one-second stainless pipe fitting union factory supply

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

Nickel alloys are combinations of nickel and a variety of other metals that make strong, oxidation-resistant products with an average lifespan of 25 to 35 years. Monel 400 is a nickel-copper alloy containing approximately 67% nickel and 23% copper.

Alloy 400 is a nickel copper solid solution strengthened alloy. The alloy is characterized by moderate strength, good weldability, good general corrosion resistance and good toughness.

Annealing is a specific process of heat treatment that alters the properties of metal. While there are many different types of heat treatment, annealing is popular because it increases ductability and reduces hardness.

The alloy can be machined at satisfactory speeds with machine tools commonly used in the industry. Generally, cold drawn or cold drawn stress relief materials are recommended for the best machinability and smoothest finish.

The HT PIPE couplings are designed for the repair of damaged pipes. To?install the split repair couplings, it is not necessary to remove a piece?of pipe from the pipe, which considerably reduces the time and?material required during repairs.

They are used in plumbing fixtures such as domestic, commercial and industrial water supply lines, machinery and process equipment. They are also installed on the pump line and their sole purpose is to remove air blockages.

A socket weld is a pipe connection detail in which the pipe is inserted into a recessed area of a valve, fitting or flange. It is mainly used for small pipe diameters and is generally used for pipes with a nominal diameter of NPS 2 or less.

ASTM A182 refers to low-alloy steel forgings. It belongs to carbon steel.

For the pipe fittings of small size, such as tee, tee and elbow of socket welding and thread, the shape is relatively complex, so the die forging process should be used.

The alloying element that makes steel ¡®stainless¡¯ is chromium; however it is the addition of nickel that enables stainless steel to become such a versatile alloy.

Steel pipe elbows are important components in plumbing piping systems for changing the direction of fluid.

Stainless steel pipe fittings are parts that connect pipes to pipes, their purpose is to connect, control and change direction, divide, seal, support various parts in the piping system, select and prepare suitable pipe fittings to connect together, there are many types, sizes , grades and specifications to meet specific requirements.

Hence, materials with low carbon content such as ASTM A105 Fittings are not recommended to be used in those applications which have the need to be constantly exposed to a range temperatures above this value.

Inconel 600 is non-magnetic, has excellent mechanical properties, combines high strength with good workability, and is easy to weld. Alloy 600 exhibits cold forming properties typically associated with chromium-nickel stainless steels.

The working pressure of nickel alloy fittings will vary with the size and construction of the pipe, the type and number of clamps used, the location of the clamps, the correct installation of the clamps, the temperature and the product being conveyed. Fittings are available in the widest range of wall thicknesses and materials in the industry.

ASTM 182 is used for pressure systems, including fittings, flanges,and similar parts that conform to specified dimensions or dimensional standards such as ASME codes.

ASTM A105, also known as carbon steel, is an iron-carbon alloy with an internal carbon content of nearly 2 percent.

A pipe cap, also known as a head, a plug, or a baffle, is a pipe fitting that is welded on the pipe end or installed on the external thread of the pipe end to cover the pipe. It is used to close the pipe, and the function is the same as the pipe plug.

Our pipe elbows are widely used in many industries, such as power generation, petroleum, natural gas, chemicals, shipbuilding, heating, papermaking, metallurgy and so on.

ASTM A105 Socket weld Fitting is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fittings, Socket Weld Fittings are mainly used for small Pipe Diameters (Small Bore Piping); Generally for Piping whose Nominal Diameter is NPS 2 or smaller.

Apart from this, they can be easily elongated by 30% and still possess excellent workability.

Nickel is so important that nickel-containing grades make up 75% of stainless steel production. The best-known of these are Type 304, which has 8% nickel and Type 316, which has 11%.

Heat treatment services for stainless steel and metal alloys
Solution annealing (also referred to as solution treating) is a common heat-treatment process for many different families of metals. Stainless steels, aluminum alloys, nickel-based superalloys, titanium alloys, and some copper-based alloys all may require solution annealing.

Nickel fittings are manufactured through a hot or cold forming process, which means it can be bent and formed into the correct shape.

Alloy 400 also has excellent corrosion resistance in a variety of media including seawater, hydrofluoric acid, sulfuric acid and alkalis. Used in marine engineering, chemical, hydrocarbon processing equipment and heat exchangers.

At elevated temperatures it offers resistance to oxidation, carburization, and sulfidation along with rupture and creep strength.

Alloy 625 (UNS N06625) is a nickel-chromium-molybdenum alloy with an addition of niobium.

HT PIPE is a leading exporter, manufacturer, and supplier of SS 304 Forged Fittings with an ISO certification. They provide ultimate convenience to their clients by producing high-quality Stainless Steel 304 Forged Fittings offered at reasonable and competitive prices.

ASME B16.9 is a widely recognized standard in the industry for fittings, flanges, and valves used in pipelines. The specifications of this standard cover dimensions, tolerances, materials, and markings for varying types of products. One commonly used product is the elbow, and the A234 WPB Long Radius Carbon Steel Elbow is a popular choice.

Pipe plugs are defined as cap end of fractional tubes used in a large number of industries. These pipe plugs are designed to insert into the end of tubing to dead-end the flow. Various materials are used to manufacture high quality tube plugs in a variety of end connections.