Inconel 600 exhibits cold forming characteristics normally associated with chromium-nickel stainless steels.
Typical corrosion applications include titanium dioxide production (chloride route), perchlorethylene syntheses, vinyl chloride monomer (VCM), and magnesium chloride.
Alloy 600 is used in chemical and food processing, heat treating, phenol condensers, soap manufacture, vegetable and fatty acid vessels and many more.
Resistant to a wide range of corrosive media. The chromium content gives better resistance than Alloy 200 and 201 under oxidizing conditions, at the same time the high nickel gives good resistance to reducing conditions.
Virtually immune to chlorine ion stress corrosion cracking. Demonstrates adequate resistance to organic acids such as acetic, formic and stearic. Excellent resistance to high purity water used in primary and secondary circuits of pressurized nuclear reactors.
Little or no attack occurs at room and elevated temperatures in dry gases, such as chlorine or hydrogen chloride. At temperatures up to 550C in these media, this alloy has been shown to be one of the most resistant of the common alloys.
At elevated temperatures the annealed and solution annealed alloy shows good resistance to scaling and has high strength.
The alloy also resists ammonia bearing atmospheres, as well as nitrogen and carburizing gases.
Under alternating oxidizing and reducing conditions the alloy may suffer from selectiveo xidation.
Thermocouple sheaths. Ethylene dichloride (EDC) cracking tubes.
Production of caustic alkalis particularly in the presence of sulfur compounds.
Reactor vessels and heat exchanger tubing used in the production of vinyl chloride.
Process equipment used in the production of chlorinated and fluorinated hydrocarbons.
In nuclear reactors uses are for such components as control rod inlet stub tubes, reactor vessel components and seals, steam dryers and d separators in boiling water reactors.
In pressurized water reactors it is used for control rod guide tubes and steam generator baffle plates etc. Furnace retort seals, fans and fixtures.
Alloy 600 is non-magnetic, has excellent mechanical properties and a combination of high strength and good workability and is readily weldable.
Roller hearths and radiant tubes, in carbon nitriding processes especially.
Alloy 625 (UNS N06625) is a nickel-chromium-molybdenum alloy with an addition of niobium.
The alloy resists a wide range of corrosive environments and has a good resistance to pitting and crevice corrosion. IN625 has good corrosion resistance in various corrosive environments.
Inconel is a superalloy made with high concentrations of nickel, chromium, and molybdenum.
The Inconel 625 is highly resistant against corrosion and oxidations mediums in various environments.
These alloys possess superior ductility and excellent formability.
They can be welded easily and resist post-weld carburization or graining.
The Inconel 625 material used in producing the products in this grade possesses superior strength and hardness.
They have a minimum tensile strength of 120Ksi and minimum yield strength of 60ksi.
Apart from this, they can be easily elongated by 30% and still possess excellent workability.
These alloys are widely used in chemical processing, pollution control, evaporator, nuclear reactors, marine industries, and so on.
The Inconel Alloy 625 is immune against chloride stress cracking.
These alloys can suffice in high pressures and extreme temperatures.
They can be either cold or hot rolled in different shapes to suit various applications.
