pipe fitting ends cap dimensions

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

We are exporters and suppliers of Inconel DIN No. 2.4856 Pipe Tees that are heavy-duty, leak-free and corrosion proof. Also We offer wide range of Inconel ASTM B366 600 Pipe Fittings such as Inconel 600 Tee, Alloy 601 End Pipe Cap, Inconel 625 reducer, Inconel Alloy 718 cross, Inconel 600 elbow, Inconel 625 stub ends etc.

INCOLOY alloy 800 (UNS N08800, W. Nr. 1.4876) is a widely used material for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500¡ãF (816¡ãC).

Usually, the structure of a pipe joining consists of the same or identical materials as the pipes it joins. Based on the amount of pressure the pipe is exposed to, they may be solid or fluid, and can even be permanent or temporary.

A105 shall be subjected to heat treatment (annealing, normalizing, tempering, or quenching). A105 shall conform to carbon, manganese, phosphorus, sulfur, silicon, copper, nickel, chromium, molybdenum and vanadium contents.

A socket weld is a pipe connection detail in which the pipe is inserted into a recessed area of a valve, fitting or flange. It is mainly used for small pipe diameters and is generally used for pipes with a nominal diameter of NPS 2 or less.

The main difference between stainless steel bottle caps and carbon steel bottle caps is the difference in material. The chemicals contained in stainless steel caps will keep the surface of the cap from rusting and corroding for a long time.

A182-F11 has good process performance and welding performance, and high durable strength at 500 ~ 550¡æ.

Stainless steel has been in use for more than one hundred years.

ASTM A182 refers to low-alloy steel forgings. It belongs to carbon steel.

A Sockolet is similar to a Weldolet, with the difference that the branch pipe is connected to the run pipe, via the fitting, with a socket weld connection as per ASME B16.11. Likewise Weldolets, Sockolets are used to make a 90-degree pipe branch. Sockolets may be ¡°size on size¡± or ¡°reducing¡±.

Alloy 625 (UNS N06625) is a nickel-chromium-molybdenum alloy with an addition of niobium.

Hastelloy C276 bushings are widely used in the harshest environments such as chemical processing, pollution control, pulp and paper, industrial and municipal waste treatment, and recovery of sour natural gas.

In the piping system, stainless steel 304 elbow is a pipe fitting that changes the direction of the pipeline. The chemical composition contained in the stainless steel elbow will keep the surface of the elbow free from rust and corrosion for a long time. According to the angle, the most commonly used are 45¡ã and 90¡ã180¡ã. In addition, according to engineering needs, other abnormal angle elbows such as 60¡ã are also included.

It has excellent solderability and can withstand very high pressure and weight. The alloy has excellent mechanical properties at sub-zero temperatures, with a melting point of 2370¡ã – 2460¡ã F, and the product can be used at temperatures up to 1000¡ã C.

Nickel alloy is a component that contains nickel as a principal element and in higher concentration. It is a solid material that offers wide solubility with iron, chromium, and copper as well. The alloy is present in combined form as well. Nickel alloy is highly versatile and able to sustain heat and corrosion resistance.

HT PIPE is a manufacturer, stocker and supplier of high quality Nickel Alloy 200 Olets, which are manufactured under the expert guidance of our hardworking staff.

You source everything directly from manufacturers and shareholders! The average daily sales volume of stainless steel pipes in our inventory is about 40 tons. We believe in offering our clients substantial discounts and work closely with them on all their project requirements. We always offer the most competitive stainless steel 90 degree elbow prices to potential and existing customers.

ASTM A182 Alloy Steel F22 Fittings are available in a variety of shapes, sizes and dimensions according to the needs or requirements of the application or to customer supplied specifications.

Socket Weld Elbow and Threaded Elbow Fitting is a fitting installed between two lengths of pipe or tubing allowing a change of direction, usually 180¡ã, 90¡ã or 45¡ã. Nickel Alloy Elbows are available in short and long radius types.

The pipe cap is directly welded to the mold at the end of the pipe; the end of the pipe can also be welded with a flange, and then blocked with the flange. If necessary, the flange can be opened to inspect the inside of the pipe. Traditional thick wall gland seat; forged; large diameter by rotation. After maintenance or even wiring is required, use a blind pipe, not later, use a pipe cap. Using a blind plate has the possibility of leakage. After a long time, the screws will rust and die, which is also useless, and the heat pipe is not easy to insulate.

Forged pipe fittings refer to pipe fittings formed by forging in pipe fittings manufacturing industry. What is said here refers to the latter forging.

Steel pipe elbow plays a key role in the pipe fittings, which frequently used in different application and available in various shapes and sizes. It connects two pipes with same or different nominal diameters, and to make the pipe turn to a certain direction of 45 degree, 90 degree or 180 degree.

A105 shall adhere to tensile strength, yield strength, elongation, reduction of area, and hardness requirements. Guidelines for retreatment, repair by welding, and product marking are given.

The alloy steel slides on these elbows can be machined and polished in a stress-relieved condition.

Our pipe elbows are widely used in many industries, such as power generation, petroleum, natural gas, chemicals, shipbuilding, heating, papermaking, metallurgy and so on.

ASTM A105 is a carbon steel material grade that has the greatest and widespread use. This is used in manufacturing forge piping components.

ASME B16.9 is a widely recognized standard in the industry for fittings, flanges, and valves used in pipelines. The specifications of this standard cover dimensions, tolerances, materials, and markings for varying types of products. One commonly used product is the elbow, and the A234 WPB Long Radius Carbon Steel Elbow is a popular choice.

As an ISO certified company, we stand by the principles of quality, safety, and precision in all our products.

The products offered are appreciated in the market due to the best performance and good quality of the products. These nickel alloy 200 outlet fittings are used in pharmaceutical plants, industrial machinery, chemical plants, oil refineries, textile machinery, sugar plants, fertilizer plants, power and cement industries, petrochemical plants, etc. We also offer 200 custom nickel Olets fitting sizes.

Stainless threaded caps are cast from high quality 304/304L/316/316L stainless steel and have female threaded cap ports.

Stainless steel threaded pipe caps cover pipe ends, stop fluid flow and protect pipe threads. These stainless steel caps are commonly used to direct flow to a specific end in a multi-end fitting, and stainless steel cap types include hexagonal and round caps.