pipe fittings elbow 60degree 45 degree 90 degree

Pipe Fittings are available in various forms like Elbow Fittings, Return Bend Fittings, Cross Pipe Fittings, Cap Pipe Fittings, Tee Pipe Fittings, Stub End Pipe Fittings, Reducer Pipe Fittings, and Coupling Pipe Fittings. Each of these forms has their own role to play as pipe fittings but with common intent of enhancing the pipe utility in various conditions.

Carbon Steel Pipe Fittings are made up of carbon steel which has a limited range of ingredients in its composition. Carbon steels have high hardness and wear and tear properties.

321 stainless steel, also known as UNS S32100 and Grade 321, is primarily comprised of 17% to 19% chromium, 12% nickel, .25% to 1% silicon, 2% maximum manganese, traces of phosphorus and sulfur, 5 x (c + n) .70% titanium, with the balance being iron. With regards to corrosion resistance, 321 Stainless Steel is equivalent to Grade 304 in the annealed condition and is superior if the application involves service in the 797¡ã to 1652¡ã F range. 321 Stainless Steel combines high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion.
UNS S32100 Reducing Tee is preferred due to its ability to work in high pressure and temperature even at a higher temperature.
Stainless Steel 321 / 321H Pipe Fittings are used in filtration, refrigeration, oil, gas, petrochemical and in offshore oil drilling industries. The material has chromium, nickel, titanium and other elements along with carbon. The 321H has higher carbon than the other versions. There are different types of fittings such as the 321/321H Stainless Steel Buttweld Fittings which are most commonly used but there are also the seamless fittings. The Stainless Steel UNS S32100 Pipe Elbow is a fitting type that is used in high temperature applications to change direction of flow.

Stainless steel 317 has high corrosion resistance. It is a molybdenum-containing austenitic stainless steel under this grade. Stainless steel 317 Socketweld union improves resistance to chemical attack. These sub-grade 317 fittings are low in carbon to provide resistance to sensitization during welding and other hot working processes.

Inconel 718 Elbow Fittings offer excellent weldability compared to aluminum and titanium hardened nickel-based superalloys.

Super Duplex S32950 Fittings are hardened on a variety of parameters such as strength, temperature, pressure resistance and durability before supplied to the customers. These UNS S32950 Super Duplex Pipe Fittings are being offered in an inclusive range such as S32950 Elbow, S32950 Bends, S32950 Equal & Unequal (reducing) Tees, S32950 Equal & Unequal (reducing) Cross, S32950 Concentric & Eccentric Reducer, S32950 End Pipe Cap, S32950 Long & Short Stub-ends, etc.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

We have Largest inventory of Super Duplex Steel S32750 Pipe Fittings. Super Duplex Stainless Steel S32750 Pipe Fittings, S32750 Super Duplex Steel Buttweld Pipe Fittings Suppliers, ASTM A815 S32750 Butt weld Fittings Exporter, S32750 Butt weld Elbow, S32750 Super Duplex Steel Pipe Fittings Dealer, Super Duplex Steel S32750 Seamless Pipe Fittings Suppliers in Mumbai, India, SAF 2507 Pipe Fittings, Super Duplex Steel Welded Pipe Fittings, Super Duplex Steel Buttweld Fittings, Super Duplex Steel UNS S32750 Pipe Fittings Stockholder, Super Duplex Steel 2507 90 deg. Elbow, Super Duplex Steel S32750 45 deg.

Sanitary pipe fittings AISI304, AISI304L, AISI316, AISI316L, its standard is DIN/SMS/3A/ISO/IDF, pipeline flow control: DN10-DN200&1 /4″”-8″, it is used in stainless steel pipe system, its working principle It can be welded on the pipeline to adjust the flow in the pipeline. Its medium includes beer, dairy products, beverages and pharmaceuticals.

It has good mechanical properties from subzero temperatures up to about 480C.

CS Gr A860 WPHY 52 Seamless Butt Weld Fittings have to be heat treated in order to achieve optimum tensile strength properties. The high strength obtained by these seamless or welded Carbon Steel WPHY 52 pipe Fittings could be increased by subjecting the material through processes such as normalizing, quenching, and tempering or stress relieving.

We supply Stainless Steel 316H Elbow Pipe Fittings to a variety of customers including fabricators of pressure vessels, industrial boilers and heat exchangers. Fusion welding performance for Stainless Steel 316H Reducer Pipe Fittings is excellent both with and without fillers. Stainless Steel 316H Tee Pipe Fittings, with its higher carbon content has application at elevated temperatures, as does the stabilised grade 316Ti.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

348 Stainless Steel is a high moly austenitic grade alloy available in form of Pipe, Tubing, Pipe Fittings, Flanges, Valves, Fasteners, Round Bar & Plates.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Super Duplex 2507 (F53 / 1.4410 / UNS S32750) has excellent corrosion resistance to a variety of media, and has excellent resistance to pitting and crevice corrosion in seawater and other chloride-containing environments, with a critical pitting temperature exceeding 50¡ãC.

The regular products of A403 WP321 pipe fittings are elbows,tees,reducers,caps,cross.

We also accept all orders of CS Elbow A234 WPB up to and including 90 degree to suit your requirements.

Duplex 2205 fittings have higher yield strength and good mechanical properties. These fittings are highly resistant to corrosion and stress. The presence of ferritic alloys gives them strength to prevent cracking in sulfide and chloride environments.

Duplex Steel Buttweld Fittings demonstrate better localized corrosion resistance in comparison to both grade 316L and 317L. Hence these duplex steel fittings are used in applications involving several key industrial fields such as chemical plants, seawater pump, seawater desalination plant, and so on.

Steel pipe fitting are made of carbon or alloy steel pipe, plates, profiles, to a certain shape that could make a function (Change the fluids direction or rate) in pipeline systems. Mostly these fittings includes steel elbow (45 or 90 degree bend), tee, reducer (concentric or eccentric reducer), cross, caps, nipple, flanges, gasket, studs and etc.

2205 is the most widely used duplex (ferritic/austenitic) stainless steel pipe fittings. It is used due to its excellent corrosion resistance and high strength. Duplex S31803 fittings offer a better guarantee of corrosion resistance, but most duplex S31803 currently produced also complies with duplex S31803. 1.4462 belongs to the DUPLEX steel series. This steel has higher corrosion resistance than eg austenitic 1.4404. Therefore, the tensile yield point is about 150% higher.

These fittings commonly used in pressure pipelines and pressure vessel/tanks at lower temperature.

Due to the lower carbon content in 317L fittings, the alloy can be welded without intergranular corrosion. Generally, intergranular corrosion is the result of chromium carbide precipitation on the surface of metals with a higher carbon content and prolonged exposure to high temperatures. Because the alloy used for 317L joints can withstand high temperatures without being corroded by intergranular corrosion, these joints can be used in the as-welded condition.

Monel 400 is a nickel-copper alloy of about 67% Ni and 23% Cu.

Alloy C22 is a nickel-chromium-molybdenum solid solution strengthened super-alloy with a nominal chemical composition of 56% nickel, 22% chromium, and 13% molybdenum, with additions of iron, tungsten, and cobalt.

ASTM A815 Pipe Fittings, ASTM A815 Super Duplex 2507 Pipe Fittings, UNS S32750 Super Duplex Pipe Fittings, ASTM A815 32205 Seamless Pipe Fittings, ASTM A815 S32950 Butt weld Fittings, ASTM A815 Super Duplex S32760 Pipe Fittings Exporter.

HASTELLOY X is a wrought nickel-based alloy with excellent high temperature strength and oxidation resistance. All product forms are excellent in forming and welding. Although HASTELLOY X is primarily known for its heat and oxidation resistance, it also has good resistance to chloride stress corrosion cracking and good carburization, as well as excellent resistance to reducing or carburizing atmospheres. Alloy X is one of the most widely used nickel-based superalloys for gas turbine engine components.

We are a professional manufacturer and exporter of ASTM B366 WP20CB Pipe Fittings N08020 elbow, Alloy 20 Elbow Tee reducer Caps

Duplex Steel S32550 Pipe Fittings has high stress corrosion resistance. These UNS S32550 Pipe Fittings also has lower thermal expansion than austenitic stainless steels. It also has higher thermal conductivity than austenitic stainless steels, and excellent general corrosion resistance in a wide variety of corrosive chemicals including seawater and industrial acids