Low temp carbon steel reducer eccentric reducer SA420 WPL3-WPL6

The carbon steel seamless pipe fittings, buttwelded fitting and fabricated ones are available in the market.

Our extensive technical experience and organized production procedures make us one of the most trusted suppliers of carbon steel fittings and flanges for large shipyards, manufacturing companies, chemical plants, oil refineries, machinery manufacturers, textile and fluid transport companies, etc. one.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

UNS S31803 pipe fittings is a duplex grade with a ferritic-austenitic microstructure. The alloy consists of around 40-50% ferrite in the annealed condition. The duplex microstructure has the high strength of the ferritic grades whilst retaining the corrosion resistance of the austenitic grades.

Inconel 625 is a non-magnetic nickel-based alloy. Known for its high strength and toughness, high corrosion and oxidation resistance, and excellent fatigue strength, Inconel 625? also offers a very wide operating temperature range, from cryogenics to 2,000¡ãF (1,093¡ãC).

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The ASME SA 234 Gr WPB Pipe Elbow and other fittings can come in different dimensions according to the ASME/ ANSI B16.9 and B16.28 standards.Common use material are ASTM A234 Grade WPB, WPC, WP5, WP9, WP11, WP22 and WP91. It covers the butt-welded pipe fittings of Elbow, Tee, Reducer, Cap and Cross, and some socket welding, threaded pipe fittings.

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

INCONEL (nickel-chromium-iron) alloy 600 is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability.

Monel 400 is widely used in Brine heaters, sea water scrubbers in tanker inert gas systems.

Monel K500 pipe bend and elbow are exceptionally good dimensional stability.

We are a manufacturer of stainless steel 304 butt welded pipe fittings, offering a variety of constructions, styles, details, evaluations and sizes, each fitting to meet industry needs. The stiffness of 75 ksi ensures unparalleled finesse, with a high enough stack load limit to work at a stable weight.

The UNS S32750 standard of Pipe Fittings consists of 25% chromium, 4% molybdenum, and 7% nickel. The UNS S32750 Pipe Fittings have a 50-50 microstructure of ferritic and austenitic steel grades with improved strength.

Oil and gas exploration and offshore drilling platforms rely heavily on the use of duplex steel forged fittings as this alloy facilitates smoother operating procedures in the industry.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

To avoid possible stress relaxation grain boundary cracking of N08811 in applications above 1000¡ãF the welded fabrication may be heated 1650¡ãF for about one hour per inch of thickness or 30 minutes minimum then air cooled.

For high temperature applications, the high carbon variant 316H stainless steel and the stabilized grade 316Ti stainless steel should be used.

N04400 is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Alloy N04400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acid-like substances), brine, hydrofluoric acid, and sulfuric acid. Other advantages of using this alloy are toughness and high strength over a wide temperature range; it can also be manipulated to be magnetic if desired.

According to ASME Boiler and Pressure Vessel Code, ASTM A420 WPL6 is not permitted for use in the construction of power boiler.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Stainless Grade 347 | UNS# S34700 is a stabilized austenitic stainless steel very similar to Grade/Alloy 304, containing niobium and tantalum. To avoid chromium carbide precipitation, columbium is used for stabilization.

Nickel alloy long radius elbows Nickel alloy long radius elbows without drilling holes are called long radius elbows and are used to close the end of the pipe. Long radius elbows are available in threaded or welded form from 150 lbs to 2500 lbs. 200 Nickel Alloy Long Radius Elbow, 201 Nickel Alloy Long Radius Elbow, 20 Nickel Alloy Long Radius Elbow.

As most bent pipes do not alter the ends of the piping, pipe bends are often easy to implement within a processing system using standard welding processes, flanges, or other connection methods.

Hastelloy C-276 pipe fittings refer to factory-made wrought nickel alloy fittings manufactured to ASTM B366 UNS N10276. It can be designated as CRHC276(corrosion resistant fittings) or WPHC276(ASME pressure fittings). The fittings can be manufactured from pipe or tube of ASTM B619, B622, B626 UNS N10276, plate, sheet or strip of ASTM B575 UNS N10276, forging or bar of ASTM B564, B462, B472, B574 Gr. N10276. The Hastelloy C-276 fittings are mainly furnished in 3 connection types: butt welding, threaded, socket welding, covering a variety of standard specifications.

ASTM A 403 WP 316L is very durable across acidic and chemical toxicants. The grade has a specific thermal capacity of 500 at 20/kg K. The robust A403 WP316L module has a minimum tensile strength of 485mpa with a minimum yield strength of 170mpa and can be elongated by 40% in the system.

ASTM A420 is the standard specification for pipe fittings of wrought carbon steel and alloy steel for low temperature service. These fitting, either of seamless or welded construction, are primarily used in pressure piping and pressure vessel service at low temperatures. Metals-Piping can provide all the four steel grades covered by ASTM A420: WPL6, WPL9, WPL3, and WPL8.

Cold bending methods often rely on sheer physical force to help bring the pipe to its final shape while hot bending methods use careful heating to reduce the force required.

Stainless steel 316L elbows are used to divert pipes or turn them in another direction. It provides high creep and excellent fracture stress resistance at higher temperatures. They are said to be ideal for manufacturing or forming applications.

With Up To 3000 Ton Capacity Proficient Of Cold Forming 8″ Nb SS 304 Fitting And ASTM A403 WP304 Elbow Upto 12″ Nb And Wall Thicknesses Upto 0.75″ Thick As Per Ansi/ Asme B16.9.

Of all the duplex steel categories, standard duplex steels are the most widely used alloys. As a cost-effective alternative to nickel-rich alloys, duplex fittings offer moderate performance. However, the mechanical properties of duplex steels are much higher compared to austenitic alloys such as 304.