Materials

Just as the corrosion resistance characteristics of carbon steel could be improved by further processing, it is possible to increase the mechanical properties of the ASTM A105 Fittings with the use of heat treatments.

Per specifications like the ASTM A105, using methods such as subjecting the material to normalizing, annealing, tempering, or quenching can bring about a noticeable change in the mechanical properties of the ASTM A105 Reducer.

With the specification acting as a guide, it is required that the material follow some requirements. Along with the tensile and yield strength, the ASTM A105 Elbow must adhere to the requirements of the specification for details such as reduction of area, elongation, and hardness requirements.

HT PIPE become one of the leading and most trusted manufacturers and suppliers of ASME SB564 Inconel Grade 625 Flanges in Mumbai, India By supplying the highest quality products to our customers. We are Offering reasonable prices incorporating large discounts against a range of Inconel Alloy 625 Flanges.

Our WNR 2.4856 Flanges retains potency over an extensive temperature range, striking for elevated temperature applications where steel and aluminum would yield to sneakby means of thermally persuaded crystal vacancies. These are accessible to our valuable customers in different range of diameters, wall thicknesses and sizes at quite affordable rates.

As a much-admired organization in the market, we as Rexton are quite engaged in proposing a collection of Inconel Flanges as an exporter, manufacturer, supplier, and stockiest to our worldwide clients at reasonably priced costs.

The main applicants of Alloy 625 Forging Flanges include industries like marine and petroleum industries. Other advantages of using the Inconel 625 Flanges involves high fracture toughness as well as fabricability.

Inconel 625 Flanges are a corrosion-resistant and strong nickel-chromium alloy with 58% nickel and 20% chromium, carbon, manganese, silicon, sulfur, copper, and iron. The flange material has a tensile strength of 930MPa and a yield strength of 517MPa.

ASTM B564 Inconel 625 flanges possess a high degree of formability, while demonstrating better weldability in comparison to many other highly alloyed nickel based materials.

The minimum yield strength of the flanges is 517MPa and the minimum tensile strength is 930MPa. These are relatively high strength flanges compared to most stainless steel flanges. The high strength of the Inconel alloy 625 Slip on Flanges and the other types comes from the material composition. The material is made up of 58% nickel, 20% chromium, carbon, manganese, silicon, sulfur and 5% iron. The high nickel and chromium content make the flanges highly corrosion resistant.

The Alloy 625 Blind Flanges and other types also have very high melting point of 1350 degrees Celsius. The high melting point allows the flanges to be used in high temperature applications along with the strengths allowing these for high pressure applications as well.

There are different types of flanges such as the Alloy 625 Slip On Flange and others. All these types belong to the specifications ASTM B564 for nickel alloy, Inconel, monel and hastelloy falnges.

The sizes range from 1/2 inches to 60 inches depending on the type of the flanges.

Carbon Steel Flange and end flange connectors are basically made of carbon steel. Common standards include ASTM A694, ASTM A105N (SA105N), MSS SP-44, DIN 2533. Accompanying pressure ratings are from class 150 to 2500.

As carbon element content increases, the steel will become harder and stronger after heat treatment. On the contrary, it become less ductile. Where if without heat treatment, higher carbon will reduce weldability.

Carbon steel may include alloy steels in case it is not used as stainless steel.

Carbon steel pipe flanges usually adopt mild steel or low carbon steel, as it includes small percentage of carbon, strong and tough but not readily tempered. Which with lower cost and material could be used for many applications.

ASTM A105 steel grade is a typical common material (mild carbon steel) for forged carbon steel flange, it used in a lot of places for ambient and higher-temperature service in pressure systems.

This material is durable, cost lower, and difficult to break. In case used in a stainless steel piping system it shall be adapted with a lap joint end ring.

Designed specifically for low-temperature usage, this carbon steel grade shares close similarities with ASTM A105N (SA105N) grade. This grade requires notch durability testing, and applicable for many industries.

The standards set for ASTM A694 is more rigorous than the two above. Its requirements for high-pressure fluid transmission of oil and gas piping is stringent. Because of the stringent conditions with the steel grade, manufacturers have to develop an even stronger steel for both low temperatures and high temperatures.

Carbon Steel Flanges are manufactured either by forging or by casting.

Our rapid lead times are some of the quickest in the industry so you will never have to worry about hitting your deadlines. A majority of our business originates from the United States and Canada, but we are quickly becoming a global supplier.

These are presented with pressure numbers Pn6 through PN64. The applications of the 601 Alloy Weld Neck Flangeis in the chemical, power plant, petroleum and petrochemical industrial applications.

HT PIPE is specialized in supplying the very good quality of Inconel 601 flanges that are actually created using premium quality of raw materials.

The production of flanges is also done by using the latest technology and modern equipment because of which no doubt greater superiority in product quality is added.

To the buyers, the flanges are provided at different specifications that are easily fulfilling the demand of all buyers. The product to its buyers is provided at reasonable rates only.

Inconel 601 Flanges are made up of a nickel chromium alloy. The material grads range differently with the composition ratio. The 601 grade has 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron in the composition.

There are different types such as socket weld flanges, welded neck flanges, Inconel 601 Slip On Flanges, orifice flanges and so on. The flanges made of this material are strong, corrosion resistant to acids, reducing agents and oxidation and are also harder.

The Alloy 601 Flanges have 550MPa minimum tensile strength, 205MPa minimum yield strength and 30% elongation rate.