nickel alloy Hastelloy B2 N10665 pipes with flanges

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Alloy B2 should not be used at temperatures between 1000¡ãF and 1600¡ãF as the alloy forms secondary phases that could decrease the ductility of the material.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Hastelloy C-4 is a nickel-chromium-molybdenum alloy with outstanding high temperature stability. It has high ductility and corrosion resistance. It’s high temperature resistance up to 1900 ¡ãF (1038 ¡ãC) makes it suitable for most chemical process application in the “as” welded condition.
Like other nickel alloys, it is ductile, easy to form and weld, and possesses exceptional resistance to stress corrosion cracking in chloride-bearing solutions (a form of degradation to
which the austenitic stainless steels are prone). With its high chromium and molybdenum
contents, it is able to withstand both oxidizing and non-oxidizing acids, and is resistant to
pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy C276 boards can be easily welded using the most traditional processes. In general, 2.4819 Hastelloy C276 Coil does not require post weld heat treatment. Brushing these boards with stainless steel wire after the welding operation usually removes the hot color and likewise creates surface areas that do not require additional pickling.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Hastelloy C-276 is easily fabricated by welding, using methods similar to those used for nickel-based alloys.

Hastelloy C276 plates are referred to as excessive-alloy steels, which have superb corrosion resistance in assessment with different steels as they include greater chromium.

The high molybdenum content of Hastelloy?* C276 provides the alloy with its excellent resistance to pitting and crevice corrosion.

Alloy B Its popularity has been hindered by its availability. All of these materials are good against reducing acids, but very hard against oxidizing acids. Due to the high molybdenum content, this alloy is relatively expensive than other alloys. At the same time, it has excellent corrosion resistance to medium-concentrated sulfuric acid and various non-oxidizing acids, good resistance to chloride stress corrosion cracking (SCC), and good resistance to various organic acids.

Hastelloy C22, also known as Alloy C22, is a general purpose austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. High chromium content provides good oxidation resistance, while molybdenum and tungsten content provides good reduction resistance. Hastelloy C22 alloy also has excellent resistance to oxidizing aqueous media, including wet chlorine and nitric acid-containing mixtures or oxidizing acids containing chloride ions.

Today, Alloy B2 with restricted chemistry can be used in the welded condition and is less susceptible to SCC under many conditions. As always, care must taken in selecting the right alloy for the desired application.

Hastelloy B3 Socket Weld Flanges is dual-certified to meet both SS 316 and SS 316L.

Hastelloy Nickel Alloy B2 is a very chemically resistant alloy with high resistance to pitting and stress corrosion cracking in the heat affected zone.

Forgings are made by forcing materials into customized shapes either by the force of a falling ram upon an anvil or by a die press enclosing a piece of metal and squeeze-forming the part. Forging is a manufacturing process involving the shaping of metal using localized compressive forces.

As with most piping considerations, understanding the ideal uses for bent pipe in your design or project is essential to the proper operation of the finished system.

Alloy B (UNS N10001) was developed to resist hydrochloric acid. Hastelloy B2 has replaced it. Alloy B3 (UNS N10675) is a newer variant with higher thermal stability. These alloy B2 bolts are a wrought nickel molybdenum alloy that can be used in the as-welded condition. It is highly resistant to hydrochloric acid of all concentrations and temperatures. Known as UNS N10665 bolts, these bolts are also resistant to stress corrosion cracking and pitting.

HASTELLOY(r) C276 is solution heat treated at 1121¡ãC (2050¡ãF) and then rapidly quenched. In the case of forging or hot forming, parts should be solution heat treated prior to use.

They have good creep and oxidation resistance. Strengthening of super alloys is performed by solid-solution hardening, work hardening, and precipitation hardening methods.

The premium composition of molybdenum and nickel content of c276 is used to make nickel steel alloys. It helps resist crevice and pitting corrosion in reducing environments. Chromium, on the other hand, is used to impart resistance to oxidizing media.

This nickel steel alloy can be used in the as-welded condition because it resists the formation of grain-boundary carbide precipitates in the weld heat-affected zone.

A bushing is a type of bearing. Generally speaking, “bearings” facilitate movement between two components while reducing friction. Simple in design, a typical bearing has two surfaces that roll against each other, allowing the two mating parts to move without friction.

Hastelloy C276 ASTM Standard B575 Plate is a nickel-molybdenum-chromium superalloy with an enhancement of tungsten made to have superb deterioration.Alloy C276 nickel alloy plate is one of the premier corrosion resistant materials that performs exceptionally well in both oxidizing and reducing environments. It resists chloride stress corrosion cracking, pitting, crevice and general corrosion.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Hastelloy C276 is known for its excellent corrosion resistance in a variety of corrosive media. It includes chloride ions, sulfur compounds, etc. In addition, this alloy has excellent resistance to crevice corrosion, pitting corrosion and stress corrosion cracking. It helps resist the corrosive effects of wet chlorine, chlorine dioxide and hypochlorite. This product is ideal for seawater applications.

Superior resistance to hydrochloric acid, aluminum chloride catalysts and other strongly reducing chemicals. Excellent high-temperature strength in inert and vacuum atmospheres.

Hastelloy C276 is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments.Alloy C-276 is one of the most universally corrosion resistant alloys available today. It is used in a variety of environments ranging from moderately oxidizing to strong reducing conditions. Alloy C-276 has exceptional resistance to sulfuric acid, hydrochloric acid, formic acid, acetic acid, chlorides, solvents, wet chloride gas, hypochlorite and chlorine solutions.

Hastelloy c22/C276 fasteners have good dimensional accuracy, corrosion resistance, durability, high durability, high flexibility, strong structure, high tensile strength and other characteristics. The presence of molybdenum and tungsten provides good resistance to reducing media. The nickel content of Hastelloy c22 fasteners provides admirable resistance to oxidizing aqueous media. These fasting agents also work well wet in environments containing chlorine, formic acid, and acetic acid.

Furnace rolls made of this alloy were still in good condition after operating for 8700 hours at 2150 Deg. F. Furnace trays, used to support heavy loads, have been exposed to temperatures up to 2300 Deg. F. in an oxidizing atmosphere without bending or warping.

Hastelloy C276 flanges are made of a nickel-chromium-molybdenum alloy called Hastelloy. The composition includes 50.99% nickel, 14.5% chromium, 15% molybdenum and carbon, manganese, silicon, sulfur, cobalt, iron and phosphorus. Hastelloy C276 flanges have a high melting point of 1370 degrees Celsius.

The pipes are phosphoric acid, acetic and formic acid resistant. Also, it to various temperature and concentrations is hydrochloric acid resistance.