Inconel 625 UNS N06625 2.4856 spring washer DIN127

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 718 is a molybdenum, chromium and nickel based alloy developed to resist a wide range of severely corrosive atmospheres, crevice corrosion and pitting corrosion.

The manufacture of Inconel 600 Sheet & Plate is done in the industry using high quality alloys collected from reliable suppliers.

This alloy is approximately 2 times stronger than Inconel 625, has excellent creep rupture strength at temperatures up to 1300¡ãF (700¡ãC), and can be used at temperatures up to 1800¡ãF (982¡ãC).

ASME SB564 Alloy 601 weld neck flanges Inconel 601 Flanges are made up of a nickel chromium alloy. The material grads range differently with the composition ratio. The 601 grade has 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron in the composition. There are different types such as socket weld flanges, welded neck flanges, Inconel 601 Slip On Flanges, orifice flanges and so on. The flanges made of this material are strong, corrosion resistant to acids, reducing agents and oxidation and are also harder.

During natural gas processing, several common contaminants, such as water, carbon dioxide, and hydrogen sulfide, come into contact with equipment components, including alloy 600 studs. These contaminants are highly corrosive in nature. Therefore, it makes sense to use Din 2.4816 forgings in the equipment. This is because Inconel 600 threaded rods offer several advantages.

High solution anneal, a treatment at 2000/2200oF (1095/1205oC) for a time depending upon section size, but soaking for a maximum of one hour, and cooling in air or a faster medium.

Inconel 601 (UNS N06601 ) nickel-based alloy density: 8.42 g/cm3 (grams/cubic centimeter).

Inconel 600 Bolts are composed of Chromium, Nickel and Molybdenum. This makes these bolts superior to stainless and carbon steel bolts. The lengths of these bolts are between 3mm and 200mm. Inconel 600 Hex Bolts are highly resistant to corrosion and oxidation. These bolts are designed to handle extreme temperatures and high pressures.

Inconel 718 is a precipitation hardening nickel-chromium based superalloy. ASTM B637 UNS N07718 round bars also contain significant amounts of elements such as iron, niobium and molybdenum, and trace amounts of metals such as aluminum and titanium. Aluminum and titanium make Inconel 718 hardenable.

Inconel 718 is a nickel-based precipitation hardening alloy designed for very high yield strength, tensile strength and creep rupture properties at temperatures up to 1300ºF (705ºC). This alloy has excellent solderability.

UNS NO 6601 WN Flangs Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Inconel 600 alloy is specially made to use high-temperature application and it can be bear up to 2000 degree F temperature. The high nickel content increases its specific quality like improve resistance in reducing the environment, resistance to corrosion by many inorganic and organic elements. Because of nickel alloy the Inconel 600 alloy resistance to chloride stress corrosion and also resistance to many acids.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Inconel 600 Flanges are made up of a type of nickel chromium alloy. There are different grades of nickel chromium alloys each differ with the chemical compositions.

Inconel 625 was developed in the 1960s to create a material that could be used in steam pipes. Some modifications have been made to its original composition to make it more creep resistant and weldable.

Fundamentally, the Inconel 625 Flanges are considered to be the perfect match for applications that involve nuclear and marine industries.

Alloy 625 has proven to be a highly regarded building material due to its ability to solve a variety of design and application problems.

Strength can be measured using tensile strength, corrosion resistance and even melting resistance. Inconel 625 bar has a tensile strength range of 103-160 Ksi, higher than stainless steel’s 73.2 Ksi, and can withstand higher temperatures. Inconel 625 bar is a super alloy because of their corrosion resistance and suitability for high pressure and high temperature applications.

HT PIPE maintains a large inventory of Inconel 625? flanges, with a variety of sizes, styles, and configurations available to meet your needs. Our Inconel flanges meet the requirements of numerous national and international specifications, including, but not limited to:
N06625
ASTM B564
ASME SB564
WERKSTOFF Nr 2.4856

Inconel 718 plate suppliers point out that, in addition to relatively good weldability, this alloy has good formability and excellent low temperature properties compared to other precipitation hardening nickel-based alloys.

In pressurized water reactors it is used for control rod guide tubes and steam generator baffle plates etc. Furnace retort seals, fans and fixtures.

Inconel 625 bolts have a high density of 8.44 grams per cubic centimeter. The material also has high strength values. The minimum tensile strength of the fastener is 880MPa and its minimum yield strength is 460MPa. Inconel 625 nuts have 50% elongation and good electrical resistivity.

The optimum conditions for Alloy 601 seamless pipe depend on the type of application and the service temperatures involved. Generally, Alloy 601 pipe in solution treated condition is used in fracture-limited applications, where temperatures can be as high as about 1000¡ãF and still may rise.

Pipelines for gathering sour gas have been built with solid (or clad) INCONEL? 625 alloy and used in seawater heat exchangers in refineries, power plants, and offshore topside services that often need this material.

Inconel 625 Material can be used as propeller blades for motor patrol gunboats, wire rope for mooring cables, submarine auxiliary propulsion motors, sheathing for undersea communication cables, submarine quick disconnect fittings, exhaust ducts for Navy utility boats, submarine transducer controls, and steam-line bellows. We have built and designed our products to meet market demands and requirements. We deliver products that are 100% durable.

In addition to basic alloys, our flanges are available in titanium, aluminum, cobalt, boron, copper, iron and other metals. Inconel 718 flanges offer uncompromising protection against oxidation and corrosion factors.

Inconel 718 Bolts exhibit extremely high yield, tensile and creep rupture properties at temperatures up to 1300¡ãF.

Because Inconel 718 alloy maintains good corrosion resistance and excellent oxidation resistance, SB670 Inconel 718 strip can be used in parts requiring high creep and stress rupture resistance up to 1300¡ãF and oxidation resistance up to 1800¡ãF temperature range.

UNS N08031 Nut is a nitrogen-added iron-nickel-chromium-molybdenum alloy. Also known as WNR 1.4562 Nuts, its pitting resistance in high chloride environments is between super-austenitic stainless steels and nickel alloys. The alloy has very good corrosion resistance in mixed acid and high chloride environments. Typical applications for these nuts are control lines, heat exchangers, control and instrumentation pipes, etc. Industries that primarily use this grade are chemical processing, oil and gas, etc.

Inconel 718 Alloy Fasteners are available in a variety of styles including Inconel 718 Eye Bolts, Inconel 718 Wing Bolts, Inconel 718 U Bolts, Inconel 718 Flat Head Screws, Inconel 718 Machine Screws, Inconel 718 Hex Screws, Inconel 718 Hex Socket Screws, inconel 718 hex nuts and inconel 718 lock nuts, etc.

Alloy 718 is a nickel-chromium alloy that is easy to manufacture and has excellent welding characteristics, especially where resistance to post-weld cracking is required.

Inconel 718 bolts provide corrosion resistance in reducing and neutral media, as well as in oxidizing atmospheres, provided that the oxidizing media allows a passive oxide film to form. Inconel 718 bolts have good mechanical properties and excellent resistance to corrosive environments.