pipe fittings of best quality

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

ASME B16.11 Threadolet is the most popular branch connection: the branch is made by welding the item to the outlet of the run pipe. The ends of a Threadolet are bevelled to facilitate the welding process, and for this reason. Threadolet belongs to the family of butt weld fittings.

A stainless steel 304 short radius elbow has a radius that is longer than the outside diameter of the pipe it is installed on. These accessories fall under ASTM A403 specification. Their nominal diameters range from 1/8″ to 48″. The standards for these dimensions are ASME B16.9 and B16.28. 304 stainless steel 90 degree elbows are commonly used elbows.

The alloy resists a wide range of corrosive environments and has a good resistance to pitting and crevice corrosion. IN625 has good corrosion resistance in various corrosive environments.

Annealing is a heat treatment process which alters the microstructure of a material to change its mechanical or electrical properties. Typically, in steels, annealing is used to reduce hardness, increase ductility and help eliminate internal stresses.

Bushings are similar to thin tubes most commonly used in machinery with rotating or sliding shafts to increase efficiency and reduce vibration and noise. Bushings can be used for drilling operations in drill stands, hydraulic external gear pumps and motors.

Inconel is a superalloy made with high concentrations of nickel, chromium, and molybdenum.

ASTM A182 Alloy Steel F22 Fittings are available in a variety of shapes, sizes and dimensions according to the needs or requirements of the application or to customer supplied specifications.

They have a minimum tensile strength of 120Ksi and minimum yield strength of 60ksi.

Steel pipe elbow plays a key role in the pipe fittings, which frequently used in different application and available in various shapes and sizes. It connects two pipes with same or different nominal diameters, and to make the pipe turn to a certain direction of 45 degree, 90 degree or 180 degree.

Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and reliability. Suitable for various industrial applications such as vibration, high pressure or corrosive conditions. To improve sealing and reduce wear*, the manufacturer recommends using both Grey Stainless Steel PTFE Thread Sealing Tape and Welded White Seal Plus Multipurpose Fitting Compound.

Cupro Nickel Forged forgings are annealed at temperatures between 593 and 816 degrees Celsius (1100 and 1500 degrees Fahrenheit). Copper-nickel forged threaded crosses are still widely used in modern shipbuilding.

INCOLOY alloy 800 (UNS N08800, W. Nr. 1.4876) is a widely used material for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500¡ãF (816¡ãC).

Steel pipe fittings are made of carbon or alloy steel pipes, sheets, profiles, and have a shape that allows them to function (change the direction or rate of fluid) in a piping system. These accessories mainly include steel elbows (45 or 90 degree bends), tees, reducers (concentric or eccentric reducers), crosses, caps, pipe joints, flanges, gaskets, studs, etc.

A182-F11 belongs to the American standard pearlitic organization heat-resistant steel forgings

Inconel 800 forms a thick yet stable oxide layer. This thick layer is known to protect the outer surface of the Inconel 800 component from further attack.

Half Coupling is used for small bore branching from a vessel or large bore pipe. It can be threaded or socket type. It has a socket or thread end on only one side.

Fittings are used to connect two or more lengths of pipe or to close pipe ends. Fittings can connect pipes in a straight line, change flow direction, increase or decrease flow, or close pipe ends to stop flow.

Most iron-based metals react with water to produce the reddish iron oxide known better as rust. The oxygen atoms in the water pulls iron off of the base metal to form the porous rust structure with no real strength.

A182 F91 Wrought alloy steel tubes, flanges, wrought fittings and valves and other components for high temperature use.

HT PIPE is a leading exporter, manufacturer, and supplier of SS 304 Forged Fittings with an ISO certification. They provide ultimate convenience to their clients by producing high-quality Stainless Steel 304 Forged Fittings offered at reasonable and competitive prices.

Stainless steel 304 is a type of stainless steel that is resistant to corrosion and rusting. Stainless Steel 304 Forged Fittings are used for connecting two pipes or tubes together and can be made from a variety of metals, including copper, brass, aluminum, or stainless steel.

We have a comprehensive inventory of nickel alloy forged fittings, socket weld and threaded fittings in all types, sizes, schedules and pressures. HT PIPE specializes in the manufacture of nickel alloy forged fittings that are in high demand in many applications in the naval, chemical processing, marine, petrochemical and refining, and oil and gas markets.

There are a variety of stainless steels that are suitable for elbows used in different applications. Stainless steel is known to have excellent corrosion resistance, heat resistance and high pressure resistance, so stainless steel elbows are often used in critical applications.

This nickel alloy has good corrosion resistance, good wear resistance and high strength.

Forged pipe fittings refer to pipe fittings formed by forging in pipe fittings manufacturing industry. What is said here refers to the latter forging.

Nickel alloy is a component that contains nickel as a principal element and in higher concentration. It is a solid material that offers wide solubility with iron, chromium, and copper as well. The alloy is present in combined form as well. Nickel alloy is highly versatile and able to sustain heat and corrosion resistance.

A105 is considered a type of forging carbon steel grade.

A?threadolet?is the same basic design as a “weldolet.” However the main difference is the fitting has a female threaded connection to mate to the branch connection. This makes a 90¡ã branch and comes in full size or reducing for a straight piece of pipe.

ASTM A105 is a carbon steel material grade that has the greatest and widespread use. This is used in manufacturing forge piping components.

The Inconel 625 is highly resistant against corrosion and oxidations mediums in various environments.