monel 400 flange UNS N04400 flange WN flange RF sample

Hastelloy C-276 is a Ni Mo CR superalloy added with tungsten, which has excellent corrosion resistance in a wide range of harsh environments. The high content of Ni and Mo makes the Ni steel alloy particularly resistant to pitting and crevice corrosion in reducing environment, while CR transfers the performance of anti-oxidation medium.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

We are manufacturers of Alloy 20 Lap Joint Flanges that exhibit an ameliorated general corrosion resistance to sulphuric acids, much needed in the synthetic rubber manufacturing plants and mixing tanks.

Our Hastelloy B2 Ring Joint Type Flanges is not recommended for use in the presence of ferric or cupric salts as these salts may cause rapid corrosion failure. Ferric or cupric salts of these Hastelloy B2 Nippo Flanges may perhaps develop when hydrochloric acid comes in contact with iron or copper.

We offer these Inconel Alloy 800, 800H, 800HT Flanges in custom-made shapes and sizes as per the requirements given by our clients, and that too at an affordable and market leading prices. This alloy is extremely functional as it maintains a stable structure, even when exposed to high temperature. The inconel is extremely resistant to corrosion, even in acidic environment.

In addition to basic alloys, our flanges are available in titanium, aluminum, cobalt, boron, copper, iron and other metals. Inconel 718 flanges offer uncompromising protection against oxidation and corrosion factors.

ASTM B564 601 Raised Face Flange Inconel 601 Flanges are made up of a nickel chromium alloy. The material grads range differently with the composition ratio. The 601 grade has 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron in the composition. There are different types such as socket weld flanges, welded neck flanges, Inconel 601 Slip On Flanges, orifice flanges and so on. The flanges made of this material are strong, corrosion resistant to acids, reducing agents and oxidation and are also harder.

Incoloy 800/800H/800HT WN SO SW flange
Incoloy 800/800Ht Flanges have some excellent features like tough design, durable, and high tensile strength, etc. For heat exchangers, carburizing equipment, nuclear-steam generator, processing pipe, and heat -element sheathing Incoloy 800 slip-on flanges are used. Incoloy 800HT Flanges is made up of content of nickel-iron-chromium. It also ensures the best high-temperature properties due to the aluminum and titanium contents present in it. Superior resistance to oxidation is offered due to the mixture of nickel and chromium.

Incoloy 800 flanges (B564 N08810 blind flanges) can be used in heat treatment equipment, chemical and petrochemical processing. Alloy 800 flanges are non-magnetic, high strength and good weldability.

Monel 400 UNS N04400 1/2″ Class 150 RF the Monel 400 Flanges shows evidence of excellent temperature. On the other hand, properties such as Strength and hardness of the Monel 400 Lap Joint Flange is only slightly diminished with regards to the other properties like ductility or impact resistance.

Hastelloy C2000 lap joint flanges are used for heat treatment applications. They have very little carbon content and high nickel content, which makes them much stronger than any other flanges.

These are widely used in various application industry. We also offer a wide range of monel 400 / K500 Flanges are available in various size, specification & thickness as per the clients requirements.

Nickel 200 flange The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

By itself, nickel has great heat resistance properties, but when alloyed with other elements, it gains many properties, just like in the case of the Inconel 600 Flanges.

The nickel content of Alloy 825 makes it resistant to chloride stress-corrosion cracking, and combined with molybdenum and copper, provides substantially improved corrosion resistance in reducing environments when compared to conventional austenitic stainless steels.

The sizes range from 1/2 inches to 60 inches depending on the type of the flanges.

Inconel 718 flanges have excellent mechanical properties over a wide temperature range. These Inconel 718 flanges have high creep rupture strength at elevated temperatures up to approximately 700 degrees Celsius (1290 degrees Fahrenheit).

Inconel 601 Flanges are made up of a nickel chromium alloy. The material grads range differently with the composition ratio. The 601 grade has 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron in the composition.

ASTM B564 Incoloy 800/800H/800HT/825 Blind Flanges
Incoloy 800/800Ht Flanges have some excellent features like tough design, durable, and high tensile strength, etc. For heat exchangers, carburizing equipment, nuclear-steam generator, processing pipe, and heat -element sheathing Incoloy 800 slip-on flanges are used. Incoloy 800HT Flanges is made up of content of nickel-iron-chromium. It also ensures the best high-temperature properties due to the aluminum and titanium contents present in it. Superior resistance to oxidation is offered due to the mixture of nickel and chromium.

ASTM B564 Nickel Alloy 200 201 Long Weld Neck Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

The alloy is forged between 2250/1750oF (1230/955oC) following a soak at forging temperature of 30 minutes per inch of billet or ingot section thickness. Forging should be started immediately the stock is removed from the reheat furnace and 25/40% reductions help to retain as much internal heat as possible. For optimum corrosion resistance, forged parts should be subsequently annealed. See Heat Treatment.

High temperature applications exist due to the thick and stable passivating oxide layer formed when Inconel 718 is heated. ANSI B16.47 Inconel 718 flanges are vital to the food, beverage and food processing and textile industries, primarily to create waterproofing systems during pipeline evaluation.

ASTM B564 UNS N08825, also known as Incoloy 825, is a high nickel alloy that is used in high corrosion and high temperature applications. It has different designations in different countries: ASTM B424 Gr. UNS N08825(US), DIN 17750 Gr. 2.4858, JIS G4902 Gr. NCF 825.

B3 Hastelloy Flanges has special chemistry designed to achieve high thermals stability than the Alloy B 2, performing in easier fabrication.

Inconel alloy is a family of nickel-chromium superalloys and a trademark of Special Metals Corporation. Inconel 601 is resistant to high-temperature oxidation. The alloy also has good resistance to aqueous corrosion, has high mechanical strength, and is readily formed, machined, and welded.

This combination of the four most predominant elements in inconel 625 also gives Inconel 625 wn flange grade 150 excellent resistance to a variety of unusually severe corrosive environments and high temperature effects such as chemical oxidation and carburization effect.

We have expanded ourselves as well our services, products and production patterns, emerging as a manufacturing and exporting giant, in Stainless Steel, Carbon Steel and Alloy Steel, and other hard-to-find metals.

incoloy 800 flange incoloy 800 Flanges have some excellent features like tough design, durable, and high tensile strength, etc. For heat exchangers, carburizing equipment, nuclear-steam generator, processing pipe, and heat -element sheathing Incoloy 800 slip-on flanges are used.

Alloy C22 flanges are particularly parallel to Alloy C276 and are also an excellent corrosion and heat resistant product. At the same time, the nickel-chromium-molybdenum material it forms also contains tungsten, which enhances a complete erosion barrier compared to most different parallel products. Our UNS N06022 flanges prevent push erosion damage, hole consumption and set-up. These are available to our profitable customers at very affordable prices and come in a range of spans, divider thicknesses and sizes.

Alloy ASTM B564 800 Long Weld Neck Flanges
Alloy 800 Flanges, which is a nickel-iron-chromium alloy with additions of copper and molybdenum. Outlet Gr. 800 Slip On Raised Flanges are very much easy to install and remove and can be available for our clients in different technical specifications of threading and sizes.

ASTM B564 Uns N06601 Flange Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Nickel 200 Slip On Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.