MONEL400 ROUND BAR PMI testing

Inconel 600 is a nickel-chromium-iron alloy with excellent corrosion resistance, oxidation resistance and high strength at elevated temperatures. Due to its high nickel content, Inconel 600 is extremely resistant to chloride ion stress corrosion cracking. Age hardening is not required as Inconel 600 is hardened and strengthened by cold work only. The Inconel 600 can operate in temperatures as low as 700¡ãF (370¡ãC).
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Nickel 200 is a solid solution strengthened metal. Nickel 200 Bar Stock contains 99.6% wrought nickel by weight and is considered commercially pure nickel. DIN 2.4066 Bar has good mechanical and physical properties. For example, ASTM B160 N02200 has excellent resistance to many corrosive compounds as well as corrosive environments. Meanwhile, Nickel 200 is a solid solution strengthened wrought alloy that can be designed as round bars and rods. These two components are used interchangeably and can be distinguished from certain key functions.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Round bars are cold drawn and annealed, available in stock lengths or cut to size. Alloy round bars provide strength and corrosion resistance in a variety of environments and can be used in the frame, machine part manufacturing, food service and medical device industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Nickel alloy 601 rods consist of 58-63% nickel. Inconel is a general purpose nickel-chromium-iron alloy. It is popular as an engineering alloy and 601 is best suited for applications requiring heat and corrosion resistance.

The alloy 601 also has good resistance to aqueous corrosion.

Nickel 200 Round Bar is a commercially pure wrought nickel. It has excellent resistance to a variety of corrosive environments and good mechanical properties. Other useful features of this alloy are its magnetic properties, high electrical and thermal conductivity, low vapor pressure and low gas content.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Titanium additions stabilize the alloy against intergranular corrosion susceptibility by appropriate heat treatment. The resistance of Incoloy? 825 to general and localized corrosion under a variety of conditions makes the alloy versatile.

Alloy 600 is a nickel-chromium-iron alloy characterized by: good mechanical properties at low, room and high temperature, very good resistance to stress corrosion cracking, even at high temperature, high temperature corrosion resistance to dry chlorine and hydrogen chloride Good resistance and good resistance to oxidation, carburization and nitriding.

C71500 round bar are just the ones for you! Cupronickel is highly resistant to corrosion by salt water, and is therefore used for piping, heat exchangers and condensers in seawater systems, as well as for marine hardware.

Inconel 600 round bar is also known as Alloy 600 or UNS N06600/W.Nr. 2.4816. Chemically, Inconel 600 Din 2.4816 Bar consists of three main alloying elements, namely nickel, chromium and iron, of which nickel is the main component of the alloy.

The Nickel Alloy 601 Cold Finished Bar is formed after the hot-rolling process comes to an end.

High levels of chromium and molybdenum provide excellent resistance to localized corrosion. The high nickel content provides very good resistance to stress corrosion cracking.

Alloy 800H rods are designed to have a uniform cross-sectional area and can be produced in square, round or rectangular sizes. Versatile ASTM B408 UNS N08800 rods are rigorously tested to detect and eliminate any defects in these robust assemblies.

Round bars are widely used in the machining industry due to their ability to be easily machined and cut. One of the most impressive properties of stainless steel is chromium, which makes it extremely resistant to corrosion. Stainless steel round bars can be found in the food industry, automotive components and machine parts in the manufacturing and construction industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

One of the most important characteristics of Monel 400 is that stress corrosion cracks do not occur in general, and the cutting performance is good. The structure of Monel 400 is single phase solid solution with high strength.

Inconel 625 round bars are also used in nuclear reactors, combustion systems, rocket thrust chamber tubes, transition liners, compressor blades, turbine seals, and more. It has excellent formability and solderability due to its high nickel content. 625 Round Bar has excellent resistance to a variety of acidic environments such as nitric, sulfuric, hydrochloric and phosphoric environments. In addition, they provide protective properties, surrounded by alkali metals.

2.4375 Monel K500 round bar is non-magnetic, as an alloy, Monel K500 ASTM B865 hexagonal bar exhibits excellent mechanical properties over a temperature range from sub-zero settings to 480C. Monel ASTM B865 hollow bars require annealing when welded, and weldments should be stress relieved to the alloy prior to aging.

Inconel 601 is a nickel-chromium alloy with strong oxidation resistance at 2200¡ãF. Alloy 601 produces a tightly adherent scale that resists spalling even under severe thermal cycling. The alloy has good high temperature strength and retains its ductility after prolonged use. Alloy 601 has good resistance to hot corrosion under oxidizing conditions. Alloy 601 is not recommended for strongly reducing sulfur-containing environments.

4140 Alloy Steel Round Bar, a cold drawn annealed steel with high hardenability, its chromium content provides good hardness penetration, and molybdenum imparts hardness uniformity and high strength. 4140 alloy steel rounds respond well to heat treatment and are relatively easy to machine in the annealed condition. 4140 alloy steel round has good strength and wear resistance, excellent toughness, plus good ductility, and the ability to resist stress at high temperature.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Hastelloy C-276 has excellent resistance to pitting as well.C276 alloy is suitable for many chemical process applications.

Hastelloy C276 grade round bars can be used in FGD systems due to their excellent resistance to sulfur-containing compounds and chloride ions encountered in most scrubbers. Alloy C276 Hastelloy bar also has excellent resistance to localized corrosion such as pitting, and the alloy is resistant to stress-related corrosion cracking. Hastelloy C276 N10276 Bright Bar is also one of the few materials that can withstand the corrosive effects of chlorine in the form of wet chlorine gas, hypochlorite and chlorine dioxide.

Inconel X750 is a nickel-chromium alloy that has been used for both wrought products and castings. Inconel X750 offers excellent resistance to corrosion and oxidation along with high strength and good toughness properties at elevated temperatures.

Incoloy 800 is a nickel, iron and chromium based alloy. Incoloy 800 bar is not only known for its good strength, but also has excellent resistance to oxidation and carburization when exposed to high temperatures. Two additional alloys can be derived from Incoloy 800. They are Incoloy 800H and Incoloy 800HT.

Improvements in alloy metallurgy, melting techniques and thermomechanical processing led to the development of Alloy 31, a relatively low cost alloy with high corrosion resistance.

Alloy 625 (UNS N06625) can be used in round bar, flat bar, extruded section, tube, tube, plate, sheet, strip, plate, hexagon, forging, extruded section and wire. View stock listings, sheet stock listings or contact sales for more availability.

Unlike austenitic stainless steels, Inconel 625 round bars offer the advantage that they are less susceptible to chloride-induced stress-related corrosion cracking.

Alloy 625 (UNS N06625) is a nickel-chromium alloy that is hardened by the addition of molybdenum and niobium, so the alloy does not need to be aged. It has excellent resistance to various corrosive environments and the high temperature effects of oxidation and carburization.

Incoloy 825 is stable annealed at 940°C. The softest structure was obtained at 980°C. Sections heavier than sheet, strip and wire should be quenched to avoid sensitivity.

G30 alloy can prevent the formation of grain boundary precipitation in the heat affected zone of welding, so its welded products are suitable for various chemical treatment engineering applications.

Nickel Alloy Inconel 625 | UNS# N06250 is a nickel-based superalloy with high strength properties, high temperature resistance, and significant oxidation and corrosion protection. Nickel alloy Inconel 625 shows the ability to withstand high stress environments and has excellent machinability.

Nickel 201 is a solid solution strengthened, commercially pure wrought metal. ASTM B160 UNS N02201 has good mechanical properties and is stable over a wide temperature range. A feature of Nickel 201 is its excellent resistance to many corrosives. This is especially true for hydroxides. Nickel 201 alloy is a modification of Nickel 200. ASTM B160 Nickel 200 Rod (UNS N02200 Rod) and ASME SB160 Nickel 201 Rod (UNS N02201 Rod) can be used in a variety of applications such as food processing equipment, marine and marine engineering, salt production, caustic processing equipment, manufacturing and processing hydroxide Sodium (especially at temperatures above 300¡ãF), reactors and vessels that produce fluorine and react with hydrocarbons.

Incoloy Alloy 800 round bar is chemically equivalent to Incoloy 800 bar, with some tolerances for aluminum, titanium and carbon content. These UNS N08811 Incoloy 800 round bars are available to our valued customers in a wide range of widths, divider thicknesses and sizes to adjust structures at a completely reasonable price.

Inconel 718 is a high strength nickel base superalloy for long term service at low temperatures of 1200¡ãF. The alloy is easy to manufacture and can be welded in the annealed or precipitation (age) hardened condition. Annealed 1700-1850¡ãF, air cooled or faster. Aged 8 hours at 1325¡ãF with furnace cooling held at 1150¡ãF for a total age of 18 hours with air cooling. Alloy 718 exhibits a shrinkage of 0.0008 in/in after precipitation hardening.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements