M4-M64 Alloy B7 round head bolt and washer manufacturer

This is useful for selecting bolts with different strength levels for different high pressure and high temperature applications. ASTM A193 grade b7 hex bolts and other types have a minimum tensile strength of up to 125ksi.

The grade mark consists of the grade symbol “2H” and the manufacturer’s identification mark.

ASTM A193 Grade B7 Heavy Duty Hex Head Bolts are high strength fasteners made from heat treated alloy steel AISI 4140/4142 quenched and tempered.

Standard ASTM A193 B7 fasteners typically have a common bare metal finish. However, ASTM A193 Grade B7 studs can be galvanized, hot-dip galvanized, xylan coated, teflon coated if requested by the buyer. Coating ASTM A193 B7 fasteners can help improve the corrosion resistance of fasteners. This ASTM A193 Grade B7m bolt is typically used to fasten medium high temperature service materials. These bolts are liquid quenched from 50¡ãF to 900¡ãF and they can be air quenched from -40¡ãF to 900¡ãF.

ASTM A193 Grade B7 bolts and studs are made from chrome molybdenum steel and are quenched and tempered (heat treated) to achieve the desired mechanical properties (strength). Grade B7 is the most commonly used A193 bolt grade in construction.

The term “bolting material” as used in this specification covers, rolled, forged or strain hardened bars, bolts, washers, screws, studs and stud bolts.

Bolts are chrome molybdenum heat treated steel according to ASTM A193 B7m specification for bolts. The primary alloy components of ASTM A193 Grade B7 bolts are chromium and molybdenum. These ASTM A193 B7 Metric Bolts are manufactured by heat quenching and tempering. Heat treating A193 B7 bolt material helps to develop desired mechanical properties such as increased tensile strength of ASTM A193 B7 hex bolts after heat treatment.

A193 B7 threaded rods are also known as hex bolts. It has threads on both ends and it is a relatively long rod.

ASTM A194 Class 2h bolts are carbon base steel heavy duty hex nuts. Sa194-2h material is a common high strength nut. This specification ASTM A194 Class 2h washers are typically used in conjunction with the following fastener standards – A193 Class B7, A325, A490.

ASTM A193 Grade B8M Grade 1 Fasteners are similar to Grade B8 but are made of AISI 316 stainless steel instead of AISI 304 stainless steel. Type 316 stainless steel has better corrosion resistance than type 304 stainless steel due to the addition of molybdenum.

ASTM A193 Grade B7M bolts and studs have the same chemical composition as Grade B7 (quenched and tempered medium carbon alloy steel) but have lower strength requirements requiring 100% hardness testing on all fasteners manufactured in the batch. Grade B7M bolts are resistant to chloride, sulfide and hydrogen stress corrosion cracking (SCC) and are often used in sour gas service.

A194 2H nut is a common high strength nut used with many different bolt grades, including A193 Grade B7, A325, A490, etc.

Grades 7, 7M, 8 and 8M have 8-10% nickel added. Grade 8 material lacks molybdenum, but Grade 8M ASTM A194 2h material contains all the elements mentioned in the composition, making it the strongest and most expensive class of materials in this grade.

Producing Standard
ASME B18.2.2
DIN 934 

ASTM A194 bolts include metals such as manganese and silicon, with additions of phosphorus, sulfur, and carbon. ASTM A194 gr 2h bolts are suitable for high pressure or high temperature service, or both. Further machining is possible by centerless grinding or cold drawing.

B7 and B7M shall be heat treated by quenching in a liquid medium and tempering. For B7M fasteners, the final heat treatment, which may be the tempering operation if conducted at 1150 ¡ãF [620 ¡ãC] minimum, shall be done after all machining and forming operations, including thread rolling and any type of cutting.

Carbide solution treatment, also known as solution annealing, is a process in which fasteners or stainless steel rods are heated and then water quenched to ensure maximum corrosion resistance. A193 Grade B8 Grade 2 bolts are strain hardened after carbide solution treatment to improve strength properties and reduce the potential for wear.

ASTM A193 B7 bolts are manufactured to meet numerous specifications and material design properties. More specifically, B7 alloy steel is a high temperature grade of A-193. B7 steel is also a chromium molybdenum steel with a minimum tensile strength of 125ksi.

The ASTM A320 specification, originally approved in 1948, covers alloy steel and stainless steel bolting materials for low temperature service.

B7 threaded studs and short head bolts are readily available in the market. B7 grade bolts are often used for pipe flange connections. These bolts are usually sold in a normal bare metal finish, but are usually hot-dip galvanized, galvanized, Xylan coated, PTFE coated, or otherwise treated with a corrosion resistant coating.

ASTM A193 Grade B8 Grade 1 Bolts and Studs Made of AISI 304 Stainless Steel. Type 304 is the most commonly used stainless steel grade in the fastener industry.

ASTM A193 Grade B7 is the standard material specification for chromium-molybdenum alloy steel fasteners for high-strength, high-temperature, and special-purpose applications. Grade B7 is a heat treated chromium molybdenum alloy steel with a minimum tensile requirement of 100 ksi, a yield strength of 75 ksi and a maximum hardness of 35 HRC. The ASTM A193 specification covers requirements for chemical composition, mechanical properties, hardness, heat treatment, and recommended nut washers for Class B7 fasteners. ASTM A193 Grade B7 is the broadest specification for fasteners, commonly found in bolts or pipes, pressure vessels, valves, flanges and fittings.

ASTM A320 L7 Stud Bolts are designed for low temperature performance. These fasteners are commonly used in valves, flanges, fittings and pressure vessels. The ASTM specification recommends a minimum impact value of 20-ft-lbf -150F for ASTM A320 L7 studs.

Grade B7 is a heat-treated chromium-molybdenum alloy steel with minimum tensile requirement of 100 ksi, yield of 75 ksi and maximum hardness of 35 HRC.

ASTM A193 Grade B7 is a standard material specification for chromium-molybdenum alloy steel fasteners for use in high tensile, high temperature and special purpose applications.

ASTM A194 specification covers carbon, alloy and stainless steel nuts for high pressure and/or high temperature service. American National Standard Heavy Duty Hex Series (ANSI B 18.2.2) shall be used unless otherwise specified. Nuts no more than 1 inch in nominal size shall conform to UNC Series Class 2B.

It is a standard specification defining typical chemical composition, mechanical properties, hardness requirement, preferential heat treatment, product marking, certification and other requirements, suitable for bolting used in pressure vessel service, valves, flanges and fittings. ASTM A193 defines both SI (Metric) and inch-pound units.

ASTM A193 Grade B7 specification covers the requirements for high strength alloy steel bolting materials for high temperature or high pressure service and other special purpose applications. It is a standard specification that defines typical chemical composition, mechanical properties, hardness requirements, preferential heat treatment, product marking, certification, and other requirements for bolted connections used in pressure vessel service, valves, flanges, and fittings. ASTM A193 defines SI (metric) and inch-pound units.

ASTM A320 L7 washers are specially engineered for LOW temperature performance. These fasteners are commonly used for valves, flanges, fittings, and pressure vessels.

ASTM A320 bolts are suitable for low temperature service down to -150¡ãF and have a minimum Charpy impact value of 20-ft-lbf at this temperature. ASTM A320 Hex Bolts must obtain the durability and service of high temperature or high pressure and corrosion resistant steel. ASTM A320 Stud Bolts are available in different sizes and patterns, our premium ASTM A320 Grade L7 AS Bolts are in high demand in the market due to their speculative properties and specifications.

ASTM A320 Class L7 fasteners are manufactured using high strength materials ideal for the manufacture of fastener product bolts, studs and bolts that can be used in a wide range of high temperatures in bolting applications.