pipe 6mm n06601

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Some typical applications for HASTELLOY C276 include equipment components in chemical and petrochemical organic chloride processes and processes using halide or acid catalysts. Other industrial applications include pulp and paper (digester and bleaching zones), scrubbers and pipes for flue gas desulfurization, pharmaceutical and food processing equipment.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19

Hastelloy C-276 is a nickel-molybdenum-chromium-tungsten alloy with excellent general corrosion resistance and good machinability. The alloy should be considered for use in environments requiring resistance to thermally contaminated inorganic acids, organic and inorganic chloride-contaminated media, chlorine, formic and acetic acids, acetic acid, acetic anhydride, seawater and brine solutions.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.46

Seamless nickel alloy pipes can be used in high temperature aircraft systems, steam generator piping, nuclear power industry, and oil and gas extraction projects that require corrosion, pressure and temperature resistance. It has no seams or welded joints and is cold drawn and hot rolled. It requires this perceived structural defect and is considered safer than welding nickel alloy pipes.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.43

Incoloy Alloy 601 Tubing can use in carburizing equipment, heating-element sheathing, process piping, heat exchangers, nuclear steam-generator tubing, and Incoloy Alloy 601 Tubing can be used in heat-treating equipment, chemical and petrochemical processing, power plants, industrial furnaces as well.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

The pipes are having good stress corrosion cracking and pitting resistance ability.

In C276, molybdenum makes Hastelloy harder and stronger at high temperatures. The properties of this alloying element and its incorporation into the material also make it ideal for welding applications. These nickel alloys are easy to manufacture and form. They also exhibit good ductility and are capable of cold working.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.42

C276 is a nickel-molybdenum-chromium superalloy with tungsten added, designed for excellent corrosion resistance in a variety of harsh environments. The high nickel and molybdenum contents make nickel steel alloys particularly resistant to pitting and crevice corrosion in reducing environments, while chromium is resistant to oxidizing media.

Inconel X750 ERW Pipes is a Chromium-Nickel alloy made from precipitation hardenable by accompaniments of Ti and Al, having creep – rupture potency at soaring …

Incoloy 800 Tubes are superalloys that are composed of a nickel-iron-chromium base and can resist both carbonization and oxidization in high temperature settings. Incoloy 800 Tubes are easy to fabricate, utilizing the same machines and processes as stainless steel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Inconel Pipe is a nickel-chromium alloys which is utilized totally different welding forms. Inconel Pipe is most commonly utilized in procedures where high heat tolerance is required.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

UNS N07718 Inconel Long Radius Elbows are 1.5 times larger than the nominal diameter of the pipe and withstand high pressure and heat. Industries such as cement and sugar use Inconel elbows for better and uniform product flow. Premium Inconel ASTM B366 UNS N06625 Seamless Bends, Bend Radius Range R=3D-10D, Bend Angles From 10 Degrees To 180 Degrees, Available From Stock.

Hastelloy C-276 can be forged, hot upset and impact extruded. Although the alloy tends to work harden, it can be successfully deep drawn, spun, press formed or stamped. All common welding methods can be used to weld Alloy C-276, but oxyacetylene and submerged arc processes are not recommended when the manufactured item is intended for corrosion service. Special precautions should be taken to avoid excessive heat input.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.49

1. Piling Project
2. Heat-Supply Project
3. Conveying Drinking Water,Drainage,Coal Gas,Fuel Gas,Mine Slurry And Other Low & Middle Pressure Fluids
4. Api5L Petroleum And Natural Gas Pipeline
5. Chemistry Industry
6.Electric Power Engineering Circulating Pipe

La tuberia sin costura ASTM B167 inconel 600 es menos resistente a las soluciones oxidantes fuertes, como el acido nitrico concentrado calentado.

Alloy 718 for the oil industry is heat treated such that the hardness does not exceed 40HRC which is the maximum allowed by NACE MR-01-75/ ISO 15156: 3 to prevent stress corrosion cracking. The major applications in this field are Valves and precision tubing.

La tuberia Incoloy 800 es una de esas tuberias de alta resistencia que tambien es resistente a la oxidacion y la carburacion. Por lo tanto, estas tuberias se utilizan en aplicaciones donde se requiere resistencia a la corrosion y la carburacion.

The optimum conditions for Alloy 601 seamless pipe depend on the type of application and the service temperatures involved. Generally, Alloy 601 pipe in solution treated condition is used in fracture-limited applications, where temperatures can be as high as about 1000¡ãF and still may rise.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Alloy C 276 (UNS N10276/ 2.4819) is known for its corrosion resistance in a variety of corrosive media. The high molybdenum content imparts resistance to localized corrosion such as pitting. Low carbon minimizes carbide precipitation during welding to maintain the resistance of the welded joint heat affected zone to intergranular erosion. It is used in chemical processing, pollution control, pulp and paper, industrial and municipal waste treatment, and recovery of “sour” natural gas. Applications in air pollution control include stack liners, ducts, dampers, scrubbers, stack gas reheaters, fans and fan guards. In chemical processing, the alloy is used to make components such as heat exchangers, reaction vessels, evaporators and transfer piping.

The Inconel 3″ Tube has a small palladium addition to improve corrosion resistance, particularly in mineral acids and strong brines. These Inconel Tubes is a high carbon modification developed for enhanced creep resistance.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Hastelloy B3 pipe has good resistance to stress corrosion cracking that is chloride induced. The good resistance to a wider range of organic acids makes Hastelloy B2 pipes a popular product.

B2 has significantly lower carbon, silicon and iron compared to its¡¯ predecessor, Alloy B (UNS N10001), making the alloy less susceptible to decreased corrosion resistance in the weld zone, in the as-welded condition.

La materia prima de Alloy 20 es de alta calidad. Esto ayuda a que el producto final funcione en condiciones severas de corrosion y agrietamiento. A traves de una serie de pruebas, hemos llegado a diferentes informes y conclusiones. Nuestro analisis promete pruebas quimicas, pruebas de elementos traza y varias otras comprobaciones.

ASTM B619 UNS N10276 C276 pipes are also available in other shapes such as square, rectangular and hexagonal pipes. 2.4819 Hastelloy C-276 Alloy C276 pipe is used in applications where bending should not reduce strength. These ASTM B619 N10276 seamless pipes are mainly used to transport fuels from one place to another, as well as chemicals in different parts of processing plants.

Nickel 200 tubes are made from commercially pure nickel. This is a forged product with good strength and very high corrosion resistance. The material also has very low electrical resistance.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.57

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Monel 400 has excellent corrosion resistance in hydrofluoric acid and fluorine gas medium.

ASTM B705 Alloy 825 Welded Pipe Radioactive Waste Stream and Nuclear Fuel Reprocessing. Typically, nuclear power plants and radioactive processing plants release high thermal energy.

Hastelloy B2 pipes are available in custom sizes and thicknesses according to customer requirements. They are readily available in national and international standards at very effective prices. It is a strengthened nickel alloy used under extreme reducing conditions. They are made of high-quality raw materials. It comes in various grades and forms.