Nimonic 80A 2.4631 2.4952 hex nut heavy hex nut DIN934 price

HASTELLOY(r) C276 is solution heat treated at 1121¡ãC (2050¡ãF) and then rapidly quenched. In the case of forging or hot forming, parts should be solution heat treated prior to use.

Stronger than 400, alloy K500 washer even retains this strength in corrosive. conditions, resisting both pure and salt water, as well as non-oxidizing mineral acids, salts, alkalis, and sour gas.

It can be used in flue gas desulfurization systems due to its excellent resistance to sulfur compounds and chloride ions in most scrubbers.

718 bolts also has strong resistance to hydrogen embrittlement and stress corrosion cracking. Bolts of Inconel 718 are used for landing nipples, polished hole sockets in sour gas service, and side pockets or hangers. In addition, it is used in high-strength machines or tools in marine applications.

Its high nickel content, a minimum of Ni 72%, combined with its chromium content, provides users of Nickel Alloy 600 a number of benefits such as good oxidation resistance at high temperatures and corrosion resistance to both organic and inorganic compounds.

Unlike chrome-nickel steel, this steel does not reduce corrosion resistance due to carbide precipitation. Inconel WNR 2.4668 Nuts are used in excellent procedures including welding materials to more or less materials of the same chemical composition, this is used in the manufacture of tools for the management of sulfuric and phosphoric acids.

Inconel 625 is a nickel-based super alloy with high strength properties and resistance to corrosion, including H2S and CO2, and elevated temperatures.

Under alternating oxidizing and reducing conditions the alloy may suffer from selective oxidation.

Hastelloy B3 fasteners are an excellent choice for bolting applications in chemical processing units because the alloy has excellent resistance to hydrochloric and sulfuric acids, while maintaining mechanical strength at elevated temperatures. HT PIPE offers all types of bolts, screws, studs, threaded rods, nuts, washers and custom bolts in Hastelloy B3.

Applications in air pollution control include stack liners, ducts, dampers, scrubbers, stack-gas re-heaters, fans and fan housings.

Monel nuts are often used for standard and advanced applications where high levels of strength and superior corrosion resistance is nearly always required. Monel 500¡¯s premium corrosion resistance, strength and usability in extreme conditions makes it the ideal choice for a wide range of industrial applications.

Monel K500 nuts will retain their strength to 1200¡ãF and even retain their ductility as low as -400¡ãF.

There are different sizes according to different standards of ASTM B574 UNS N10276 Fasteners. Hastelloy C276 alloy is very easy to manufacture and does not require heat treatment after welding. Hastelloy C276 alloy excels in many industrial applications (i.e. chemical processing).

INCONEL 625 is used in offshore and aerospace industries, but also in pollution control equipment.

Hastelloy c22/C276 fasteners have good dimensional accuracy, corrosion resistance, durability, high durability, high flexibility, strong structure, high tensile strength and other characteristics. The presence of molybdenum and tungsten provides good resistance to reducing media. The nickel content of Hastelloy c22 fasteners provides admirable resistance to oxidizing aqueous media. These fasting agents also work well wet in environments containing chlorine, formic acid, and acetic acid.

Nimonic 80 a (Alloy 80A) is one of the most popular superalloys specified for gas turbines. Nimonic 80A fasteners are often specified because of their ability to withstand very high temperatures. This makes Nimonic bolts and nuts ideal for use in aircraft parts and custom-designed gas turbine components, from turbine blade mounting to exhaust nozzles on jet engines, where Nimonic fasteners are exposed to very high levels of pressure and heat.

Monel 400 es una de las pocas aleaciones que conserva la resistencia a temperaturas bajo cero, asi que utilicela en estas situaciones.

Hastelloy fasteners can be used in applications involving a wide range of media, including reducing acids and oxidizing agents. As the most versatile alloy c276 fastener, it is most commonly used for bolting of all Hastelloy grade fasteners.

Alloy 20 washers provide good performance in hot sulfuric acid, specifically they offer good resistance to stress-corrosion cracking in boiling sulfuric acid at specific range of 20% to 40% concentration, as well as general sulfuric acid resistance. Alloy 20 offers solid acid protection and will perform better than Duplex or even Monel, but for high temperature and high concentration acids, you may need to look to Inconel or Hastelloy fasteners. In addition, Alloy 20 washers also show useful resistance to phosphoric acid and nitric acid.

Hastelloy B2 fasteners are primarily used for excellent resistance to reducing environments such as hydrogen chloride gas, sulfuric acid, acetic acid and phosphoric acid. Like other Hastelloys, B2 fasteners can be used in the as-welded condition because they resist the formation of grain boundary carbide deposits in the weld heat-affected zone. Due to reduced ductility, B2 fasteners are not recommended for use between 1000¡ãF and 1600¡ãF.

This nickel 2.4816 bolt is inherently non-magnetic. Inconel 600 Nuts and Bolts have excellent mechanical properties, offering buyers an advantageous combination of high strength and good weldability over a wide temperature range. The high nickel content in Inconel 600 screws allows them to maintain considerable resistance under reducing conditions. The nickel content in Alloy 600 bolts makes the fastener resistant to corrosion by a variety of organic and inorganic compounds. For example, Inconel 600 bolts have excellent resistance to chloride stress-related corrosion cracking, while also exhibiting excellent resistance to alkaline solutions.

Hastelloy B-3 is a nickel-molybdenum alloy with excellent resistance to pitting, corrosion and stress corrosion cracking and better thermal stability than alloy B-2. Hastelloy UNS N10675 fasteners are suitable for aircraft, furnace and chemical process components, honeycomb and gas turbine combustion section components.

Corrosion rates are generally accelerated in aqueous media. However, due to the alloy’s strong nickel and chromium chemical base, the corrosion rate of nickel alloy 601 hex bolts is much lower.

Monel 400 Bolts and Nuts are made from a nickel-copper alloy for extreme corrosion resistance, especially in sour conditions. The material is also strong and rigid and can be used to produce bolts and nuts for high temperature service. HT PIPE is a leading manufacturer and supplier of Monel 400 Bolts and Nuts of all sizes and types. Among the ingredients are carbon, aluminum, manganese, silicon, iron, sulfur and 63% nickel and 28% copper. This composition gives the material a high melting point.

Inconel 625 hex bolts are used in a variety of corrosive environments. In sea water applications, Inconel 625 hex bolts remain free from pitting and crevice corrosion. This makes it ideal for marine, submarine and Navy applications. Additionally, Inconel 625 hex bolts can be used in a variety of extreme conditions from heat shields to marine applications.

Nimonic 80a Nuts are low creep superalloy fasteners made from alloys containing over 50% nickel, 20% chromium, and additions of titanium and aluminum. Nimonic Alloy 80a fasteners can withstand very high temperatures.

Monel K500 Flat Washers feature aluminum and titanium elements for the excellent corrosion resistance of Alloy 400; improved strength, hardness, erosion resistance and oxidation fatigue resistance. We manufacture all types of Monel K500 machined washers in virtually all shapes and sizes.

Monel 400 bolts can also be used at higher temperatures. While Monel 400 bolts are typically used at elevated temperatures, they retain their mechanical properties at sub-zero temperatures. The increased hardness at freezing temperatures has been shown to only slightly impair the ductility or impact resistance of Monel 400 bolts. Even when cooled to the temperature of liquid hydrogen, Monel 400 will not undergo the ductile to brittle transition that can lead to fracture. This is especially unique compared to most ferrous materials, which are generally stronger but very brittle at extreme low temperatures.

Monel 400 or also known as Nickel 400 is a solid solution alloy that is a high strength material that can be used over a wide temperature range. It also has excellent corrosion resistance and has applications in many areas in marine and chemical processing. It is used in applications such as valves, pumps, fresh water tanks and propeller shafts.