Inconel 625 round head bolt for Aircraft ducting systems

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

In pressurized water reactors it is used for control rod guide tubes and steam generator baffle plates etc. Furnace retort seals, fans and fixtures.

Alloy 600 / Inconel 600 is combination of Nickel Chromium and Iron providing a standard material for the chemical industry and the automotive engine, aero engine and airframe sectors.

Inconel flanges are constructed of high-grade 718 material for optimum heat and corrosion resistance properties. These flanges have excellent dimensional accuracy and excellent surface finish.

Inconel 625 Bolts were developed in the 1960s as a vapor-lined piping material to provide high strength even in extreme high temperatures ranging from freezing low temperatures to 1800¡ãF. Inconel 625 Bolts, also known as Alloy 625, are known for their amazing ability to maintain strength and heat resistance in and out of corrosive environments.

Inconel 601 fasteners can be made into all types of bolts, screws, studs, studs, nuts, washers, dowels and other standardized and custom bolt assemblies.

Inconel UNS N06601 Pipe Flanges Inconel 601 Flanges are made up of a nickel chromium alloy. The material grads range differently with the composition ratio. The 601 grade has 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron in the composition. There are different types such as socket weld flanges, welded neck flanges, Inconel 601 Slip On Flanges, orifice flanges and so on. The flanges made of this material are strong, corrosion resistant to acids, reducing agents and oxidation and are also harder.

HT PIPE maintains a large inventory of Inconel 625? flanges, with a variety of sizes, styles, and configurations available to meet your needs. Our Inconel flanges meet the requirements of numerous national and international specifications, including, but not limited to:
N06625
ASTM B564
ASME SB564
WERKSTOFF Nr 2.4856

High-strength versions of these Inconel 718 butt weld flanges are increasingly found in oilfield applications due to increasingly demanding environments.

ASTM B564 601 Long WN Flange Inconel 601 Flanges are made up of a nickel chromium alloy. The material grads range differently with the composition ratio. The 601 grade has 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron in the composition. There are different types such as socket weld flanges, welded neck flanges, Inconel 601 Slip On Flanges, orifice flanges and so on. The flanges made of this material are strong, corrosion resistant to acids, reducing agents and oxidation and are also harder.

ASTM B637 UNS N07718 is a nickel-chromium-molybdenum alloy designed to eliminate a wide range of severe corrosion conditions, pitting and crevice corrosion. It also exhibits extremely high tensile, yield and creep rupture properties at elevated temperatures. It is suitable for long-term use from low temperatures to 1200¡ãF. One of the defining features of the composition of B637 UNS N07718 is the addition of niobium to allow age hardening, which facilitates welding and annealing without unforced hardening during heating and cooling.

Little or no attack occurs at room and elevated temperatures in dry gases, such as chlorine or hydrogen chloride. At temperatures up to 550C in these media, this alloy has been shown to be one of the most resistant of the common alloys.

Inconel 718 flange for low maintenance. These flanges are easy to install. They contain more strength and the product has a long life. At high temperatures, their durability and flexibility make these flanges ideal.

It has little or no attack occurs at room and elevated temperatures in dry gases, such as chlorine or hydrogen chloride. At temperatures up to 550C in these media, this alloy has been shown to be one of the most resistant of the common alloys.

INCONEL alloy 718 is ideal for use in these circumstances.Inconel 718 can be easily machined and elongated by 30%.

INCONEL 601 Welding Neck Flanges Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Inconel 600 alloy is a nickel chromium stabilized alloy. It has very good oxidation resistance at higher temperatures. In addition, it has excellent resistance to carburizing and chloride containing atmospheres. It is a non magnetic alloy with very good mechanical properties. Inconel 601 is a chromium and nickel based material for applications requiring heat and corrosion resistance. This material stands out for its resistance to high temperature oxidation.

There are different functional types such as the ASME SB564 Alloy 601 Lap Joint Flange, slip on flanges, weld neck flanges, socket weld flanges and orifice flanges. The face type of the flanges vary as flat face, raised face and ring type joint.

Inconel 625 elbow was designed to have better weldability than earlier alloys, with no signs of cracking when exposed to strain and temperature changes post-welding.

Extraordinary results with the inclusion of nickel in Inconel 718 Hex Nuts. Today, aerospace is becoming the next market for Inconel 718 hex bolts because of its tremendous performance in elevated and low temperatures.

ASTM B564 UNS N08825, also known as Incoloy 825, is a high nickel alloy that is used in high corrosion and high temperature applications. It has different designations in different countries: ASTM B424 Gr. UNS N08825(US), DIN 17750 Gr. 2.4858, JIS G4902 Gr. NCF 825.

Nuclear systems also generally involve high temperatures beyond 650¡ãC, in which the strength of Inconel 625 elbow can withstand.

Inconel 718 is a chromium and nickel based alloy with additional amounts of titanium, niobium, iron, molybdenum and aluminum. This alloy has high mechanical strength and durability to withstand extreme environmental conditions. Inconel 718 round bar has excellent resistance and solderability. These bars have excellent overall corrosion resistance in high temperature and high pressure applications.

Inconel 718 elbows are commonly used in gas turbine engine parts, wellhead completions and blowout preventers (BOPs).

Alloy 718 fasteners (UNS N07718 fasteners) are very strong and resistant over a wide temperature range (-423 to 1300F).

Nickel chromium alloy 625 has excellent resistance to pitting and crevice corrosion, high corrosion-fatigue strength, high tensile strength as well as resistance to stress corrosion cracking to chloride ions ¡ª making it an excellent choice for sea-water applications.

Although the welding characteristics of Inconel 718, especially its resistance to post-weld cracking tend to be outstanding. Similar to other Inconel alloy grades, Inconel 718 plate forms a binder on its surface when the material is heated, but self-repairs the passivating oxide layer. The room temperature strength of ASTM B670 Inconel 718 sheet can be significantly increased using a precipitation heat treatment method.

Due to all these properties, they are used in rocket engines, pump bodies, jet engines and nuclear thrust reversers. Inconel 718 flanges allow welding and annealing in heat and cold treatments without spontaneous hardening.

INCONEL Alloy 600 (UNS N06600 W.Nr. 2.4816) is a standard engineering material for applications which require resistance to corrosion and heat.

Inconel 625 Material can be used as propeller blades for motor patrol gunboats, wire rope for mooring cables, submarine auxiliary propulsion motors, sheathing for undersea communication cables, submarine quick disconnect fittings, exhaust ducts for Navy utility boats, submarine transducer controls, and steam-line bellows. We have built and designed our products to meet market demands and requirements. We deliver products that are 100% durable.

It has high resistance to oxidation at elevated temperatures up to 1050C.