inconel 625 stub end pipe fittings

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

Alloy 400 has corrosion resistance, high strength and good weldability. Monel 400 has amazing mechanical properties at sub-zero temperatures. It has a melting point of 2370-2460¡ãF and is easily used at temperatures up to 1000¡ãF.

Stainless Steel 304 Pipe Fittings are made up of 18/8 chromium nickel alloy steels. The SS 304 Elbow has 18% chromium and 8%nickel in its composition. This makes the SS UNS S30400 Buttweld Fitting to be stronger with 215MPa minimum yield strength and 505MPa minimum tensile strength. The combination makes Stainless Steel 304 Buttweld Pipe Fittings corrosion resistant and high temperature capable up to 889 degrees Celsius.

The stability of niobium allows pipe fittings to be used in corrosive environments in the as-welded state. It also hardens best with the help of using working temperature. It also offers significant corrosion resistance with extremely clean fabrication and increased mechanical housing. Stainless steel UNS S31600 fittings meet or exceed unique corporate requirements, including ISO, DIN, ASTM and ASME requirements.

The austenitic structure of 316 stainless steel pipe bend gives excellent toughness, even at cryogenic temperatures.

Monel 400 provide superior quality for different types of mechanical, and general engineering applications.

Our stainless steel 310S butt weld fittings are said to be the most commonly used and easiest to use, offering more forms and finishes than any other grade in the stainless steel range. Since it is the low carbon form of the alloy, these SS 310 butt welded pipe fittings are used to simplify production.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

304 and 304L are austenitic alloys, which means that a nonmagnetic solid solution of ferric carbide or carbon in iron is used in giving this stainless steel its corrosion-resistant properties.

Inconel 600/601/625/718 also protects welded joints against pitting/oxidation, crevice resistance and other properties. Even this product gives you more tensile strength than any other product. The main features of this product are flexibility, robust construction, high durability, and high temperature resistance. Butt welded joints are able to handle temperature and atmospheric pressure. It’s all thanks to the quality of the alloy.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The alloy is slightly magnetic at room temperature. Monel 400 is widely used in the chemical, oil and marine industries.

HASTELLOY(r) B-2 is a wrought nickel-molybdenum alloy that can be used in the ¡®as welded¡¯ condition.

Monel K500 alloy has excellent corrosion resistance, and has higher strength and hardness than Monel 400. This is due to the addition of elements such as Al and Ti to the alloy, and after a certain heat treatment, there are dispersed intermetallic compounds on the substrate.

Hastelloy C-276 pipe fittings refer to factory-made wrought nickel alloy fittings manufactured to ASTM B366 UNS N10276. It can be designated as CRHC276(corrosion resistant fittings) or WPHC276(ASME pressure fittings). The fittings can be manufactured from pipe or tube of ASTM B619, B622, B626 UNS N10276, plate, sheet or strip of ASTM B575 UNS N10276, forging or bar of ASTM B564, B462, B472, B574 Gr. N10276. The Hastelloy C-276 fittings are mainly furnished in 3 connection types: butt welding, threaded, socket welding, covering a variety of standard specifications.
Since Alloy C-276 contains a high amount of nickel in its chemical composition, the metal is very ductile. Therefore forming it into various shaped Hastelloy C276 Pipe Fittings becomes very simple. Yet, this is not the only benefit offered by this alloy. Like many nickel containing alloys, the strength and corrosion resistance properties of this alloy make it one of the most sought after ones by Hastelloy Fittings Suppliers. The metal is capable of exhibiting superior resistance to pitting. Unlike highly ductile materials that tend to exhibit failure against stress corrosion cracking, on the application of a tensile load, the Alloy C276 Pipe Fittings are able to withstand such levels of stress.

Alloy 20 was originally developed for use in sulfuric acid service found in facilities such as pulp and paper mills. With good general corrosion properties, Alloy 20 usage has expanded in chemical, petrochemical and power generation plants.

From the perspective of composition, the high nickel content of INCONEL 600 alloy makes the alloy resistant to corrosion of many organic and inorganic compounds, and makes it almost immune to chloride ion stress corrosion cracking; chromium imparts resistance to sulfur compounds, and in Provides anti-oxidation conditions in high temperature or corrosive solutions.

AL-6XNalloy (UNS N08367) is a low carbon, high purity, nitrogen-bearing “super-austenitic” stainless alloy. The AL-6XN alloy was designed to be a seawater resistant material and has since been demonstrated to be resistant to a broad range of very corrosive environments. The high strength and corrosion resistance of the AL6XN alloy make it a better choice than the conventional duplex stainless steels and a cost effective alternative to more expensive nickel-base alloys where excellent formability, weldability, strength and corrosion resistance are essential.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Hastelloy B2 pipe bend is a nickel-molybdenum alloy particularly suited for equipment handling reducing chemical environments.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

It exhibits exceptional corrosion resistance in chemical environments containing phosphoric acid, nitric acid, chlorides and sulfuric acid. It also has good mechanical properties at both ambient and elevated temperatures.

The UNS S32760 Pipe Fittings have high tensile strength, durability, and excellent corrosion resistive property. The specifications of SA 815 WPS S32760 Elbow has criteria like size, standard, type and many more.

Duplex stainless steels are Fe-Ni-Cr alloys consisting of ferritic-austenitic microstructure at room temperature. These steels generally possess beneficial combinations of the austenitic and ferritic phases. Duplex stainless steels exhibit greater toughness and better weldability than ferritic stainless steel (Nilsson, 1992). They have higher strength and better corrosion resistance than austenitic stainless steel (Atamert and King, 1992). Their good engineering performance has led to an increasing number of applications, mainly in corrosive environments such as sour gas pipelines and chemical reaction vessels.
Duplex stainless steels combine characteristics of the austenitic and ferritic family of alloys to offer benefits from both with fewer downsides — often at a lower cost than other steel alloys.
Duplex stainless steels have a combination of two phases, ferrite and austenite in approximately equal measure. This allows them to benefit from the advantages of both austenitic and ferritic stainless steels, leading to increased strength, improved weldability, higher toughness and resistance to several types of corrosion.

Stainless Steel 316H Stub End Pipe Fittings are equivalent to those of the parent metal, matching or slightly over-alloyed fillers should preferably be used.

The manufacturing processes for pipe fittings includes forging and shaping operations. As well as pressing, hammering, piercing, extruding, upsetting, rolling, bending, fusion welding and machining. Or the processes of combination of two or more of these operations.

It is a tee fitting with two outlets at a 90¡ã junction to the main line.

Hastelloy B3 pipe fittings is a Nickel, Molybdenum, and Chromium alloy which has excellent resistance to pitting, corrosion, stress-corrosion cracking plus and thermal stability superior. Alloy B3 exhibits excellent resistance to sulfuric, acetic, formic and phosphoric acids, and other non-oxidizing media.

The alloy matrix is strengthened by the interaction of niobium with molybdenum that offers high strength without the need for precipitation-hardening treatment.

The Stainless Steel 304 Pipe Fittings are also strong. They have 205MPa minimum yield strength and 515MPa minimum tensile strength.