pipe 304 inch

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

ASTM A312 TP316 is a standard specification for seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipes used in high-temperature and general corrosive service applications. The 316 Seamless Industrial Steel Pipe is made from a combination of chromium, nickel, and molybdenum, which gives SS 316 Seamless Tube excellent resistance to corrosion and rust.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

ASME B36.19M is the standard specification for stainless steel pipes, which specifies the dimensions, tolerance, and manufacturing requirements for both welded and seamless pipes.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

ANSI B16.5 Class 150 Stainless Steel Flanges
Stainless steel forged flanges?are used as a connection component for pipes, valves, pumps and other equipment to form a pipework system.?To make the connectionflanges?are usually welded onto pipes or screwed onto a threaded pipe end and then joined with bolts.

ASTM A790 specified 2205 Stainless Steel Pipe ability to resist stress related corrosion cracking.

stainless steel flange is a kind of general steel material, which is widely used to manufacture equipment and parts with high requirements for comprehensive performance (corrosion resistance, formability). stainless steel is a stainless steel grade produced according to American ASTM standards. stainless steel is the most widely used stainless steel and heat-resistant steel. It is applicable to food production equipment, Xitong chemical equipment, nuclear energy, etc.

A weld neck flange, also called a tapered hub flange or high-hub flange, is a kind of flange that can relocate stress to the pipes, ensuring a decrease in high-stress concentration at the bottom of the flange.

Inconel 718 Hex Nuts offer high strength and corrosion resistance. Additionally, they are known for their high strength capabilities and 1800¡ãF availability. The excellent corrosion resistance of Inconel 718 at high temperatures is due to the nickel-chromium content, even when resisting chloride stress corrosion cracking. Adding molybdenum to the alloy helps prevent pitting corrosion.

Stainless Steel DIN 1.4539 Slip on Flanges, Stainless Steel 904L Flange, 904L Stainless Steel Weld Neck Flanges Exporter in Singapore, ASTM A182 Stainless Steel 904L Socket Weld Flanges, Stainless Steel SUS 904L Orifice Flange Manufacturer

Incoloy alloys belong to the Inconel family. This means that the alloy can be used at high temperatures. At high temperatures, a problem associated with certain grades of stainless steel is oxidation. The chemical composition of Incoloy 800 fasteners allows them to be used at high temperatures. The higher the carbon content, the more chance they have to withstand high temperatures. Therefore, manufacturers produce derivative alloys of UNS N08800 bolts, called Alloy 800H and Alloy 800HT, which have slightly different chemical compositions.

Hastelloy is a corrosion-resistant nickel alloy that contains other chemical elements such as chromium and molybdenum. This material has high temperature resistance and exceptional corrosion resistance. Hastelloy C276 is one of the grades of Hastelloy used in the oil and gas industry.Hastelloy nickel alloys are fully resistant to a vast array of chemicals, including highly acidic hydrochloric and sulfuric acids. It is also one of the few materials available that can withstand wet chlorine gas, chlorine dioxide and hypochlorite.

660 Studs, non-magnetic in the annealed condition, but may become slightly magnetic by welding. Although it has the same high strength and corrosion resistance as other steels, ASTM A453 Gr. 660 Hex Head Bolts produce stronger welds due to their low carbon content. ASTM A453 Grade 660 Studs are suitable for temperature applications. This grade of fasteners is divided into A, B, C, D grades. Materials are carbon, manganese, phosphorus, sulfur, silicon, nickel, chromium, molybdenum, titanium, aluminum, vanadium, boron. ASTM A453 Grade 660 Bolts derive their strength and corrosion resistance from a combination of materials.

The advantage of the dual-phase structure is that it combines the advantages of ferritic alloys (resistance to stress corrosion cracking and high strength) with the advantages of austenitic alloys (ease of manufacture and corrosion resistance).

Fasteners play a critical role in the construction of all sorts of everyday objects. If you¡¯ve done any DIY projects, you¡¯ve likely used fasteners to help get the job done.Fasteners are used for fastening and securing materials such as wood, metal, plastic, or concrete. They include nuts and bolts, threaded rods, structural bolts, machine screws, wedge anchors, washers, rivets, and more in a variety of types and sizes, including metric and inch.

Incoloy 800H Flange Incoloy 800 / 800H / 800HT Flanges are furnished with nickel-chromium-iron alloys that intend outstanding resistance and strength at harsh environments. The flanges exhibit superior resistance to chloride stress corrosion cracking and crevice corrosion. Even more, it also shows superior intergranular corrosion, stress rupture and creepy aspects. The welding of these flanges is done using various techniques such as MIG, TIG and more.

Stainless steel is an alloy of iron that is resistant to rusting. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen.

The Alloy 800 series (Incoloy 800, 800H and 800HT) are nickel-iron-chromium superalloys that provide high temperature strength and resistance to oxidation, carburization and other types of high temperature corrosion. Alloy 800 (UNS N08800), Alloy 800H (UNS N08810) and Alloy 800HT (UNS N08811) have the same nickel, chromium and iron content, except for the total titanium and aluminium content (0.85 to 1.2%) to ensure optimum high temperature performance.

Stainless steel 201 belongs to an austenitic grade of steel. The 201 Stainless Steel Pipe is designed with a superior composition of chromium, iron, manganese, nickel, silicon, nitrogen, and carbon. This gives the non-magnetic grade superior resistance to corrosion across stress-induced systems. 201 SS Pipe has a density of 7.86 g/cm3 and works well in low and high temperature setups.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Although blind flanges and certain reducing flanges could include plate as a material for construction.

The Stainless Steel 317L RTJ Flange has two rings as a pair and is connected to the pipes via welding. Just like the socket weld flanges, the SS 317/ 317L Weld Neck Flange has a neck welded onto it for better connection.

Inconel 600 Flange,Alloy 600 Flange (UNS designation N06600) is a nickel-chromium alloy designed for use in applications from cryogenic to elevated temperatures in the range of 2000 ¡ãF (1093 ¡ãC). Alloy 600 is non-magnetic and readily weldable.

HASTELLOY B-2 ALLOY. A nickel-molybdenum alloy with outstanding resistance to hydrochloric and sulfuric acids in the as-welded.Hastelloy B2 is a nickel-molybdenum alloy with significant resistance to reducing environments.

ASTM A193 Grade B7M bolts and studs have the same chemical composition as Grade B7 (quenched and tempered medium carbon alloy steel) but have lower strength requirements requiring 100% hardness testing on all fasteners manufactured in the batch. Grade B7M bolts are resistant to chloride, sulfide and hydrogen stress corrosion cracking (SCC) and are often used in sour gas service.

The combined effects of mechanical and thermal processing of Incoloy Alloy 800HT permit higher design stresses to be incorporated than are permitted for the conventional Alloy 800H.

Inconel 601 (N06601) nickel-based alloy plasticity:
Inconel 601 (UNS N06601) nickel base alloy is relatively easy to hot work. The heating temperature is 1150~1200C, and the thermal processing temperature is
1050~1200C, simple processing can be carried out below 850¡ãC.

Stainless steel flange not only saves space and weight, but also ensures that the joint will not leak and has good sealing performance. The compact flange size is reduced because the diameter of the seal is reduced, which will reduce the section of the sealing surface.

Some typical applications for Inconel 625 include chemical processing, aerospace and marine engineering, pollution control equipment and nuclear reactors.

Incoloy 825 fasteners were an integral part of our original product line. BoltPort is a well-known manufacturer and supplier of Incoloy 825 fasteners such as stud bolts, hex bolts, heavy hex bolts with hex and heavy hex nuts, flat washers, spring washers and more. These Alloy 825 fasteners are thermoformed and formed in our factory from a semi-finished stock.

In chemical processing, the alloy is used for components including heat exchangers, reaction vessels, evaporators and transfer piping.

Alloy B2 (UNS N10665 / W.Nr. 2.4617) is a solid solution strengthened, nickel-molybdenum alloy, typically used in extreme reducing conditions.

We are a manufacturer, trader, stocker, supplier and exporter of B7-2H Fasteners.

ASTM A182 F316 is a forging material specification for 316 grade stainless steel and is used for manufacturing bare forgings or forged and machined products for applications involving high temperature service.