inconel alloy 625 tubing N06625 2.4856

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Alloy 625 is generally supplied in the annealed condition, to provide utmost stability during fabrication and subsequent service. INCONEL 625 alloy has found to have a resistance to potable and salt or brackish water, where Chloride ions cause pitting and crevice corrosion to become established. As a result, pipelines for gathering sour gas have been built with solid (or clad) INCONEL 625 alloy and used in seawater heat exchangers in refineries, power plants, and offshore topside services that often need this material.

Inconel 625 is an alloy that also performs well at lower temperatures. Temperature changes can cause the alloy tube to expand or contract. Therefore, materials with good ductility, such as Inconel 625 pipe, should be selected for piping systems with temperature fluctuations, especially because of their good properties.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

High-nickel alloy pipes are made of nickel as the main element combined with another material. It combines two materials to provide more desirable properties, such as high strength or corrosion resistance. Compared with other stainless steel or iron-based alloys, brushed nickel tube casing has a higher ability to accept alloying elements in solid solution.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.41

Buy High Temperature Inconel Tube for High strength and toughness. Our company has Inconel Tubing in ready stock, available in various wall thicknesses and different diameters, 3″ Pipe Inconel and others of the likes of Inconel Heat-resistant capillary Tubes and many more like Inconel Coil Tubing and so much more.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Hastelloy C-276 can be forged, hot upset and impact extruded. Although the alloy tends to work harden, it can be successfully deep drawn, spun, press formed or stamped. All common welding methods can be used to weld Alloy C-276, but oxyacetylene and submerged arc processes are not recommended when the manufactured item is intended for corrosion service. Special precautions should be taken to avoid excessive heat input.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.49

Alloy B2 Tubes, which has poor corrosion resistance to oxidizing environments. Hastelloy B2 Seamless Tubes is a solid solution strengthened, nickel ¨C molybdenum alloy, with significant resistance to reducing environments like hydrogen chloride gas, and sulphuric, acetic and phosphoric acids. Molybdenum in Hastelloy B2 Welded Tubes is the primary alloying element which provides significant corrosion resistance to reducing environments.

Technically, Inconel alloy ERW Pipes are resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at both normal temperature and elevated temperatures. Inconel Pipes has good oxidation resistance in intermittent service to 870 Degree C and in continuous service to 925 Degree C.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Hastelloy C22/C276 pipes and tubes are manufactured by mechanical treatment or electroplating and machining. The inner and outer surfaces of the Hastelloy tubing are electropolished for a uniform appearance.

According to specification ASTM B407, these pipes are annealed for 15 minutes at a temperature of 1800¡ãF. After annealing, the Inconel alloy tubes is cooled in air. The alloy has superior resistance to Carburization.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Alloy C-276 is one of the most common corrosion resistant alloys available today. It is used in a variety of environments from moderately oxidizing to strongly reducing conditions. Alloy C-276 has excellent resistance to sulfuric acid, hydrochloric acid, formic acid, acetic acid, chlorides, solvents, wet chloride gas, hypochlorite and chlorine solutions.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.30

Inconel 600 pipe is a chromium-nickel alloy designed for use at temperatures up to 2000¡ãF and down to as low as cryogenic levels.

Features of the inconel 600 pipes are as follows- it has good resistance towards corrosion, it is immune to chloride stress and corrosion cracking.

Super alloys are also referred to as high performance alloys. They have good creep and oxidation resistance, and are utilized where high surface stability is required. They also have an ability to function under high temperatures and mechanical stress. They can be strengthened by solid-solution hardening, work hardening, and precipitation hardening. They are divided into three groups such as iron-based, nickel-based, and cobalt-based alloys.

Hastelloy B2 resists the formation of grain boundary carbide precipitates in the weld heat-affected zone, making it suitable for most chemical process applications in the as-welded condition. The heat-affected weld zones have reduced precipitation of carbides and other phases to ensure uniform corrosion resistance.
Alloy B2 also has excellent resistance to pitting and stress corrosion cracking.Steel pipes can be disintegrated on the basis of its application.Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes ,tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

Inconel Polished Pipe is typically used in applications where they are exposed to high temperatures. In the presence of high temperature, a thick, stable passivating oxide layer is formed when Inconel Steel Pipe is heated.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

In most instances, the grain size and carbon content of the Inconel Steel 600 Tube can meet clients¡¯ requirements. These Inconel Steel 600 Tube is often used at cryogenic temperatures.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

La tuberia sin costura ASTM B167 inconel 600 es menos resistente a las soluciones oxidantes fuertes, como el acido nitrico concentrado calentado.

Alloy C276 Seamless Nickel Tube is a nickel molybdenum chromium alloy with added tungsten for excellent corrosion resistance in a wide range of harsh environments. The high molybdenum content makes this alloy particularly resistant to pitting and crevice corrosion.

Inconel 600 es una aleacion de niquel-cromo utilizada en aplicaciones que requieren resistencia a la corrosion y a altas temperaturas. Esta aleacion de niquel esta dise?ada para usarse en temperaturas altas que van desde temperaturas bajas hasta 2000 ¡ãF. No es magnetico, tiene excelentes propiedades mecanicas y exhibe la combinacion ideal de alta resistencia y buena soldabilidad en un amplio rango de temperatura.

Nickel 201 is pure commercial nickel with very low carbon content and has been approved for service in high temperature environments up to 1230¡ãC.

As an alloy, since Hastelloy has outstanding corrosion resistance properties to highly oxidizing and reducing agents, Hastelloy tube suppliers recommend this alloy to clients all across the world as the material for Hastelloy Seamless Tubes serves as a great choice for moderate to severe corrosive environment settings. Hastelloy Heat Exchanger Tube is commonly used in applications for pipes and valves in the chemical processing as well as petrochemical industries. Hastelloy Welded tubing is also used in nuclear reactors and chemical reactors. Further, Hastelloy Round Tube is also known to demonstrate excellent use for pressure vessels and heat exchangers.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

The main feature of nickel-based alloys is their excellent strength across a wide temperature range combined with good corrosion resistance. In this sub-group, the material standards also define the allowed hardness range, and hardness is a significant factor affecting the machinability (besides the chemical composition).
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

UNS N07718 Inconel Long Radius Elbows are 1.5 times larger than the nominal diameter of the pipe and withstand high pressure and heat. Industries such as cement and sugar use Inconel elbows for better and uniform product flow. Premium Inconel ASTM B366 UNS N06625 Seamless Bends, Bend Radius Range R=3D-10D, Bend Angles From 10 Degrees To 180 Degrees, Available From Stock.

Nickel steel pipe suppliers shall not add or use any filler metals in welding operations to pipe. Nickel thick wall pipe must also be cold worked as specified in ASTM B725.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.46

Hastelloy B3 pipe is significantly resistant to corrosion resistance at reducing atmosphere. Hastelloy B2 pipes are having excellent resistance to non-oxidizing acid and sulphuric acid.

Because nickel alloys are highly ductile, they can be processed very efficiently into pipes and tubes while maintaining strength. This makes them ideal for use in heat exchangers in chemical processing, for example, which rely on pipes that can withstand high temperatures and corrosive environments. Nickel-based tubing is also used in steam generators, aircraft systems, and oil and gas extraction.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.29

These Inconel Seamless Pipes are also being offered in different sizes and shapes to our customers, where our entire product range is used in varied industrial sectors. Generally, the corrosion resistance of Inconel Welded Pipes is very good in reducing environments, but poor in oxidizing conditions.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Alloy C-276 is a solid solution strengthened nickel molybdenum chromium alloy with a small amount of tungsten. Alloy C-276 exhibits excellent corrosion resistance in a variety of harsh environments and media.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.26

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.