Nickel-chromium-molybdenum Hastelloy C276 Bushing

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

HASTELLOY C-276 alloy has excellent resistance to a variety of chemical process environments, including strong oxidizing agents such as ferric and copper chlorides, hot fouling media (organic and inorganic), chlorine, formic and acetic acids, acetic anhydride, and Seawater and brine solutions. It can be used in flue gas desulfurization systems due to its excellent resistance to sulfur compounds and chloride ions in most scrubbers.

Hastelloy B3 Blind Flanges have good creep, and oxidation¡¯s resistance. Hastelloy B3 Weld Neck Flanges isn¡¯t recommended for use in the presence of ferric or cupric mariners because these mariners can bring unseasonable failure.

Alloy C22 is a nickel-chromium-molybdenum solid solution strengthened super-alloy with a nominal chemical composition of 56% nickel, 22% chromium, and 13% molybdenum, with additions of iron, tungsten, and cobalt.

Alloy B (UNS N10001) was developed to resist hydrochloric acid. Hastelloy B2 has replaced it. Alloy B3 (UNS N10675) is a newer variant with higher thermal stability. These alloy B2 bolts are a wrought nickel molybdenum alloy that can be used in the as-welded condition. It is highly resistant to hydrochloric acid of all concentrations and temperatures. Known as UNS N10665 bolts, these bolts are also resistant to stress corrosion cracking and pitting.

Super alloys are also known as high performance alloys. They contain many elements in a variety of combinations designed to provide unique material properties for specific applications.

Hastelloy C276 is a nickel-chromium-molybdenum wrought alloy considered to be the most versatile corrosion-resistant alloy known. This alloy is resistant to grain boundary deposits in the weld heat affected zone, making it suitable for most chemical process applications in the as-welded condition. Meanwhile, Hastelloy C276 fasteners are considered to be the most versatile and high-strength fasteners, finding their suitability in many industrial applications. These are nickel-molybdenum-chromium forged alloy fasteners that perform well in a variety of harsh environments. The presence of molybdenum and chromium content makes nickel alloy steel more resistant to crevice and pitting corrosion. Hastelloy c276 bolts are the highest quality bolts in the alloy series. These are corrosion resistant, which is important for the industries in which Hastelloy is best suited.

Hastelloy B2 is a nickel-molybdenum alloy with significant resistance to reducing environments such as hydrogen chloride gas and sulfuric, acetic and phosphoric acids. Hastelloy B2 is resistant to pure sulfuric acid and many non-oxidizing acids. This alloy should not be used in the presence of oxidative contaminants in oxidizing or reducing media. Premature failure may occur if Alloy B2 is used in the presence of iron or copper in systems containing hydrochloric acid.

The Hastelloy c276 Sheet Plate is the sheet plates made of Hastelloy of grade C276.

Alloy X pipe bend is equally suitable for use in jet engine tailpipes, afterburner components, turbine blades, nozzle vanes, cabin heaters, and other aircraft parts.

Hastelloy C276 has excellent resistance to pitting, acid, crevice corrosion, and also in reducing the environment. This alloy is most widely used in many industrial applications because of its excellent qualities and features.

Hastelloy is a term used to describe nickel metal that has been alloyed to increase corrosion resistance. This is primarily done through the addition of molybdenum and chromium.It is commonly used for pipes and valves in the chemical and petrochemical industries. It is also used in reactor vessels in the chemical and nuclear industries.

Hastelloy C22, also known as Alloy C22, is a general purpose austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. High chromium content provides good oxidation resistance, while molybdenum and tungsten content provides good reduction resistance. Hastelloy C22 alloy also has excellent resistance to oxidizing aqueous media, including wet chlorine and nitric acid-containing mixtures or oxidizing acids containing chloride ions.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications.Nickel Pipe is a metal pipe that is made up of an alloy that has primarily nickel and other elements in its composition.

Hastelloy C276 is an extremely versatile material that has been used in a variety of harsh environments. It exhibits corrosion resistance to chloride-containing media, organic acids, oxidizing media, reducing acids, seawater and brine, and sulphur-containing flue gas. Hastelloy C276 replaces Alloy C (UNS N10002), which has slightly lower chromium and molybdenum contents. The high nickel, molybdenum and tungsten contents make them expensive compared to austenitic stainless steels. It is by far the most popular super alloy.

Although there are several variants of Hastelloy nickel alloys, Hastelloy C-276 is by far the most widely used.

Prefabricated steel s as the name itself sounds, is made of pre engineered steel. Fabrication is done in controlled environment inside the factory and then sent to client location for assembly.

Hastelloy C-276 fasteners and other products in the Hastelloy family have excellent resistance to corrosion and oxidizing and reducing chemicals. Due to its adaptability, Hastelloy C-276 alloy can be used in problem areas and is more likely to occur in process areas. In Hastelloy C276 hex bolts, the chromium content is increased to about 21% and the molybdenum content is reduced to about 13%. Hastelloy C276 Heavy Duty Hex Bolts also provide optimum resistance to environments encountered in reducing and oxidizing conditions in the process stream.

The sheer variety of pipe bend sizes and materials also make them suitable for routing everything from hot or caustic liquids to maintaining pressure and movement in high viscosity liquids or those with suspended solids, such as Oil Sands slurry lines which contains a high concentration of silica sand.

Hastelloy C-276 also has exceptional resistance to pitting, stress-corrosion cracking and oxidizing atmospheres, as well as excellent resistance to multiple different chemical environments.

The Hastelloy C276 round tube is manufactured from a high temperature heat resistant alloy, which contributes to its widespread use in the power industry. Whereas, Hastelloy C276 pipe exhibits outstanding properties such as high wear resistance, corrosion resistance and longer service life due to the raw materials used in its processing.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

There are different sizes according to different standards of ASTM B574 UNS N10276 Fasteners. Hastelloy C276 alloy is very easy to manufacture and does not require heat treatment after welding. Hastelloy C276 alloy excels in many industrial applications (i.e. chemical processing).

Hastelloy C-276 is easily fabricated by welding, using methods similar to those used for nickel-based alloys.

HASTELLOY(r) C276 is solution heat treated at 1121¡ãC (2050¡ãF) and then rapidly quenched. In the case of forging or hot forming, parts should be solution heat treated prior to use.

Hastelloy C276 bushings are widely used in the harshest environments such as chemical processing, pollution control, pulp and paper, industrial and municipal waste treatment, and recovery of sour natural gas.

In the case of Hastelloy-C276, the corrosion product was primarily a protective chromium oxide scale, although slightly thicker regions of the same oxide formed at the site of microcracks on the metal surface. Very little carburization was observed in this alloy before exposure for at least 1000 hours.

Our Hastelloy B2 Lap Joint Flanges are also being offered in customized sizes and shapes to our customers. The extremely low carbon and silicon content of these Hastelloy B2 Socket Weld Flanges reduces precipitation of carbides and other phases in the heat ¨C affected zone of welds and ensures adequate corrosion resistance even in the welded condition.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Hastelloy C276 thin wall tubing is commonly used in marine, aerospace, chemical processing, nuclear reactors, pollution control equipment, and more.

Alloy X pipe bend is one of the most widely used nickel base superalloys for gas turbine engine components.