Inconel 625 elbows Pipe elbow fittings available in various shapes and sizes

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel is used in aerospace applications as well as marine applications. Common applications for this alloy are springs, seals, bellows for submerged controls, electrical cable connectors, fasteners, flexure devices, and oceanographic instrument components.

Inconel 600 bars can be enhanced to possess a smooth and aesthetic finish.Inconel 600 can be easily machined and elongated by 30%

Inconel 600 is a nickel-chromium alloy with good oxidation resistance at higher temperatures, with good resistance in carburizing and chloride containing environments.

Inconel 601 is an alloy composed of nickel and chromium.

Controlled chemical composition limits are applied in the nuclear industry to eliminate the risk of stress corrosion cracking by high purity water containing chloride ions.

The addition of these two elements to Alloy 625 bolts eliminates the need for a precipitation hardening treatment because Inconel 625 nuts have a hardening effect. Inconel 625 fasteners provide high strength properties and high temperature resistance.

Inconel 718 is a high strength, corrosion resistant nickel-chromium material that can be used in temperatures from -423¡ã to 1300¡ãF. Inconel 718 age hardening alloy can be easily fabricated, even into complex parts. The welding characteristics of Inconel 718, especially its resistance to post-weld cracking, are excellent.

Inconel 718 or Alloy 718 is the most commonly used hardenable Inconel nickel alloy grade. Due to its precipitation hardening and its main nickel and chromium components, this alloy has excellent corrosion resistance and high strength even at high temperatures.

Inconel 625 alloy is used for heat shields, furnace hardware, gas turbine engine ducting, combustion liners and spray bars, chemical plant hardware and special seawater applications.

Alloy 600, or Inconel 600, is one of the most popular superalloys and is commonly referred to as UNS N06600. Inconel 600 is a non-magnetic nickel-chromium alloy with excellent corrosion resistance and mechanical properties, and good weldability over a wide temperature range.

Its strength as well as its resistance to corrosion and stress make Inconel 625 elbow a suitable component of nuclear reactors, particularly in the control rod and reactor core.

Alloy 725 (UNS N07725) is a nickel-chromium-molybdenum-niobium alloy that is highly corrosion resistant and age hardened to twice the strength of annealed alloy 625. The strength of Alloy 725 is increased by heat treatment rather than cold treatment. This also gives strength to large uneven parts that cannot be strengthened by cold work. Alloy 725 is used for hangers, landing joints and high strength fasteners in marine applications.

Incoloy 825 Flanges are used in harsh environments and applications with high strength and elevated temperatures to connect pipes together. Flanges are fittings that have flat or raised faces to add to the grip of the connection.

Inconel 625 Bolts were developed in the 1960s as a vapor-lined piping material to provide high strength even in extreme high temperatures ranging from freezing low temperatures to 1800¡ãF. Inconel 625 Bolts, also known as Alloy 625, are known for their amazing ability to maintain strength and heat resistance in and out of corrosive environments.

Inconel 601 is an alloy composed of nickel and chromium.

This nickel 2.4816 bolt is inherently non-magnetic. Inconel 600 Nuts and Bolts have excellent mechanical properties, offering buyers an advantageous combination of high strength and good weldability over a wide temperature range. The high nickel content in Inconel 600 screws allows them to maintain considerable resistance under reducing conditions. The nickel content in Alloy 600 bolts makes the fastener resistant to corrosion by a variety of organic and inorganic compounds. For example, Inconel 600 bolts have excellent resistance to chloride stress-related corrosion cracking, while also exhibiting excellent resistance to alkaline solutions.

Extraordinary results with the inclusion of nickel in Inconel 718 Hex Nuts. Today, aerospace is becoming the next market for Inconel 718 hex bolts because of its tremendous performance in elevated and low temperatures.

Inconel 718 can be described as a nickel-chromium alloy containing molybdenum, niobium, iron and very small amounts of titanium and aluminum. Inconel 718 round bars are strong and they also show remarkable yields.

Alloy 625, commonly known as Inconel 625, is a nickel-chromium-molybdenum-niobium alloy (NiCr22Mo9Nb).

The added titanium, with proper heat treatment, stabilizes the susceptibility of Inconel plate flanges to intergranular corrosion. With an unwavering commitment to quality, we offer our customers a wide variety of Inconel Butt Weld Neck Raised Face Flanges.

INCONEL 625 is used in offshore and aerospace industries, but also in pollution control equipment.

There are different types such as socket weld flanges, welded neck flanges, Inconel 601 Slip On Flanges, orifice flanges and so on. The flanges made of this material are strong, corrosion resistant to acids, reducing agents and oxidation and are also harder.

Applications for Inconel 600 Nuts and Bolts can be found in general engineering applications, oil and gas industry applications, aerospace, marine, construction, power generation, and more.

Inconel 718 is a precipitation hardenable nickel-chromium alloy with high creep rupture strength at elevated temperatures around 700oC (1290oF). It is stronger than Inconel X-750 and has better mechanical properties at low temperatures than Nimonic 90 and Inconel X-750.

Inconel 601 fasteners are designed to withstand severe corrosion and high temperature exposure. These fasteners contain nickel and chromium alloys for excellent corrosion, heat and oxidation resistance. Nickel content retains ductility and high temperature strength after prolonged use. Fasteners of this grade produce a tightly adherent scale that resists spalling under severe thermal cycling conditions.

Inconel 625 round bar is one of the more common grades of Inconel round bar available. The Round Bar is AMS 5666 compliant. Inconel 625 can be used in a variety of applications. Inconel 625 has high strength, excellent fabrication and excellent corrosion resistance. The viable temperature range for Inconel 625 starts at cryogenic temperatures up to 1800¡ãF.

Incoloy 825 is a nickel iron chromium alloy with additions of molybdenum, copper and titanium. This nickel steel alloy’s chemical composition is designed to provide exceptional resistance to many corrosive environments

Our 718 Inconel Alloy Flanges are designed in a variety of pressure rating configurations, and these flanges offer excellent features such as robust construction, durability, and high performance.

Inconel bolt fasteners consist of three parts – a head at the top, a long cylinder with external threads, and a chamfer at the bottom.

This nickel steel alloy is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition.