pipe astm a335 p92

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Chromium increases the tensile, yield and hardness of steel at room temperature. This is why ASTM A335 chrome-molybdenum alloy seamless steel pipes are mainly used in power plants, refineries, chemical plants and oilfield platforms where fluids and gases are transported under extremely high temperatures and pressures.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P97

The alloy content of pipes that make up low alloy steel is less than 5%. High alloy steels, on the other hand, have an alloy content ranging from 5% to about 50%. Similar to most alloys, the working pressure capacity of alloy steel seamless pipe is about 20% higher than that of welded pipe.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P127

Alloy steel pipes are used in applications requiring moderate corrosion resistance, good durability, and economical cost. Simply put, alloy pipes are preferred in those areas where carbon steel pipes can fail. There are two types of alloy steel – high alloy steel and low alloy steel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P126

ASTM A193 Grade B7 bolts are made of chrome-molybdenum material with high tensile strength and good elongation properties.

Alloy steel DIN 1.7335 round bars also offer some other outstanding properties such as perfect finish, dimensional stability, light weight, high load-carrying capacity, longer life, fine dimensions and more.

ASTM A193 B7 bolts are manufactured to meet numerous specifications and material design properties. More specifically, B7 alloy steel is a high temperature grade of A-193. B7 steel is also a chromium molybdenum steel with a minimum tensile strength of 125ksi.

Alloy Steel Flange Material can differ according to its chemical composition. Low Alloy Steel Flanges are widely used for automotive and aerospace bodies, offshore and onshore structural engineering plates and railway lines.

ASTM A182 Grade F2 is an alloy steel used for preliminary forming into forged products. The properties cited apply to the annealing conditions. F2 is the ASTM designation for the material. K12122 is the UNS number.

ASTM A860 MSS SP 75 WPHY 52 Fittings are generally used at High Pressure requirements.Our wide range of Grade WPHY 52 Pipe Fittings includes: WPHY Gr 52 Bend, Elbow WPHY 52 in 45/90 degree, WPHY Grade 52 Tees, Carbon Steel WPHY 52 U Bend, MSS SP75 WPHY Gr 52 Stubends & ASTM A860 WPHY Grade 52 Pipe Nipple.

A182 F5 grade slip flanges are known for their low material cost and ease of installation. One of the added benefits of these flanges is that they can also be used as lap flanges if dealing with Type B or C ends.

Alloy steel hollow bars offer excellent corrosion resistance and dimensional accuracy with tight tolerances.

The connection between two pipes can be directly welded together, but it is difficult to connect together without welding. When the connection part have problems, it will be hard to repair. The same problem also happened between pipe and valve connection.

The most common application for A182 F2 round bars is shafts. It has various alloying elements that enhance its mechanical properties.

The alloy steel slides on these elbows can be machined and polished in a stress-relieved condition.

The material is made up of carbon, manganese, phosphorus, sulfur, silicon, chromium and molybdenum in the composition.

Chrome molybdenum grades P11, P22, P91 and P92 are used in the power industry. Chromium molybdenum grades P5 and P9 are used in petrochemical refining processes. Chrome molybdenum forged fittings and flanges are available in grades F5, F9, F11, F22, F91, F92. Chrome-molybdenum alloy butt welded pipe fittings are available in WP5, WP9, WP11, WP22, WP91, WP92 grades. F11 and F22 materials comply with NACE-MRO 175.

The a182 f9 flange is considered a cost saving option. In addition to these properties, astm a182 f9 is reusable and corrosion free.

HastelloyC-276 (Hastelloy) is a tungsten-nickel-chromium-molybdenum alloy with extremely low silicon-carbon content and is considered to be an all-around corrosion-resistant aluminum alloy. The key moisture-resistant chlorine, various air-oxidizing fluorides, isopropyl titanate solutions, hydrochloric acid and air-oxidizing salts, have good corrosion resistance in ultra-low temperature and standing temperature sulfuric acid. Therefore, in the past 30 years, it has been widely used in extremely corrosive natural environments such as chemical plants, petrochemicals, flue gas desulfurization, pulp and paper industry, and environmental protection.

Corrosion resistance

The aluminum alloy has the following characteristics: 1. It has good corrosion resistance to most corrosive substances under the two conditions of air oxidation and repair. ¢ÚIt has good resistance to pitting corrosion, void corrosion and intergranular corrosion. The higher content of Mo and Cr makes the aluminum alloy resistant to corrosion by chloride ion content, and the W element further improves the corrosion resistance. At the same time, Hastelloy C-276 aluminum alloy is one of the only types of raw materials that are resistant to wet chlorine, hypochlorite and chlorine dioxide saturated solutions. Ester solution has obvious corrosion resistance. It is one of the very few raw materials that can be used as a hot sulfuric acid saturated solution.

ASTM A335 pipes (P5, P9, P11, P22, P91 pipes) are known as chrome molybdenum alloy pipes and have been widely used in high temperature and high pressure services in different industries. According to market data, it is one of the most consumed alloy pipes in the boiler industry, heat exchangers, power stations, high pressure and ultra-high pressure vessels.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P115

For most applications, INCONEL alloy 718 is specified as: solution annealed and precipitation hardened (precipitation
hardening, age hardening, and precipitation heat treatment are synonymous terms).Good mechanical properties: tensile, fatigue and creep-rupture

It is a standard specification defining typical chemical composition, mechanical properties, hardness requirement, preferential heat treatment, product marking, certification and other requirements, suitable for bolting used in pressure vessel service, valves, flanges and fittings. ASTM A193 defines both SI (Metric) and inch-pound units.

Pipes made of SA335 p11 material are commonly used in a variety of applications in different plants and processes around the world. For example, applications for SA335 grade p11 tubing include power plants, petrochemical plants, refineries, hydrocrackers, cokers, reheat pipelines, distillation, oilfield services, high temperature and ultra-high temperature pipelines, and more.

Forged Pipe Fittings (Socket Weld and Threaded) are made in
accordance to ASME B16.11, MSS-SP-79/ 83/ 95/ 97 and BS3799
standards, and are used to connect nominal bore schedule pipes
and pipelines.

Chromium molybdenum has a better strength-to-weight ratio than steel, which enables designers to use thinner walled tubing or smaller diameter tubing to reduce overall weight.

Alloy Steel Threaded Flanges are widely demanded as pipe flanges i.e called as threaded flanges which is useful in different industrial applications. It is also known as screwed flange and it has a thread inside the flange bore which fits on the pipe with matching male thread on the pipe.

Astm a335 P91 pipe is a seamless pipe for high temperature applications. These pipes are made of ferritic alloy steel. Chemically speaking, a335 P91 welded pipe contains elements such as molybdenum (Mo) and chromium added to the alloy. The tensile strength of sa335 grade P91 pipe increases when molybdenum and chromium are added to the alloy. The tensile strength of a335 grade P91 pipe is 415 Mpa, while its yield strength is 205 Mpa. Pipe elongation ranges from 20% to 30%.

Chrome moly flanges provide improved levels of chromium and molybdenum. The addition of chromium helps to increase itshardenability and corrosion resistance,

A182 F91 Wrought alloy steel tubes, flanges, wrought fittings and valves and other components for high temperature use.

Alloy steel is divided into two categories: high-alloy steel and low-alloy steel. Low alloy steel flanges, on the other hand, contain about 0.05 ¨C 0.25% carbon and up to 2.0% manganese.

Chromium-molybdenum alloy steel has strong crack resistance under high temperature and high pressure. Chromium molybdenum is also resistant to hydrogen attack and hot sulfide corrosion cracking.