one-eighth nickel alloy 304 pipe butt weld fittings ASTM B366 UNS N10665WPHB-2CR HB2 tee

Monel 400? is a nickel-copper alloy that is hardened by cold working only. The various types of available fittings are Monel Stub end, Monel Reducer, Monel End Cap Fittings, Monel tee, etc.

These elbows provide good service in harsh environments. The elbow is used to change the flow direction of the medium by 30 degrees.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

321 stainless steel, also known as UNS S32100 and Grade 321, is primarily comprised of 17% to 19% chromium, 12% nickel, .25% to 1% silicon, 2% maximum manganese, traces of phosphorus and sulfur, 5 x (c + n) .70% titanium, with the balance being iron. With regards to corrosion resistance, 321 Stainless Steel is equivalent to Grade 304 in the annealed condition and is superior if the application involves service in the 797¡ã to 1652¡ã F range. 321 Stainless Steel combines high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion.
UNS S32100 Reducing Tee is preferred due to its ability to work in high pressure and temperature even at a higher temperature.
Stainless Steel 321 / 321H Pipe Fittings are used in filtration, refrigeration, oil, gas, petrochemical and in offshore oil drilling industries. The material has chromium, nickel, titanium and other elements along with carbon. The 321H has higher carbon than the other versions. There are different types of fittings such as the 321/321H Stainless Steel Buttweld Fittings which are most commonly used but there are also the seamless fittings. The Stainless Steel UNS S32100 Pipe Elbow is a fitting type that is used in high temperature applications to change direction of flow.

ALLOY400 is a single-phase solid-solution Ni-Cu alloy with excellent corrosion resistance to a wide range of media.

ASME B16.9 Duplex Stainless Steel Seamless Fittings range from sch5 to sch160 and XXS. Welded fittings with wall thicknesses up to 50 mm. Because the duplex material is strong and resistant to acid and chloride ion corrosion, fittings such as ASTM A815 UNS S32205 Long Radius Elbow are used in seawater, marine and highly corrosive applications such as the oil, oil and gas and offshore oil drilling industries.

We have been a leading manufacturer and supplier of Duplex 2205 Fittings for the past ten years. Our goal is to produce the best product for everyone at the most reasonable price.

UNS S31600 material is considered a marine grade pipe and is designed without any welds or seams. The grade performs well in different aqueous media and shows resistance to pitting corrosion by chlorides and any contaminants. The superior chemistry of this grade prevents long-term plumbing in water bodies. However, marine-grade pipelines are susceptible to warm waters.

They can operate in a temperature range of 450¡ãC to 850¡ãC. They can also be customized to specific requirements and have passed various tests to confirm maintaining the performance of this SS 316L eccentric reducer.

We warmly welcome our regular and new clients to join us for ASTM Seamless Tee B366 (WP20CB, UNS N08020, Alloy20).

These A234 WP9 Alloy Steel Reducer are relevant to use in low-pressure product flow services, however, their working pressure can vary depending upon the pipe’s built.This is because of the decreased inclination to accelerate malicious inter-metallic stages in these Alloy Steel WP9 Stub End, subsequently, bearing it more noteworthy flexibility than different alloys amid and following different thermal cycling conditions.

The schedules of the fittings range from 5s to XXS.Fittings over NPS12, produced by locally heating a portion of the fitting stock to any temperature for forming, shall be annealed, normalized, or normalized and tempered. And these fittings inlcudes elbow, tee, reducers, the carbon content shall les than 0.26%. NPS12 under no need to be heat treated under this forming process.

we are manufacturer of pipe fittings, stainless steel pipe fittings, stainless steel erw pipe fittings, stainless steel seamless pipe fittings, stinless steel welded pipe fittings, stainless steel buttweld pipe fittings, stainless steel 304 pipe fittings, stainless steel 304L pipe fittings, stainless steel 310 pipe fittings, stainless steel 316 pipe fittings, stainless steel 316L pipe fittings, stainless steel 321 pipe fittings

UNS S31803 pipe fittings is a duplex grade with a ferritic-austenitic microstructure. The alloy consists of around 40-50% ferrite in the annealed condition. The duplex microstructure has the high strength of the ferritic grades whilst retaining the corrosion resistance of the austenitic grades.

Fortunately, both carbon steel and stainless steel are very affordable compared to nickel alloys. Carbon steel pipes are often listed as the cheapest steel for plumbing, but stainless steel is often a close second. It allows you to choose the right material that best suits your project without major consideration of cost.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Alloy 20 elbows have great resistance to attack by various acids, especially sulfuric acid. They can even withstand the aftermath of contact with hot sulfuric acid. These are equally valid as bases.

As far as the machinability of the pipe is concerned, the same set-up and way speed can be achieved with austenitic stainless steel for an excellent surface finish. Stainless steel UNS S31603 fittings can be used in a wide variety of procedures including: stress relief valves, centrifugal pumps, pilot valves, and more. It has significant resistance to preferred corrosion, crevice corrosion and pitting corrosion. It has realistic immunity to chloride pressure corrosion cracking. It exhibits significant preferred corrosion resistance.

Hastelloy C-276 alloy can be forged, hot-upset, and impact extruded. Although the alloy tends to work-harden, it can be successfully deep-drawn, spun, press formed or punched.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Stainless steel as 304 or 316 casting combines good corrosion resistance and high strength, which allows the reduction in wall thickness and weight of pipe fittings. Besides, it can withstand very high flow rates, making it capable to withstand long-term exposure to the elements in almost any environment.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

316L elbow minimises harmful carbide precipitation due to welding.

C-22 is a great alternative when superaustenitic stainless steels (AL-6XN, 904L, and 254 SMO) and duplex stainless steels (2205 and 2507) will not withstand extremely aggressive media. This is because it is a nickel-chromium-molybdenum-tungsten alloy with better overall resistance to uniform and localized corrosion than any other Ni-Cr-Mo alloy, like Hastelloy C-276, C-4, and alloy 625.

We also produce Carbon Steel ASTM A234 WPB Threaded elbows with all male connections, all female or a combination of each.

Inconel 600 butt welded fittings are also resistant to stress-related corrosion cracking in chloride environments. They are effective against alkaline environments. Inconel 601 fittings also exhibit all of these properties, but due to the addition of aluminum to their chemical composition, they exhibit improved mechanical performance even in extremely hot environments.

Inconel601 has excellent oxidation resistance at high temperature.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.