nickel alloy Alloy 20 UNS N08020 full thread stud bolt DIN975

Hastelloy 276 bolts and fasteners are suitable for most chemical applications in the welded condition. However, it should be noted that in environments where C-276 alloy weld joints are subject to attack, C-22 weld filler material should be considered. Hastelloy C276 socket head cap screws also have excellent resistance to pitting corrosion, stress corrosion cracking and oxidizing atmospheres up to 1900¡ãF.

Monel 400 Bolts and Nuts are made from a nickel-copper alloy for extreme corrosion resistance, especially in sour conditions. The material is also strong and rigid and can be used to produce bolts and nuts for high temperature service. HT PIPE is a leading manufacturer and supplier of Monel 400 Bolts and Nuts of all sizes and types. Among the ingredients are carbon, aluminum, manganese, silicon, iron, sulfur and 63% nickel and 28% copper. This composition gives the material a high melting point.

Known as a heat-resistant alloy, Inconel 825 has excellent properties. The most interesting properties of Incoloy 825 fasteners are their high creep resistance and high mechanical strength despite prolonged exposure to heat. The importance of these attributes in particular is considered critical across multiple industries. Therefore, the use of ASTM B425 UNS N08825 bolts is often associated with industries such as pollution control equipment, oil well and gas gathering, and chemical processing.

Alloy 600, or Inconel 600, is one of the most popular superalloys and is commonly referred to as UNS N06600. Inconel 600 is a non-magnetic nickel-chromium alloy with excellent corrosion resistance and mechanical properties, and good weldability over a wide temperature range.

INCONEL 718 is a high nickel superalloy commonly used in the oil and gas, petrochemical and gas turbine industries. It has excellent mechanical strength, in addition to high corrosion resistance.

Hastelloy fasteners can be used in applications involving a wide range of media, including reducing acids and oxidizing agents. As the most versatile alloy c276 fastener, it is most commonly used for bolting of all Hastelloy grade fasteners.

The high nickel and molybdenum contents make the nickel steel alloy especially resistant to pitting and crevice corrosion in reducing environments while chromium conveys resistance to oxidizing media.

Hastelloy B3 bolts are also known as alloy B-3 bolts and can be found under UNS N10675. This alloy is extremely resistant to pure hydrobromic, sulfuric and hydrochloric acids. Many industries, including the chemical industry, consider the alloy easy to machine, and its ductility allows machinists to easily form and even weld.

Inconel 625 Bolts are used mostly in cyclic cooling and heating applications. They are useful in electric resistance welding applications. The bolts are used in housing of engines, honeycomb structures and in hydraulic lines

The reason ASTM B637 UNS N07718 bolts are ideally chosen for the manufacture of turbine engines. Since a turbine engine operates on basic thermodynamic principles, the efficiency of a turbine engine increases as the turbine inlet temperature increases.

The Alloy K500 Studs are threaded rods with threads on both ends. They can be different types depending on the threaded distance from the center and the thread type. The material is high temperature and high pressure resistant. It has 1350 degrees Celsius melting point, 790MPa minimum yield strength and 1100MPa minimum tensile strength. These values are double the strength of 304 grade.

Hastelloy C2000 fasteners combine the excellent resistance to oxidizing media of C276 with excellent resistance to non-oxidizing environments, making it a unique alloy for protecting chemical process equipment under a variety of conditions, including fluids contaminated with iron ions . It is designed to provide greater versatility than other Hastelloy alloys. This is achieved by increasing the content of chromium and molybdenum and adding a small but effective amount of copper (1.6%). The addition of copper increases the temperature capability of C2000 fasteners in sulfuric, hydrofluoric, and dilute hydrochloric acids.

Fasteners play a critical role in the construction of all sorts of everyday objects. If you¡¯ve done any DIY projects, you¡¯ve likely used fasteners to help get the job done.Fasteners are used for fastening and securing materials such as wood, metal, plastic, or concrete. They include nuts and bolts, threaded rods, structural bolts, machine screws, wedge anchors, washers, rivets, and more in a variety of types and sizes, including metric and inch.

Incoloy A-286 is an age-hardenable iron-nickel-chromium alloy designed for applications requiring high strength and good corrosion resistance at temperatures up to 700¡ãC (1290¡ãF). Like other specialty materials in the Inconel family, Incoloy A-286 fasteners have excellent corrosion resistance and can be made into a variety of fasteners including hex bolts, washers, nuts and studs.

Alloy 20 Socket screws contain a hexagonal socket, or internal drive, in the head. The way to tell if a screw is a socket screw is by the tool required to tighten and loosen it. The general rule of thumb is simple: if you need an allen or hex key, or a special internal wrenching drive, then it can be classed as a socket screw.

INCOLOY alloys belong to the category of super austenitic stainless steels. These alloys use nickel-chromium-iron as the base metal and add additives such as molybdenum, copper, nitrogen and silicon. These alloys are known for their excellent strength at high temperatures and good corrosion resistance in a variety of corrosive environments.

It has a higher melting point around 2400 degrees Fahrenheit to 2460 degrees Fahrenheit. Primarily Monel K500 grade is a spark resistant alloy. This becomes non-magnetic below -200 degrees Fahrenheit. In terms of cold working operations, magnetic structures can be achieved. The Monel nickel-copper composition of Monel 500 is highly resistant to corrosion, making it ideal for many types of industrial applications that require extreme environmental protection, such as salt water and strongly acidic conditions.

Inconel 926 bolt material meets ASTM B446, B564, F467, F468, UNS N06926, DIN EN 2.4856, AMS 5666 and BS 3076 specifications and is adequate for high strength, corrosion resistance and high temperature applications up to 1000o C (1800o F).

Inconel 625 Bolts were developed in the 1960s as a vapor-lined piping material to provide high strength even in extreme high temperatures ranging from freezing low temperatures to 1800¡ãF. Inconel 625 Bolts, also known as Alloy 625, are known for their amazing ability to maintain strength and heat resistance in and out of corrosive environments.

Inconel 625 combines heat resistance, corrosion resistance and strength. Inconel 625 fasteners are used in environments ranging from low temperatures to 1800o F (1000o C). Antioxidant is the main feature. Like alloy C276, Inconel 625 is a nickel-chromium-molybdenum alloy. Adding niobium results in a stronger material. Common applications are marine environment and pollution control equipment.

Alloy C-276 prevents the formation of grain boundary precipitates in the weld heat affected zone, making it useful in most welding conditions for chemical processes.

Inconel Alloy 718 is an alloy containing high amounts of nickel, chromium and molybdenum. It is one of the most popular nickel-based superalloys and is widely used for its excellent resistance to corrosive environments such as crevice and pitting corrosion.

Alloy 625 has excellent weldability and is frequently used to weld AL-6XN? alloy. Matching filler metals are also used to join dissimilar metals.

Extraordinary results with the inclusion of nickel in Inconel 718 Hex Nuts. Today, aerospace is becoming the next market for Inconel 718 hex bolts because of its tremendous performance in elevated and low temperatures.

Incoloy Alloy 800 / 800H / 800HT Fasteners (Nuts and Bolts) series for extreme corrosion resistance even in sour environments. Due to the high nickel and chromium content, Incoloy 800 bolts resist oxidation and carburization at high temperatures. The nickel content provides very good resistance to chloride stress corrosion cracking and pitting. By conventional methods, these fasteners are formed by cold and hot working processes. To increase ductility and hardness, our highly developed cells perform standard welding and forming processes.

Inconel X-750 Nuts are fasteners made from an alloy containing nickel and cobalt as base elements, which contains chromium, with additions of titanium and aluminum. Inconel X-750 fasteners are highly resistant to chemical corrosion and oxidation, with high stress rupture strength and low creep rates at high stresses up to 1500¡ãF (816¡ãC).

Monel 400 and K500 nuts also exhibit excellent corrosion resistance in marine applications and have reasonable corrosion resistance to sulfuric and hydrochloric acids under reducing conditions. A standout feature of monel nuts is their excellent resistance to hydrofluoric acid, a particularly difficult acid to handle, at all concentrations up to the boiling point. For hydrofluoric acid applications, Monel nuts are probably the most corrosion resistant of all commonly used specialty alloys.

Nimonic 80A washers are made from a precipitation hardenable nickel and chromium alloy with the addition of aluminum and titanium. This is manufactured by sourcing the raw material of Nimonic 80A alloy (also known as Alloy 80A). The gasket has good corrosion and oxidation resistance. It is also known for its high tensile strength. Not only does it have creep rupture properties up to 1500¡ãF, that means 815¡ãC. Available in hot forging, cold forging and bar stock forms suitable for working conditions. This is available in a variety of sizes so it can be preferred based on requirements.

Like many other nickel alloys, it is ductile and easy to form and weld. This alloy is used in most industrial environments where corrosive chemical environments exist and other alloys fail.

Hastelloy X is extremely resistant to stress corrosion cracking in petrochemical applications. All product forms are excellent in forming and welding.