male thread alloy steel pipe fitting

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

HT PIPE has a large range of finished and semi-finished stainless steel elbows, caps, tees, reducers, crosses, stub ends and many other stainless steel butt welding fittings, widely used in power plants, oil and gas, water treatment, food Process, petrochemical, LNG industry, automotive, heavy engineering, offshore and chemical. We can supply butt welded pipe fittings individually or in combination with our other plumbing products.

Coupling is a kind of fittings commonly used in industrial pipe connection.

The Curie temperature of this alloy lies within the ambient temperature range and is affected by changes in the alloy’s chemical composition. Caution is recommended in applications requiring strong non-magnetic properties.

Carbon steel forged fittings and flanges are prevalent and common used in industries, the representative material grade is ASTM A105 and A350 LF2/LF3.

HT PIPE is a manufacturer, stocker and supplier of high quality Nickel Alloy 200 Olets, which are manufactured under the expert guidance of our hardworking staff.

Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and reliability. Suitable for various industrial applications such as vibration, high pressure or corrosive conditions. To improve sealing and reduce wear*, the manufacturer recommends using both Grey Stainless Steel PTFE Thread Sealing Tape and Welded White Seal Plus Multipurpose Fitting Compound.

ASTM A105 fittings possess a minimum tensile strength of 485mpa with a minimum yield strength of 250mpa. These fitting can be elongated by 22% and possess a hardness of 137 to 187 HBW. Our company is an ASTM A105 Forged Fittings manufacturer in India who make use of top-of-the-line technology to produce the best components in the industry. These coupling can be half or fully coupled. The Full Coupling A105 is employed in connecting small bore pipes. It is utilized in connecting a pipe to another pipe or to a swage or nipple. A105 Half Coupling is utilized for smaller bore branching from a large pipe bore. These couplings can be threaded and welded. A105 Threaded Coupling is preferred in applications where stress on the system is less. We are exporter and manufacturer of Carbon Steel A105 grade for forged pipe fittings.

Like the other socket pipe fittings, it has a ladder shaped area, so to insert the pipe into the tee branches then welding together. It usually used for small diameter tubing systems.

The alloy exhibits excellent resistance to seawater and brine, making it well suited to marine applications.

A105 is American ASTM standard number,¡±A¡± stands for common carbon structural steel.ASTM A105 is the most common carbon steel material under ASME/ANSI/API/MSS standard.It¡¯s standard specification for carbon steel forgings for piping applications.

Equal cross, generally for the professional term, four for pipe fittings, pipe connectors, used in the main pipeline to branch pipe.

Some of them are flange and forge fittings. They are for smaller diameter piping. This carbon steel material grade ASTM A105 is the best fit in pressure systems that need service at high temperatures.

This type of metal is able to withstand high temperatures, which makes it a good choice for industrial applications. It is also strong, durable, and rust-proof. Aside from being corrosion-resistant, stainless steel 304 has a high level of ductility and weldability.

Apart from this, they can be easily elongated by 30% and still possess excellent workability.

ASTM A105 (also known as ASME SA 105) covers seamless forged carbon steel piping components for use in pressure systems at ambient and high-temperature service.

Inconel 600 is non-magnetic, has excellent mechanical properties, combines high strength with good workability, and is easy to weld. Alloy 600 exhibits cold forming properties typically associated with chromium-nickel stainless steels.

The alloy steel slides on these elbows can be machined and polished in a stress-relieved condition.

Stainless Steel Forged Screwed-Threaded Union Suppliers, ASME B16.5/ B16.9/ B16.11/ B16.36/ B16.25/ B16.49 Stainless Fittings, ASTM A182 Forged Screwed-Threaded Union, threaded pipe fittings & socket weld pipe fittings manufacturers

HT PIPE is one of the leading manufacturers and exporters of high quality nickel alloy 201 pipe fittings, which are ferromagnetic.

These Nickel 201 Ferrule Fittings are an improvement over Nickel 200 to control carbon and prevent it from embrittlement due to intergranular deposits in many processes at temperatures between 600¡ãF and 1400¡ãF. Our Nickel 201 double ferrule fittings also have a high Curie temperature and good magnetostrictive properties. These annealed alloy 201 pipe fittings have low hardness and good ductility and ductility.

We pride ourselves on being at the forefront of innovation in both product lines and after sales services. This is why we will constantly upgrade our products and services to meet market expectations and demands.

Forging is one of the oldest methods used to form metal parts, improving their mechanical properties such as fatigue, impact resistance and corrosion.

A105 forged fitting is like high tensile strength, rugged construction, and anti-corrosive in nature, flexibility, durability, low maintenance, excellent surface finishes, and good dimensional accuracy.

Global Supplier of ANSI B16.9 90 Deg Pipe Fittings Elbow, Buttweld Elbow 90 Degree, Butt Weld Long Radius 90 Degree Elbows, Stockist of Stainless Steel 90 Deg. Elbow, 90 degree Short Radius Elbow Dealer in China, ASME B16.9 90 deg Long Radius Elbow, Schedule 10 90 Degree Elbow.

The length of the pipe nipple is usually specified by the overall length with threads. It may have a hexagonal section in the center for the wrench to grasp (sometimes referred to as a ¡°hex nipple¡±), or it may simply be made from a short piece of pipe (sometimes referred to as a ¡°barrel nipple¡± or ¡°pipe nipple¡±).

The alloy can be machined at satisfactory speeds with machine tools commonly used in the industry. Generally, cold drawn or cold drawn stress relief materials are recommended for the best machinability and smoothest finish.

A bushing is a type of bearing. Generally speaking, “bearings” facilitate movement between two components while reducing friction. Simple in design, a typical bearing has two surfaces that roll against each other, allowing the two mating parts to move without friction.

Nickel alloy is a component that contains nickel as a principal element and in higher concentration. It is a solid material that offers wide solubility with iron, chromium, and copper as well. The alloy is present in combined form as well. Nickel alloy is highly versatile and able to sustain heat and corrosion resistance.

The pipe fittings of special shape or those not suitable for die forging can be manufactured by free forging process.The rough shape of pipe fitting should be forged by free forging; If the tee, should be forged out of the branch pipe.

Stainless Steel 304 Forged Pipe Fittings is a versatile material that can be used in many different applications. When compared with SS 304H Forged Fittings, SS 304 Forged Fittings are better corrosion resistant, more ductile, and lighter, making them excellent choices for industrial applications.