nickel alloy pipe fitting best elbow Hastelloy B2 B3 X C22 C2000 C276

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

For applications requiring higher resistance to stress rupture and creep, especially above 1500¡ãF (816¡ãC), use INCOLOY Alloys 800H and 800HT.

304 has good oxidation resistance in intermittent duty up to 870¡ãC and continuous duty up to 925¡ãC. However, continuous use at 425-860¡ãC is not recommended. In this case, 304L is recommended because of its resistance to carbide precipitation.

Both materials remain available, subject to commercial considerations, and certain specifications which restrict the service temperature of some grades of INCOLOY alloy 800H.

The pitting resistance of ASME B16.9 SS 316L fittings is much higher compared to Grade 316. While Alloy 316L can be easily welded by most commonly used processes, Werkstoff Nr. is post weld heat treated.

Hastelloy C2000 pipe fittings is a nickel-chromium-molybdenum alloy. It is most commonly available in wrought forms at the mill level. Hastelloy C2000 can be used in applications requiring high metallurgical stability in reducing or oxidizing atmosphere. It is also sed in chemical process equipment applications.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

At high temperatures in the presence of oxidising agents, the titanium and niobium compositions of the oxide film on Inconel 625 increase drastically to form a natural protective layer in the material.

Butt weld fittings connect with pipe to deliver air, water, natural gas, and oil in plumbing applications and food and dairy processing. Butt weld (BW) fittings form pipe joints with strength, fatigue, corrosion resistance, and temperature compliance.

HT PIPE is highly acclaimed manufacturer of the complete range of Stainless steel 304/ 304L pipe fittings such as SS 304 reducer, SS 304 elbow, SS 304 tee, SS 304 cross, SS 304 stub ends and SS 304 pipe bends.

They exhibit excellent corrosion resistance to a wide range of corrosive environments. Type 304 and 304L grades of stainless steel pipe exhibit good machinability and have excellent weld-ability characteristics with or without the addition of filler metals.This type of steel is extremely durable and is utilized in a wide range of applications and industries.

We manufacture Stainless steel 304/ 304L pipe fittings for end-users such as marine engineering, chemical processing, hydro-carbon processing, heat exchangers, valves and pumps. and ship worldwide.

ncoloy 800H Forgings have good strength and excellent resistance to oxidation, sulfidation and carburization at elevated temperatures.

Alloy Steel Weld Fittings is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. It is mainly used small pipe diameters generally for piping whose nominal diameter is NPS 2 or smaller. Its tensile strength of is between 758-1882 MPa which is higher than the tensile strength of stainless steel.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Alloy 410, is the essential, general purpose martensite stainless steel that¡¯s used for very stressed elements and provides sensible corrosion resistance, and a high strength and hardness. Alloy 410, contains a minimum of 11 .5% metal that¡¯s simply adequate to demonstrate corrosion resistance properties in delicate atmospheres, steam, and much of delicate chemical environments.

After hot working, anneal the tube by heat to 1725 and 1850 for at least half an hour to match the inch thickness observed by water quench. Intergranular corrosion (IGC) in pipe fittings, also known as intergranular corrosion (IGA), is a form of corrosion in which the crystallite boundaries of fabrics are particularly susceptible to corrosion. UNS S30403 fittings can be properly hot formed with forces very similar to those required to pass through austenitic steels.

ASTM A234 carbon steel pipe fitting grade, alloy steel pipe fittings are made of chromium, molybdenum, nickel alloy, Hastelloy, Monel, Inconel and other alloy elements, with higher pressure rating, better strength, good corrosion resistance resistance and longer durability. Widely used in oil and gas pipelines, chemical industry, power plants, nuclear power plants, servers and other fields.

Copper Nickel Fittings are also known as Curpo Nickel Fittings (Cu-Ni Fittings), Copper Nickel C71500 (70/30) and UNS C70600 (90/10) Fittings. Simplex offers a full line of copper pipe fittings such as copper-nickel UNS C71500 elbows, copper-nickel (Cu-Ni) 70/30 reducers, copper-nickel tees, copper-nickel stub ends, copper-nickel elbows and copper-nickel crosses .

HT PIPE is one of the leading manufacturers of different types of high-quality products, such as pipe fittings of different shapes, sizes, thicknesses, etc. On the other hand, we are also a major supplier and exporter of the popular product duplex steel UNS S31803 pipe fittings. Pipe fittings are manufactured to all national and international standards of our organization. There are many kinds of pipe fittings, which are widely used in piping systems for various purposes. They are both used to mount profiled pipes to each other. In this way, liquids, fluids, gases, etc. pass through the pipes without any leakage. Also, fittings come in many sizes, sizes, standards, alloys, grades, etc., but most importantly our Duplex 1.4462 fittings are the most demanded fittings on the market today and for many years.

Traditionally, duplex steels have a chromium content of about 22% by weight. Likewise, stainless grade 2205 is a duplex stainless steel with 22% chromium in the alloy. The higher chromium content in Duplex 2205 fittings provides several benefits, including higher yield strength, better mechanical properties, and excellent corrosion resistance.

They can be furnished in accordance with a variety of ASME and MSS standards.

310S stainless steel has good high temperature resistance. When the temperature exceeds 800 [1], it begins to soften, and the allowable stress begins to decrease continuously. The maximum operating temperature is 1200 ¡ãC. Due to the high content of nickel (Ni) and chromium (Cr), it has good oxidation resistance, corrosion resistance, acid and alkali resistance, and high temperature resistance. After the content, the strength is improved due to its solid solution strengthening effect. The chemical composition characteristics of austenitic stainless steel are based on chromium and nickel with elements such as molybdenum, tungsten, niobium and titanium added. Therefore, it has high strength and creep strength at high temperature.

We also produce Carbon Steel ASTM A234 WPB Threaded elbows with all male connections, all female or a combination of each.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Titanium has rather low thermal and electrical conductivity compared to other metals, although it exhibits superconducting properties when cooled below the 0.49 K temperature (its critical temperature).

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

Hastelloy X pipe bend is widely used for a variety of chemical processing parts, including retorts, pyrolysis tubing, and muffles due to its exceptional resistance to stress-corrosion cracking.

Hastelloy X pipe bend is corrosion resistant, heat resistant and oxidation resistant, being able to withstand reducing or neutral atmospheres and oxidation.