INCONEL 625 alloy pipe and spool drawings

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 625 is an alloy that also performs well at lower temperatures. Temperature changes can cause the alloy tube to expand or contract. Therefore, materials with good ductility, such as Inconel 625 pipe, should be selected for piping systems with temperature fluctuations, especially because of their good properties.

Nickel Alloy 600, also sold under the brand name Inconel 600. It is a unique nickel-chromium alloy that is known for its oxidation resistance at higher temperatures.

Inconel 718 alloy ranks first among deformed superalloys in yield strength below 650°C, and has good fatigue resistance, radiation resistance, oxidation resistance and corrosion resistance, as well as good workability, weldability and long-term structural stability , can manufacture various shapes of complex parts, in the aerospace, nuclear energy, petroleum industry, has been widely used in the above temperature range.

Inconel 600 can be used where end use requires high surface stability. As a superalloy, Inconel 600 is known to have good creep and good oxidation resistance.

Post-weld heat treatment of Inconel 625 Weld Neck Flanges is not necessary to maintain corrosion resistance. In order to restore the best balance of properties, all hot or cold worked parts of these Inconel 625 Threaded Flanges should be annealed and rapidly cooled. In more severe situations the nickel and chromium content provides resistance to oxidizing chemicals. Inconel 625 (2.4856) fasteners and flanges are also resistant to nonoxidizing environments. Better understand Inconel 625’s corrosion resistance to:
Sulfuric Acid
Hydrochloric Acid
Phosphoric Acid

Inconel 718 flanges have excellent mechanical properties over a wide temperature range. These Inconel 718 flanges have high creep rupture strength at elevated temperatures up to approximately 700 degrees Celsius (1290 degrees Fahrenheit).

The Nickel Alloy 718 Cold Finished Bar is formed after the hot-rolling process comes to an end.

Inconel 718 is a precipitation hardening nickel-chromium alloy containing large amounts of iron, niobium and molybdenum, and small amounts of aluminum and titanium. 718 material maintains high strength and good ductility at temperatures up to 1300¡ãF (704¡ãC). Compared with other precipitation hardening nickel alloys, this alloy has relatively good weldability, formability and excellent low temperature properties. The alloy’s slow precipitation hardening reaction makes it easy to weld without hardening or cracking. Inconel? Alloy 718 is non-magnetic. It maintains good corrosion and oxidation resistance for applications requiring high creep and stress-rupture resistance at temperatures up to 1300¡ãF (704¡ãC) and oxidation resistance up to 1800¡ãF (982¡ãC) parts.

ASTM B564 UNS N02200 Flange Nickel 200 is a 99.6% pure nickel alloy and one of the toughest metals in existence. It exhibits excellent mechanical properties and high thermal and electrical conductivity. Additionally, Nickel 200¡¯s beneficial properties and its chemical composition make it easily fabricable and highly resistant to corrosive environments

The alloy 601 also has good resistance to aqueous corrosion.

Inconel 601 fasteners are designed to withstand severe corrosion and high temperature exposure. These fasteners contain nickel and chromium alloys for excellent corrosion, heat and oxidation resistance. Nickel content retains ductility and high temperature strength after prolonged use. Fasteners of this grade produce a tightly adherent scale that resists spalling under severe thermal cycling conditions.

Inconel 600 pipe is a chromium-nickel alloy designed for use at temperatures up to 2000 F and down to as low as cryogenic levels. The alloy is resistant to reducing environments as well as chloride stress corrosion cracking due to its nickel content and resistant to weaker oxidizing conditions through its chromium content. Alloy 600 seamless nickel pipe is an austenitic alloy with high nickel content that is non-magnetic and has excellent mechanical properties at both elevated temperatures and cryogenic temperatures. Werkstoff NR 2.4816 Pipes have common applications in gas turbine blades, seals, and combustors, and turbocharger rotors and seals, electric submersible well pump motor shafts, high temperature fasteners, and so on. We are manufacturer, stockiest and exporter of ASTM B829 Inconel 600 Seamless Pipe and we offer these pipes in custom-made sizes and thicknesses, as per the exact demands of our admired clients.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

The flange material has very high tensile strength of 930MPa and minimum yield strength of 517MPa. This strong material also has 1350 degrees Celsius melting point. This makes the flanges be applied in some of the tough and stressful applications.

Inconel 718 bolts provide corrosion resistance in reducing and neutral media, as well as in oxidizing atmospheres, provided that the oxidizing media allows a passive oxide film to form. Inconel 718 bolts have good mechanical properties and excellent resistance to corrosive environments.

INCONEL 718 is a high nickel superalloy commonly used in the oil and gas, petrochemical and gas turbine industries. It has excellent mechanical strength, in addition to high corrosion resistance.

Inconel 601 has good resistance to stress corrosion cracking. Due to the control of carbon content and grain size, 601 has high creep rupture strength, so it is recommended to use 601 in the field above 500 ¡ãC.

Incone1601 alloy is a nickel-chromium-iron based solid solution strengthened alloy, which has good high-temperature corrosion resistance and oxidation resistance, excellent hot and cold processing and welding performance, and has a total resistance below 700 “C.

The alloy 601 also has good resistance to aqueous corrosion.

The versatility of INCONEL 600 alloy allows it to be used in a variety of applications involving temperatures ranging from cryogenic temperatures to over 2000¡ãF (1095¡ãC).

This alloy is widely used in the chemical industry for its strength and corrosion resistance. Applications include heaters, stills, bubble columns, and condensers for fatty acid processing; evaporator tubes, tube sheets, and sheeting trays for the manufacture of sodium sulfide; and equipment for processing abietic acid in pulp production.

Astm B564 Uns N06601 Flanges Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Extraordinary results with the inclusion of nickel in Inconel 718 Hex Nuts. Today, aerospace is becoming the next market for Inconel 718 hex bolts because of its tremendous performance in elevated and low temperatures.

The alloy also resists ammonia bearing atmospheres, as well as nitrogen and carburizing gases.

INCONEL 625 is a high nickel superalloy commonly used in the oil and gas, petrochemical, aerospace and gas turbine industries. In addition to high resistance to pitting and crevice corrosion, it has excellent mechanical strength. Inconel 625 fasteners also have a melting point of 1290 to 1350 degrees Celsius. This enables them to operate at high temperatures. High temperature resistance, corrosion resistance and high strength make UNS N06625 Class 2 fasteners useful in power plant, chemical, medical and food processing industrial applications.

Alloy 625 (UNS N06625) can be used in round bar, flat bar, extruded section, tube, tube, plate, sheet, strip, plate, hexagon, forging, extruded section and wire. View stock listings, sheet stock listings or contact sales for more availability.

nconel 600 Flanges are made up of a material that has carbon, manganese, silicon, sulfur, copper, iron, nickel and chromium. This is a nickel chromium alloy as it contains 72% nickel and 14% chromium minimum

It has high resistance to oxidation at elevated temperatures up to 1050C.

The ASME SB564 Alloy 825 Slip On Flanges connect seamless pipes in precision locations by slipping on to the pipes. These are useful in precision applications like instruments and machineries. The ASTM B564 Incoloy 825 Threaded Flanges are used where welding is not preferred or it is not possible.

Known to be one of the more heat resistant alloys, the Alloy 600 Blind Flange may be used with the intention of closing or shutting off a nozzle or a section of a pipe in a vessel, particularly in elevated temperature settings.

Inconel gaskets, such as Inconel 600, 601, 625, 686, 718 and 725 gaskets, are a family of nickel-chromium-molybdenum alloys for high strength and good corrosion resistance at elevated temperatures. Due to its high thermal stability, Inconel can be used in operating temperatures from cryogenic to 2200¡ãF (982¡ãC). There is almost no corrosion to Inconel gaskets in mild environments such as atmosphere, seawater, neutral salt, and alkaline media. Because the high alloy content of Inconel gaskets enables them to withstand a variety of severe corrosive environments. In more severe corrosive environments, the combination of nickel and chromium provides resistance to oxidizing chemicals, while high nickel and molybdenum contents provide resistance to non-oxidizing environments.

Alloy 600 is a nickel-chromium-iron alloy used in applications requiring corrosion and heat resistance. This alloy has excellent mechanical properties and exhibits an ideal combination of high strength and good machinability over a wide temperature range.