inconel tube 600 601 625 718

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Nickel 201, LC Nickel 99.2; Alloy 201
Commercially pure (99.6%) wrought nickel is essentially the same as Nickel 200, but has a lower carbon content to prevent intergranular carbon embrittlement at temperatures above 600¡ãF (315¡ãC). The lower carbon content also reduces hardness, making Nickel 201 particularly suitable for cold-formed products.

As one of the most versatile and productive metals, nickel readily forms alloys with various elements. Typically, elements such as chromium, molybdenum, copper, and tungsten are used to manufacture high-alloy nickel alloy seamless pipes. A desirable property of commercially pure nickel is the metal’s ability to withstand high temperature settings. Therefore, in those applications that require higher mechanical properties at high temperatures, pure nickel thermal finished tubes are an ideal alternative.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.25

Incoloy Alloy 601 Tubing can use in carburizing equipment, heating-element sheathing, process piping, heat exchangers, nuclear steam-generator tubing, and Incoloy Alloy 601 Tubing can be used in heat-treating equipment, chemical and petrochemical processing, power plants, industrial furnaces as well.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Inconel 600 is a nonmagnetic, nickel-based high temperature alloy possessing an excellent combination of high strength, hot and cold workability, and resistance to ordinary form of corrosion. Inconel 600 also displays good heat resistance and freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range. in Inconel 600 material is mostly required in form of Inconel Pipe, Inconel 600 Plate, Inconel 600 Pipes, Inconel 600 Tubes, Inconel 600 Pipe fittings, Inconel 600 Flange
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

The Inconel 600 Seamless Pipes have many features like good workability, durability, readily weldable, high strength and mechanical property as well. There are various types of Inconel 600 pipes are available such as welded, seamless, square, rectangular, thick wall, thin wall, electro polished, etc.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

This passivation process also results in Inconel being able to retain its strength over a very wide range of temperatures. Other metals, such as aluminium, may not be able to withstand.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Alloy 625 is a nickel-chromium alloy used for its high strength, excellent fabricability and outstanding corrosion resistance. Service temperatures can range from cryogenic to 980¡ãC (1800¡ãF). Alloy 625 strength is derived from the solid solution strengthening effect of molybdenium and niobium on its nickel-chromium matrix.

Inconel Pipe superalloy is also known to have excellent mechanical properties, which is why, the Inconel alloy Pipe is frequently used in industries such as the chemical and aerospace.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Generally, the corrosion resistance of ASTM B444 Inconel Welded Pipes are very good in reducing environments, but poor in oxidizing conditions. Inconel Pipes does not work good in oxidizing acids, such as nitric acid and nitrous.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Nickel 200 seamless tube is a solid solution strengthened, commercially pure wrought alloy. One of the more recommended alloy grades, the Alloy 200 Welded tubing has excellent mechanical properties such as high tensile strength, good toughness and ductility.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Applications for hastelloy c276 include stack liners, pipes, dampers, scrubbers, stack gas reheaters, heat exchangers, reaction vessels, evaporators, transfer piping and many other highly corrosive applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.29

A benefit of using Incoloy 800 is its stability at elevated temperatures. This nickel-iron-chromium alloy can maintain its austenitic microstructure despite the Incoloy 800 Pipe being exposed to elevated temperatures. According to specification ASTM B407, these pipes are annealed for 15 minutes at a temperature of 1800¡ãF. After annealing, the Alloy 800 Seamless Pipe is cooled in air.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Hastelloy C-276 is a grade of Hastelloy, a nickel-molybdenum alloy. There are many different grades of Hastelloy, including the C-276. Hastelloy grades are optimized for specific applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.41

INCONEL alloy tubes are used in roller hearth ovens where they are exposed to blasts of very high temperatures, as well as the corrosive glazes applied to tiles. It¡¯s also used for oxygen injection tubes in metal and glass making, as well as condenser tubes of Inconel alloy in sour-water conditions.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Hastelloy C-22 can be used in conjunction with Hastelloy C-276 to prevent joint corrosion. Its composition is nickel-chromium-molybdenum-tungsten, giving it some of the resistance that is characteristic of C-276. The metal is excellent against overall and localized corrosion, along with chemical, oxidation, and reducing environments. Tests in environments containing wet chlorine and nitric acid have also proved that Hastelloy C-22 shows exceptional resistance. However, one unique characteristic is its weldability, which allows the metal to be used as a filler in many cases where other metals have failed to stop corrosion. These characteristics make Hastelloy C-22 commonly applied in chemical productions for food and beverages and pharmaceutical tools.

Properties of the Hastelloy family include high resistance to uniform erosion, excellent localized corrosion resistance, excellent stress crack resistance, and ease of welding and fabrication. There are ten different alloys in the Hastelloy family, each with its own unique properties that make it a material of construction for many different manufacturing processes.

INCONEL pipes and tubes retain all of the key characteristics associated with these nickel alloys. This includes industry-leading corrosion resistance, good strength and excellent high-temperature performance.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Incoloy 909 Tube has a higher ferrous content and a lower overall cost of ownership. We offer quick responses to customer inquiries and specialize in the rapid delivery of both large and small quantities of Incoloy 909 Tube.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Inconel Alloy 625 is an austenitic nickelchromium-molybdenum-niobium alloy possessing a rare combination of outstanding corrosion resistance coupled with high strength from cryogenic temperatures to 1800¡ãF(982¡ãC).
The strength of Inconel Alloy 625 is derived from the solid-solution hardening of the nickel-chromium

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Los tubos de caldera de aleacion C276 estan disponibles en tama?os ATSM 622/ 619/ 775/ 516/ 626. La tuberia sin soldadura Hastelloy C276 funciona bien incluso en agua salada corrosiva. Los fabricantes de tuberias Hastelloy recomiendan la tuberia soldada Hastelloy Astm B626 C276 por su resistencia a los compuestos de cloro.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Incoloy 800H/HT alloy is used for high temperature structural applications. The nickel content makes the alloy highly resistant to chloride stress corrosion cracking and embrittlement from sigma-phase precipitation. Overall corrosion resistance is excellent. Alloys 800H and 800HT have excellent creep and stress rupture properties under solution annealed conditions.

La tuberia soldada de aleacion 20 se puede formar mediante trabajo en caliente o trabajo en frio. El material forjado en caliente debe calentarse en el rango de temperatura de 2100 grados Fahrenheit a 2250 grados Fahrenheit. La tuberia de aleacion 20 debe enfriarse con agua. Se pueden obtener efectos negativos en la estabilidad del tubo Incoloy Alloy 20 calentando por debajo de 2100 grados Fahrenheit. Tambien es importante aliviar la tension del tubo para que sea facil de usar. La tuberia Carpenter 20 se usa ampliamente en las industrias de procesamiento quimico y refinacion petroquimica, procesamiento de alimentos y farmaceutica.

In C276, molybdenum makes Hastelloy harder and stronger at high temperatures. The properties of this alloying element and its incorporation into the material also make it ideal for welding applications. These nickel alloys are easy to manufacture and form. They also exhibit good ductility and are capable of cold working.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.42

Inconel WERKSTOFF NR. 2.4851 Pipe has attractive properties such as its high mechanical strength and the ability of ASTM B167 Inconel 601 Seamless Pipe to be easily formed, machined and welded.

The most versatile of the INCONEL product range, INCONEL alloy tubes are used widely, thanks to its high strength, excellent fabricability and outstanding corrosion resistance.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

These Inconel alloy Pipes develops a tightly adherent oxide film that protects its surface against corrosion processes. The alloy Pipes has excellent high temperature strength and oxidation resistance to 2200 Degree F. These tubes has higher mechanical properties at elevated temperatures.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Los tubos y tuberias de aleacion 20 tienen muchas buenas propiedades y, por lo tanto, se recomiendan para aplicaciones industriales tipicas. Sus propiedades tienen buena resistencia a la corrosion al acido sulfurico. Resiste el agrietamiento por corrosion bajo tension de acido sulfurico caliente y cloruro. Ademas, tiene muy buenas propiedades mecanicas y procesabilidad.