Inconel Pipe

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

The most versatile of the INCONEL product range, INCONEL alloy tubes are used widely, thanks to its high strength, excellent fabricability and outstanding corrosion resistance.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Incoloy 800/800H/800HT grade alloys have a variety of special properties and characteristics that make pipes and tubes even more demanding. As a manufacturer and supplier of such products, we ensure that all our products are manufactured according to the needs and requirements of our customers. Therefore, we use high-quality raw materials that are well tested and used according to international quality standards. With it, modern technology and the latest tools can be used to create pipes and tubes of precise size and length.

With good mechanical strength at elevated temperatures, alloy 625 is known as a high temperature alloy. Inconel alloys have nickel as their base element, which improves the performance of Inconel 625 Seamless Pipe at elevated temperatures.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Nickel alloy pipes and tubes have excellent mechanical properties, low gas content, low vapor pressure, magnetic properties, and high thermal and electrical conductivity. These properties and their chemical composition make nickel highly resistant to corrosive environments. Nickel can be used in any environment below 600o F. It is highly resistant to corrosion by neutral and alkaline salt solutions. Nickel also has low corrosion rates in neutral and distilled water. Metal can be hot formed into any shape or cold formed by all methods.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.65

These Seamless Pipes is nickel-base, where chromium imparts resistance to high temperature corrosion. The ease and economy with which the Welded Pipes can be fabricated, combined with good tensile, fatigue, creep, and rupture strength, it have resulted in its use in a wide range of applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

This nickel alloy has excellent resistance to hydrochloric acid at all concentrations and temperatures.

Monel 400 is also often used for the high tolerance tubing. It exhibits excellent weldability, and it is often found in marine applications such as seawater valves and pump shafts. These tubes are also used in chemical plant equipment, boiler feeders, and heat exchangers. For applications that require a high melting point and toughness under the harshest conditions.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Nickel 201 Pipes that are low Carbon variation of Nickel 200, and with a low Carbon, content reduces the likelihood of intergranular erosion, for the most part, caused because of carbide precipitation amid pipe welding. Transportation of Phenol is generally helped through UNS N02201 Nickel 201 EFW Pipes. We supply Nickel DIN 2.4068 Tubes to the development and design industry, these funnels have a strong basic tough and go about as supporting edges, other than being impervious to soluble salt arrangements.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Compared to stainless steel, this material has a lower yield strength of 148MPa minimum and 462MPa minimum tensile strength. Nickel 200 ERW pipe is also dense as it contains 99% nickel as well as carbon manganese, silicon, iron, sulfur and copper. The density is 8.9 grams per cubic centimeter.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.60

Incoloy 800H has a restricted carbon content range of 0.05 to 0.10%, which is in the upper portion of that of Incoloy 800, and is annealed at 1149 to 1177oC (Incoloy 800 is annealed at 983 to 1038oC). These differences impart it to have higher stress rupture and creep properties than Incoloy 800.

astelloy C276 Pipe is one of the grades available in Hastelloy material. The Hastelloy material is a superalloy made up of chromium, nickel and molybdenum. What makes the Hastelloy stand out is the addition of tungsten. This composition gives the Alloy C276 Seamless Pipe a versatile corrosion resistant property. The material is very much resistant to most chemicals and corrosive environments. The anticorrosive and anti-oxidation nature comes from the chromium and molybdenum components. The strength and precipitation resistance properties of the ASTM B619 N10276 Hastelloy Pipe come from the nickel and the tungsten components of the material. The pipe could be produced cold drawn or hot rolled. The cold drawn ones are seamless. The Hastelloy C276 Seamless Pipe has a high precision in dimensions. This factor is used in fitting the pipes into precise applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Nickel alloy seamless tubes are produced with the help of billets to form hollow shells. These pipes have exceptional strength and no welding or seams are required to connect them.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.51

Pure Nickel Hot Worked Tubes are designed for excellent dimensional accuracy and superior performance. These pipes are very reliable and are available in single random, double random and custom sizes. Brushed Nickel Pipe Sleeves are an easy way to increase the length of pipe in a piping system. These sleeves act as an insulating material that protects pipes in various systems.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.55

The high molybdenum content, as noted by inconel 625 pipe suppliers in mumbai also makes this alloy grade very resistant to local corrosion like pitting and crevice corrosion. The addition of niobium in the Nickel Alloy N06625 Welded Pipe acts as a stabilizing element in the alloy against sensitization, which can occur during welding. Thus, adding niobium in the alloy, according to the alloy 625 pipe suppliers aids in the prevention of subsequent intergranular cracking.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Monel 400 has excellent corrosion resistance in hydrofluoric acid and fluorine gas medium.

Alloy 625 nickel pipe is made from a nickel-chromium-molybdenum alloy with an addition of niobium. High strength and toughness from cryogenic temperatures to 1800 F. Good oxidation resistance, exceptional fatigue strength, and good resistance to many corrosives. Typical applications include chemical processing, aerospace and marine engineering, pollution control equipment, and nuclear reactors.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Nickel alloy 825 seamless pipe is particularly resistant to sulfuric and phosphoric acid. Known as WNR 2.4858 seamless pipe, this nickel steel alloy is used in chemical processing, pollution control equipment, oil and gas well piping, nuclear fuel reprocessing, acid production and pickling equipment.

Nickel 201 is a low carbon grade with low annealed hardness and a very low rate of work hardening, suitable for cold forming operations.

These Inconel alloy tubes offered by us can be availed in various lengths, thickness, finishes and dimensions. As per the requirements of the customers, the best quality of alloy tubes are offered now.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Hastelloy C-276 can be forged, hot upset and impact extruded. Although the alloy tends to work harden, it can be successfully deep drawn, spun, press formed or stamped. All common welding methods can be used to weld Alloy C-276, but oxyacetylene and submerged arc processes are not recommended when the manufactured item is intended for corrosion service. Special precautions should be taken to avoid excessive heat input.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.49

Commercially pure nickel tubes, such as those made from Nickel Alloy 200, contain at least 99% nickel and are suitable for use where maintaining product purity is important, such as in the food production industry. They also have good thermal, electrical and magnetostrictive properties.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.32

Available in various forms, the material is known to be very versatile. The basic chemical makeup of a Hastelloy C276 seamless Pipe includes Nickel, chromium, and molybdenum in its alloy. The trio elements in this wrought alloy are what gives the Hastelloy C276 welded Pipe its high mechanical properties in addition to its excellent corrosion resistance properties.

That’s why our customers prefer to work with nickel alloy tubes. In addition, nickel alloy tubes have good thermal, electrical and magnetostrictive properties. The relatively high thermal conductivity of this grade of nickel tubing results in its frequent use as part of heat exchangers.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.27

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

It is used in high stress applications at elevated temperatures. The Inconel 625 Tube can be used in heat exchangers, condensers and in boiler components for this reason.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

The Inconel 3″ Tube has a small palladium addition to improve corrosion resistance, particularly in mineral acids and strong brines. These Inconel Tubes is a high carbon modification developed for enhanced creep resistance.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Inconel has a high tolerance towards extreme heat and can keep its tensile strength at high temperatures without any change. However, this material is expensive. In addition to tolerating extreme heat, these alloys are oxidation-corrosion resistant.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Hastelloy B2 EFW Pipes is highly resistant to all concentrations and temperatures of hydrochloric acid.