nickel alloy Hastelloy B3 with flanges

304 Piping Spools are made of 304 Stainless Steel, a common and popular material in many industrial applications that require resistance to corrosion and oxidation. These S30400 Piping Spools are prefabricated using specialized machinery and processes, which ensure that they are highly accurate and reliable.

Steel Pipe Spools are also referred as prefabricated components of a piping system such as pipes, flanges and pipe fittings, and they are mounted during the development before sending them to the manufacture.

Customized Prefabrication Pipe Spools

Pipe welded with Flanges

Pipe welded with Fittings

Flanges welded with Fittings

Pipelines for gathering sour gas have been built with solid (or clad) INCONEL? 625 alloy and used in seawater heat exchangers in refineries, power plants, and offshore topside services that often need this material.

Hastelloy c-22 and c-276 are the only materials resistant to corrosion in wet chlorine, hypochlorite, and chlorine dioxide solutions, with significant resistance to high chloride solutions such as ferric and cupric chlorides. Corrosion resistance.

This nickel steel alloy has good resistance to heat affected and knife-line zone attack. This alloy also bears the brunt of formic, sulfuric, phosphoric, acetic acids and various other non-oxidizing media.

Inconel 718 is a nickel-based superalloy ideal for applications requiring high strength in the temperature range from cryogenic to 1400¡ãF. Inconel 718 also has excellent tensile and impact strength.

The high chromium content promotes and maintains a passive film that protects the material in many corrosive environments.

Reworking of Alloy K-500 is best done while the material is in the annealed or hot worked and quenched condition. However, age hardened materials can be finished to close tolerances and finish. Therefore, the recommended practice is to machine slightly oversize, age harden, and then finish to size.

Process equipment used in the production of chlorinated and fluorinated hydrocarbons.

A fit-up and welding process must be applied after the edge finish of the parts. Therefore, for stainless steel and carbon steel pipe spools, parts can be located onto steel bases or wooden bases. Furthermore, any contact possibility between carbon steel and stainless steel must be minimized.

904L grade stainless steel is unlike any other steel. Due to its extra amounts of chromium, molybdenum, nickel and copper, 904L steel features superior resistance to corrosion, rust and acids.

Little or no attack occurs at room and elevated temperatures in dry gases, such as chlorine or hydrogen chloride. At temperatures up to 550C in these media, this alloy has been shown to be one of the most resistant of the common alloys.

Inconel 625 material has excellent strength and hardness. They have a minimum tensile strength of 120Ksi and a minimum yield strength of 60ksi. In addition to that, they can easily be stretched up to 30% and still have excellent workability.

Inconel 625 alloy is widely used in chemical processing, pollution control, evaporators, nuclear reactors, marine industry and more.

Pipe Spools are fabricated from a number of raw pipes and pipe fittings (e.g. elbows, flanges, tees, etc.) in fabrication shops.

The corrosion resistance of Monel K-500 is basically the same as Alloy 400, except that in the age hardened condition, Alloy K-500 has a greater tendency to stress corrosion cracking in certain environments. Monel K-500 has been found to be resistant to sour gas environments.

The cylindrical bulge eases the use of flange in extreme conditions such as; elevated temperatures or high pressurized atmospheres. These flanges are welded to pipes or fittings by using butt-welding which enables a total fixation of the body. Slip-on flanges are also very common in use because of their low cost. They do not require excessive surface finishing as weld necked flanges.

However, their fatigue strength is higher than the slip-on flanges. A major problem of the socket weld flanges is the corrosion risk. A gap between the flange and fitting or pipe must be maintained before the welding. Corrosive fluids or humidity can locate in these shelters. Thus, this solid-liquid interface may cause corrosion on the body.

The Stainless Steel Fabricated Pipe Spools are useful for the customers in that they do not miss any parts and they eliminate the difficulty of onsite installation.

Stainless steel grade 254 SMO? is a very high end austenitic stainless steel.

Alloy 347 (UNS S34700) is columbium stabilized austenitic stainless steel plate with good general corrosion resistance and somewhat better resistance in strong oxidizing conditions than 321 (UNS S32100).

The following procedure after the marking is the cutting step. The way of cutting differs for various materials. Thus, for carbon steels, the flame cutting method is utilized. Moreover, stainless steel components can be cut using a plasma arc cutting machine. If the plasma arc cutter is used some certain conditions must be maintained.

Monel K-500 combines the excellent corrosion resistance of Monel 400 with the added benefits of higher strength and hardness. Performance can be improved by adding aluminum and titanium to the nickel-copper matrix and by heating under controlled conditions to precipitate submicroscopic particles of Ni 3 (Ti, Al) throughout the matrix.

These connections are embedded inside concrete walls before the pouring of concrete. This system must be aligned properly before concrete pouring because it needs to withstand the weight and force of the structure.

Incoloy Alloy 800 is widely used in equipment that must have high strength and resistance to oxidation, carburisation and other harmful effects of high temperature exposure.

Incoloy 825 is a superalloy with molybdenum and copper added to Incoloy 800. This makes Alloy 825 superior to Alloy 800 in terms of corrosion resistance.

Alloy 625 has excellent fatigue strength and stress corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability and is often used to weld AL-6XN. This alloy is resistant to a variety of severe corrosive environments, especially pitting and crevice corrosion.

Prefabrication is the practice of assembling components of a structure in a workshop or other assembly facility before transporting to site for erection.

The outstanding and versatile corrosion resistance of INCONEL 625 alloy under a wide range of temperatures and pressures is a primary reason for its wide acceptance in the chemical processing field.

The higher molybdenum content of Alloy 317L assures superior general and localized corrosion resistance in most media when compared with 304/304L and 316/316L stainless steels.