pipe boss fitting

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

Steel pipe elbow plays a key role in the pipe fittings, which frequently used in different application and available in various shapes and sizes. It connects two pipes with same or different nominal diameters, and to make the pipe turn to a certain direction of 45 degree, 90 degree or 180 degree.

To make the structure and composition of stainless steel castings uniform, which is especially important for raw materials, because the casting temperature and cooling rate are not the same, resulting in inconsistent microstructure. With high temperatures, the atomic activity intensifies and the ¦Ò phase dissolves, and its chemical composition tends to be uniform. A uniform single-phase structure is obtained after cooling quickly .

Stainless steel 304 welded outlets can become very brittle at long-term temperatures of 1200¡ãF to 1500¡ãF. Also for machinability of stainless steel 304 socket weld outlets, high speed turning and cooling tools are recommended. The range of stainless steel 304 threaded outlets shown is made up by utilizing high grade machinery and modern methods to pass many strength limitations.

Usually, these applications are pressure systems, and it is seen in many instances, the ASTM A105 Threaded Fittings add value to said application.

This alloy is most commonly used in a range of environments from mildly oxidizing to neutral and moderately reducing conditions. Other areas of application for this material are marine environments and other non-oxidizing chloride solutions.

Carbon steel material is used for forging. This material can be in shape of a bar or in shape of the ingot to meet various forging requirement. They offer maximum machinability and weldability.

The body of a pipe coupling is typically made of either the same or similar materials as that of the pipes it joins. They may be rigid or flexible depending on the amount of movement the pipe is subjected to and may also be permanent or removable.?

They can be either cold or hot rolled in different shapes to suit various applications.

Heat treatment services for stainless steel and metal alloys
Solution annealing (also referred to as solution treating) is a common heat-treatment process for many different families of metals. Stainless steels, aluminum alloys, nickel-based superalloys, titanium alloys, and some copper-based alloys all may require solution annealing.

HT PIPE is a leading exporter, manufacturer, and supplier of SS 304 Forged Fittings with an ISO certification. They provide ultimate convenience to their clients by producing high-quality Stainless Steel 304 Forged Fittings offered at reasonable and competitive prices.

These alloys can suffice in high pressures and extreme temperatures.

ASTM A182 Alloy Steel Forged Fittings are manufactured according to the ASTM A182 specification, which covers high pressure and high temperature service flanges covered by ASME B16.11, MSS-SP-79/ 83/ 95/ 97 and BS3799 standards.

ASTM A105 is also called carbon steel, refers to the carbon content of WC less than 2% iron carbon alloy.

The Curie temperature of this alloy lies within the ambient temperature range and is affected by changes in the alloy’s chemical composition. Caution is recommended in applications requiring strong non-magnetic properties.

Solution treatment is the most common heat treatment method after stainless steel casting process. The carbide phase is completely or substantially dissolved after the austenitic stainless steel is heated to about 1100 ¡ãC .

ASTM a105 forged fittings is heavier, thicker and are intended for heavy industrial use. It is made up of forged carbon steel. Forging steel process makes the fitting very strong. Carbon steel is heated to molten temperatures and placed in the dies.

Alloy 625 (UNS N06625) is available in Round Bar, Flat Bar, Extruded section, Pipe, Tube, Plate, Sheet, Strip, Plate, Hexagon, Forging Stock, Extruded Section, Wire and Powder.

In addition to being reliable, it has a high tolerance capacity. Our Stainless Steel 304 Forged Fittings are produced using modern technology and high-quality raw materials that assure compliance with international standards.

Cu-Ni forged threaded fittings are usually supplied as redrawn tubes in the annealed condition. The combination of good ductility and strength provides excellent formability. In addition to this, these forged fittings are also resistant to rust, oxidation, pitting, stress cracking and crack stress.

Hastelloy C276 is resistant to localized corrosion such as pitting and stress corrosion cracking.

Resistant to various corrosive media. Chromium content provides better resistance in oxidizing conditions than alloys 200 and 201, while high nickel provides good resistance in reducing conditions.

A pipe cap, also known as a head, a plug, or a baffle, is a pipe fitting that is welded on the pipe end or installed on the external thread of the pipe end to cover the pipe. It is used to close the pipe, and the function is the same as the pipe plug.

Nickel Alloy C-276 and Hastelloy C-276 can be welded by all common welding methods (oxyacetylene is not recommended).

For the pipe fittings of small size, such as tee, tee and elbow of socket welding and thread, the shape is relatively complex, so the die forging process should be used.

HT PIPE is one of the well-known manufacturers of ASME B16.11 threaded bushings, manufactured in a variety of styles and materials, designed to fit a variety of standard and metric threads as well as various types of threaded fittings and assemblies. We offer threaded hex bushings that have excellent resistance to chloride ion stress corrosion cracking, and also exhibit appropriate resistance to a variety of oxidizing environments.

Stainless Steel 316 is a molybdenum austenitic alloy that is highly resistant to corrosive and chloride environments. Typically, this grade of stainless steel is used in exhaust manifolds, heat exchangers, jet engines and many other applications.

We pride ourselves on being at the forefront of innovation in both product lines and after sales services. This is why we will constantly upgrade our products and services to meet market expectations and demands.

HT PIPE is a manufacturer, stocker and supplier of high quality Nickel Alloy 200 Olets, which are manufactured under the expert guidance of our hardworking staff.

Tube caps are used as protective devices designed to protect tube ends of various shapes. The main purpose of using pipe caps is to waterproof connections. They are also used to close the ends of hydraulic or pneumatic pipes and tubes.

Strength and toughness indicators are among the best among all steels. Its most prominent advantage is corrosion resistance. Stainless steel must be used in highly corrosive occasions such as chemical papermaking. Of course, the cost is also higher!