nickel alloy fitting steel pipe fittings Inconel 600 601 625 718 elbows

C276 Elbow has excellent corrosion resistance to a wide range of concentrated hot acids and reducing environments and can be easily used in hot sulfuric and hydrochloric applications.

The nickel alloy is dual certified (800H/HT) and combines the properties of both forms. Incoloy 800H/HT alloy was intended for high temperature structural applications.

Due to the addition of chromium, UNS N08800 butt weld elbows are resistant to oxidizing media such as nitric acid, salts and nitrates. These nickel alloy 800HT elbows can withstand high temperature environments and have a good surface finish.

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Type 316L stainless steel in a molybdenum bearing austenitic.

The nickel content makes the alloys highly resistant to both chloride stress-corrosion cracking and to embrittlement from precipitation of sigma phase.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Although HASTELLOY X pipe bend is primarily noted for heat and oxidation resistance it also has good resistance to chloride stress-corrosion cracking and has good resistance to carburization, excellent resistance to reducing or carburizing atmospheres.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The UNS N10276 Fittings have high tensile strength even at elevated temperatures and demonstrate good performance under high pressure. The tensile strength of the ASTM B366 UNS N10276 Stub End is about 105.4 Ksi.The ASTM B366 WPHC276 End Cap has great fabrication properties. B366 WPHC276 is easily fabricated by cold working. Although the Grade WPHC276 Reducer can be hot worked, the process needs to be carried out adhering to certain parameters

ASME SA 403 WP 304 Reducer is a butt welded fitting that reduces pipe diameter at the joint. Stainless steel 304 long radius elbows are another type of elbows with a radius more than twice the diameter of the pipe.

Each method has unique benefits and will determine the degree of bending possible and the final shape of the pipe.

INCONEL (nickel-chromium-iron) alloy 600 is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

It has high quality and erosion resistance. 317 Stainless Steel Elbow is harder than SS ASTM A403 WP317 Buttweld Fittings. It is suggested to utilize chip breakers.

In the piping system, the stainless steel short radius elbow 1.5d is a pipe fitting that changes the direction of the pipe. There are three most commonly used ASME short radius elbows, depending on the angle. In addition to the conventional 45¡ã SR Bw elbow, 90¡ã SR Bw elbow, and 180¡ã SR Bw elbow, other non-normal angle 12-inch short radius elbows such as 60¡ã are also included according to engineering needs.

This means titanium can be used as a replacement for steel¡ªa major benefit, as it is 45% lighter than steel. It is twice as strong as aluminum and 60% denser.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

We manufacture UNS S31803 double pipe fittings with a wealth of benefits. Some benefits are its high mechanical strength and high resistance to corrosion stress cracking. These duplex butt welded fittings are lightweight and therefore ductile;

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

N04400 Butt Weld Pipe Fittings has resistance to chloride induced stress corrosion cracking. Also referred as WNR 2.4360 Butt Weld Pipe Fittings, it has excellent mechanical properties from sub-zero temperatures up to 1020¡ã F. Alloy 400 Pipe Fittings are available in different types such as Elbow, Bends, Equal & Unequal (reducing) Tees, Equal & Unequal (reducing) Cross, Concentric & Eccentric Reducer, End Pipe Cap, Long & Short Stubends, Seamless Butt weld pipe fittings, Welded Butt weld pipe fittings, and more.
The Monel 400 alloy has many excellent mechanical properties, making it famous in pipe fittings. The Monel 400 Pipe Fittings can give high performance. It is an alloy of nickel and copper, with a small amount of iron, manganese, carbon, and silicon content. The chemical composition of the Alloy 400 Pipe Fittings results in its high strength. Specialized Monel Fittings Manufacturer In India also concentrates on manufacturing high quality of these pipe fittings due to its high demand in various industries- its resistance towards acids and alkalis are the main reason behind that. The Alloy 400 Buttweld Elbow also possesses good ductility, thermal conductivity, and they can only be hardened by cold-working.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A860 MSS SP 75 WPHY 52 Fittings are generally used at High Pressure requirements.Our wide range of Grade WPHY 52 Pipe Fittings includes: WPHY Gr 52 Bend, Elbow WPHY 52 in 45/90 degree, WPHY Grade 52 Tees, Carbon Steel WPHY 52 U Bend, MSS SP75 WPHY Gr 52 Stubends & ASTM A860 WPHY Grade 52 Pipe Nipple.

ASTM A403 WP316 is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304, particularly higher resistance to pitting and crevice corrosion in chloride environments.

317L offers higher creep, stress-to-rupture, and tensile strength at elevated temperatures than conventional stainless steels. It is a low carbon grade which provides resistance to sensitization during welding and other thermal processes.

Super duplex UNS S32750 Buttweld Fittings has a low carbon content which lowers the risk of carbide precipitation in the grain boundaries during the heat treatment. They are highly resistant to crevice corrosion due to high chromium and molybdenum content of UNS S32750 Super Duplex Pipe Fittings makes it extremely resistant to uniform corrosion by organic acids such as formic and acetic acid.

ASTM A234 WPB Pipe Fittings belong to a group of pipes and fittings that are intended for moderate to high temperature services with pressure piping. The A234 is the specification for the moderate to high temperature services where the WPB stands for grade B pressure and weldable pipes.

There are the pressure grade ASTM A234 WPB Pipe Fittings in ? inches to 24 inches nominal bore sizes with different wall thicknesses that correspond to the schedules.It does not cover cast welding fittings which refered standards are ASTM A216/A216M and A217/217M.

The alloy has great mechanical properties at subzero temperatures.For catering to the needs of our customers better, it is essential that we manufacture Monel Pipe Fittings in different types, with each one serving some specific purpose.

These A234 WPB B16.9 Elbows are used in pipe system construction. We are manufacturing ASTM A234 WPB Elbow from pipes using “mandrel” method which allows the pipe to expand and bend simultaneously.