625 Flanges are a corrosion-resistant and strong nickel-chromium alloy with 58% nickel and 20% chromium, carbon, manganese, silicon, sulfur, copper, and iron. The flange material has a tensile strength of 930MPa and a yield strength of 517MPa.

Thus precipitation hardening treatments are not required. This combination of elements also is responsible for superior resistance to a wide range of corrosive environments of unusual severity as well as to high temperature effects such as oxidation and carburization.

The Inconel 600 Seamless Pipes have many features like good workability, durability, readily weldable, high strength and mechanical property as well. There are various types of Inconel 600 pipes are available such as welded, seamless, square, rectangular, thick wall, thin wall, electro polished, etc.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

ASTM B637 UNS N07718 is a nickel-chromium-molybdenum alloy designed to eliminate a wide range of severe corrosion conditions, pitting and crevice corrosion. It also exhibits extremely high tensile, yield and creep rupture properties at elevated temperatures. It is suitable for long-term use from low temperatures to 1200¡ãF. One of the defining features of the composition of B637 UNS N07718 is the addition of niobium to allow age hardening, which facilitates welding and annealing without unforced hardening during heating and cooling.

As an alloy, Inconel 625 consists primarily of nickel, chromium and molybdenum. In addition to these three main metals, trace amounts of niobium are added to the alloy. Alloying any metal will not only enhance its physical properties, but also its mechanical properties. At this point, the addition of molybdenum and niobium to ASTM B446 Inconel 625 forged bar helps strengthen the alloy matrix. The rigid matrix of Alloy 625 bar provides high tensile strength without the use of strengthening heat treatments.

Inconel 718 is a molybdenum, chromium and nickel based alloy developed to resist a wide range of severely corrosive atmospheres, crevice corrosion and pitting corrosion.

Inconel 718 Elbow Fittings offer excellent weldability compared to aluminum and titanium hardened nickel-based superalloys.

Inconel 718 Welded Pipe is a nickel-chromium-molybdenum alloy designed to resist a variety of severe corrosive environments, pitting and crevice corrosion. Inconel 718 EFW pipe is a nickel-chromium alloy that is precipitation hardenable with high creep rupture strength at elevated temperatures up to approximately 1300 degrees Fahrenheit (700 degrees Celsius). Inconel 718 ERW tube has excellent mechanical properties at high and low temperatures.

Inconel 625 round bar is extremely corrosion resistant in a variety of extremely corrosive environments.

By itself, nickel has great heat resistance properties, but when alloyed with other elements, it gains many properties, just like in the case of the Inconel 600 Flanges.

Inconel 718 is a precipitation hardening nickel-chromium alloy containing large amounts of iron, niobium and molybdenum, and small amounts of aluminum and titanium. 718 material maintains high strength and good ductility at temperatures up to 1300¡ãF (704¡ãC). Compared with other precipitation hardening nickel alloys, this alloy has relatively good weldability, formability and excellent low temperature properties. The alloy’s slow precipitation hardening reaction makes it easy to weld without hardening or cracking. Inconel? Alloy 718 is non-magnetic. It maintains good corrosion and oxidation resistance for applications requiring high creep and stress-rupture resistance at temperatures up to 1300¡ãF (704¡ãC) and oxidation resistance up to 1800¡ãF (982¡ãC) parts.

Nickel Alloy 600 is a solid solution of its elements and cannot be strengthened by heat treatment. Cold working will result in increased strength. Heat treatment can remove any undesirable effects of cold work.

Inconel 718 also has excellent creep rupture strength at temperatures up to 1300¡ãF or 700¡ãC. Although Inconel 718 Studs can withstand temperatures up to 1800¡ãF or 982¡ãC, the tensile strength of these Inconel 718 Studs can be further increased by cold working to AMS 5962.

Apart from this, they can be easily elongated by 30% and still possess excellent workability.

625 alloy has excellent corrosion resistance to various corrosion media in oxidation and reduction environment

Alloy 600 is machinable in both hot and annealed conditions. Due to the large amount of heat generated when machining this alloy, high-speed steel, cast non-ferrous or carbide tools should be used.

ASTM B564 601 Raised Face Flange nconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

INCONEL 718 is a high nickel superalloy commonly used in the oil and gas, petrochemical and gas turbine industries. It has excellent mechanical strength, in addition to high corrosion resistance.