Nimonic 80A 90 nickel alloy flat plain washer DIN125

Increased temperatures have prompted many of our customers to use superalloy Inconel 718 forged rings. Since Inconel uses nickel as its primary alloying agent, the use of Inconel 718 fasteners at elevated temperatures has no negative effect on the application or the equipment being used.

Din 931 indicates partially threaded hex head cap screw ¨C The DIN 931 standard will specify the thread tolerance. ? M16; diameter in mm (16 mm) ? In the metric system, all fasteners are assumed coarse thread unless another thread pitch is stated.

Therefore, they can be used in chemical acid production plants and food production plants. There are different types such as ASTM F2281 UNS N02200 Ni 200 screws, hex bolts, socket head cap screws, hex nuts, washers, screws, studs and U-bolts. Fastener specification is ASTM B160. 2.4066 Nickel 200 Stud Bolts are composed of up to 99% Nickel, Copper, Iron, Manganese, Carbon, Silicon and Sulfur. ASTM F2281 nickel alloy bolts are expensive, but they are useful in sensitive applications that are susceptible to corrosion. The cost of fasteners is not as important as some chemical processing and food production applications. Nickel 200 UNS N02200 Hex Nuts are one of the most commonly used fasteners due to head geometry and high torque capability.

Monel K500 bolts and nuts are used in a variety of industries due to their high temperature resistance, high corrosion resistance and durability. It is a nickel-copper alloy with a composition of 63% nickel and 27% copper, among other elements.

Inconel 718 Nuts, also known as Alloy 718, are a precipitation hardening (also known as age hardening) form of Inconel 625. This heating and quenching process is used to change the atomic structure of the alloy, making it stronger by locking the metal’s grain structure in place. Additional strength can be obtained by cold working.

Hastelloy B3 fasteners offer the same excellent resistance to hydrochloric acid and other strong reducing chemicals as other B alloys, including B2, but with significantly enhanced thermal stability and easier fabrication. In addition, B3 fasteners are highly resistant to attack from cut lines and heat affected zones. Like B2 alloys, B3 fasteners are not recommended for use in the presence of iron or copper salts that can cause rapid corrosion failure.

Alloy 20 is designed to withstand sulfuric acid. Its nickel, chromium, molybdenum and copper content all provide excellent general corrosion resistance. Alloy 20 fasteners are austenitic stainless steel fasteners made from alloys containing limited carbon content of chromium, nickel, molybdenum, and nitrogen.

This nickel 2.4816 bolt is inherently non-magnetic. Inconel 600 Nuts and Bolts have excellent mechanical properties, offering buyers an advantageous combination of high strength and good weldability over a wide temperature range. The high nickel content in Inconel 600 screws allows them to maintain considerable resistance under reducing conditions. The nickel content in Alloy 600 bolts makes the fastener resistant to corrosion by a variety of organic and inorganic compounds. For example, Inconel 600 bolts have excellent resistance to chloride stress-related corrosion cracking, while also exhibiting excellent resistance to alkaline solutions.

Incoloy 800, 800H and 800HT bolts are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization at high temperature exposure. Incoloy 800H fasteners and Incoloy 800HT fastener alloys are mainly high in nickel and chromium. Meanwhile, Inconel 800H/800HT? (UNS N08810 & N08811 / W.Nr. 1.4958 & 1.4959) is a solution-strengthened iron-nickel-chromium alloy usually offered as a dual-certified alloy that meets the elemental requirements of both alloys.

Inconel is used in aerospace applications as well as marine applications. Common applications for this alloy are springs, seals, bellows for submerged controls, electrical cable connectors, fasteners, flexure devices, and oceanographic instrument components.

Alloy 20 bolts are made from nichrome with a composition of 32.5% nickel, 19% chromium, carbon, copper, molybdenum, manganese, silicon, columbium and iron. Alloy 20 is a nickel-chromium-molybdenum stainless steel alloy developed for applications involving sulfuric acid. Its corrosion resistance also finds other uses in the chemical, food, pharmaceutical and plastics industries. Alloy 20 resists pitting and chloride corrosion, and its copper content protects it from sulfuric acid. Alloy 20 is not SS, but a nickel alloy (ASTM).

Inconel Alloy 718 is an alloy containing high amounts of nickel, chromium and molybdenum. It is one of the most popular nickel-based superalloys and is widely used for its excellent resistance to corrosive environments such as crevice and pitting corrosion.

Alloy 926 (1.4529) screws are the perfect replacement for 316L when higher corrosion resistance is required without increased strength. Alloy 926 fasteners are considered a 6-molybdenum alloy (6-molybdenum or 6% molybdenum), similar to sister alloys AL6XN and SMO 254. In the stainless steel category, these 6 molybdenum alloys are considered very corrosion resistant.

For high temperature applications up to 1,000 ¡ãC (1,832 ¡ãF), the solution treated variant (grade 2) acc. to ASME Code for Pressure Vessels is used.

Inconel 625 bolts are primarily used in circulating cooling and heating applications. They can be used in resistance welding applications. Bolts are used in engine casings, honeycomb structures and hydraulic lines. HT PIPE is a leading manufacturer and supplier of Inconel 625 Bolts in different types and sizes. The material is resistant to crevice and pitting corrosion.

Alloy 80A has good corrosion and oxidation resistance and high tensile and creep rupture properties at temperatures up to 815oC (1500oF). Microstructure evolution of Ni-based superalloy Nimonic 80a during hot forging. The applicability of this alloy for hot forging under non-isothermal conditions in a screw press is discussed from the aspects of deformation inhomogeneity, flow localization and shear band formation.

Hastelloy C-276 also has exceptional resistance to pitting, stress-corrosion cracking and oxidizing atmospheres, as well as excellent resistance to multiple different chemical environments.

Monel K500 Fasteners are precipitation hardenable nickel and copper base alloy fasteners. These fasteners are developed for the excellent corrosion resistance adding with benefits of great hardness and strength.

Inconel 625 Bolts were developed in the 1960s as a vapor-lined piping material to provide high strength even in extreme high temperatures ranging from freezing low temperatures to 1800¡ãF. Inconel 625 Bolts, also known as Alloy 625, are known for their amazing ability to maintain strength and heat resistance in and out of corrosive environments.

It has a higher melting point around 2400 degrees Fahrenheit to 2460 degrees Fahrenheit. Primarily Monel K500 grade is a spark resistant alloy. This becomes non-magnetic below -200 degrees Fahrenheit. In terms of cold working operations, magnetic structures can be achieved. The Monel nickel-copper composition of Monel 500 is highly resistant to corrosion, making it ideal for many types of industrial applications that require extreme environmental protection, such as salt water and strongly acidic conditions.

The Alloy K500 Studs are threaded rods with threads on both ends. They can be different types depending on the threaded distance from the center and the thread type. The material is high temperature and high pressure resistant. It has 1350 degrees Celsius melting point, 790MPa minimum yield strength and 1100MPa minimum tensile strength. These values are double the strength of 304 grade.

The composition of Monel K500 fasteners includes carbon, 2.3% aluminum, manganese, silicon, iron, sulfur and titanium in addition to nickel and copper. It is this unique composition that gives the material its superior strength, extreme corrosion resistance and ductility. Applications for these fasteners include the offshore petroleum industry, power plant applications, petrochemicals, gas handling units, specialty chemicals, and more.

Hastelloy X Bolts have been widely used in combustion zone components of turbine engines such as transition ducts, combustion chambers, booms and flame holders, as well as afterburners, exhaust pipes and cabin heaters. This alloy is recommended for industrial furnace applications due to its unusual resistance to oxidation, reduction and neutral atmosphere.

Nimonic 80 a (Alloy 80A) is one of the most popular superalloys specified for gas turbines. Nimonic 80A fasteners are often specified because of their ability to withstand very high temperatures. This makes Nimonic bolts and nuts ideal for use in aircraft parts and custom-designed gas turbine components, from turbine blade mounting to exhaust nozzles on jet engines, where Nimonic fasteners are exposed to very high levels of pressure and heat.

Alloy 718 fasteners are a major hardware element almost everywhere, whether it’s home appliances, machinery, automobiles, buildings, infrastructure, or any other item that needs to be assembled, there will definitely be fasteners to hold them all together.

The low carbon minimizes carbide precipitation during welding to maintain resistance to intergranular attack in heat-affected zones of welded joints.

In Hastelloy C276 hex bolts, the chromium content is increased to about 21% and the molybdenum content is reduced to about 13%. Hastelloy C276 Heavy Duty Hex Bolts also provide optimum resistance to environments encountered in reducing and oxidizing conditions in the process stream. Due to the use of experienced qualified professionals and the latest technological machinery.

Alloy 825 bolts have good mechanical properties from low temperatures to moderately high temperatures up to about 1000¡ãF. Microstructural changes that significantly reduce ductility and impact strength occur when used at temperatures above 1000¡ãF.

INCONEL alloy C-276 is designated as UNS N10276 and Werkstoff Nr. 2.4819. It is listed in NACE MR0175 for oil and gas service.

Due to the alloy’s good corrosion resistance, Inconel 718 Hex Head Bolts have been used in food processing equipment, caustic solutions, and general corrosion resistant parts and structures.