prime aisi 1020 carbon steel round bar ASTM 350 LF2 bar in fabrication

ASTM A105 Socket weld Fitting is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fittings, Socket Weld Fittings are mainly used for small Pipe Diameters (Small Bore Piping); Generally for Piping whose Nominal Diameter is NPS 2 or smaller.

Carbon steel forged fittings and flanges are prevalent and common used in industries, the representative material grade is ASTM A105 and A350 LF2/LF3.

The flanges also have good strength properties. There are also different types based on the shapes. The carbon steel a105 blind flange is a very special type because it closes a connection and not expand it.

ASTM A420 WPL6 Pipe Fittings are one kind of butt welding pipe fittings,they are commonly produced from the steel pipes of ASTM A333 Grade 6.

The schedules of the fittings range from 5s to XXS.Fittings over NPS12, produced by locally heating a portion of the fitting stock to any temperature for forming, shall be annealed, normalized, or normalized and tempered. And these fittings inlcudes elbow, tee, reducers, the carbon content shall les than 0.26%. NPS12 under no need to be heat treated under this forming process.

The carbon steel ASTM A234 WPB pipe fittings offer a wide of industrial application like chemical equipments, boiler and exchanger manufacturing, mining, refineries, utilities, oil refineries and many others.

A106 steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

ASTM A420 covers elbow, tee, reducer, cap, union and etc, which manufactured according to ASME B16.9, ASME B16.11, MSS SP-79 and MSS SP-95, types in seamless and welded structual pipe fittings.

Carbon steel is defined as any steel with a carbon content not exceeding 2.1% by weight. Carbon steel bolts become harder and increase in strength after heat treatment as the carbon content increases. However, the ductility of the steel decreases.

We are one of the top producers of SA105N Reducing Weld Neck Flange, and our previous clients are always satisfied with our products due to their high-quality and reasonable pricing.

There are studs, washers, threaded rods, screws, etc. Each type of fastener has its own advantages and application requirements. Carbon steel screws can be used without nuts. It can be driven with a screwdriver.

The ASTM A420 Grade WPL6 can be seamless, welded or fabricated. There are different types of the fittings such as the unions, plugs, couplings, bends, caps and elbows.

ASTM A105 is a carbon steel material grade that has the greatest and widespread use. This is used in manufacturing forge piping components.

,ANSI B16.5 A105 Weld Neck Flange,A105N Weld neck flange,A105 weld neck flange,A105 Bind flange,A105 Slip on Flanges

The carbon steel seamless pipe fittings, buttwelded fitting and fabricated ones are available in the market.

The high strength of ASTM A350 LF2 carbon steel square bar presents an opportunity to reduce weight and cost as thinner materials can be used.

A-694 grades, F42 to F70 (for high volume applications). Due to the superior strength of this material, you will find a high-volume material widely used in plumbing services. Alloy steel forgings have higher chromium and molybdenum content than standard carbon steel forgings and are designed for high temperature (over 1000*F), high pressure service. They also have higher corrosion resistance than standard carbon steel forgings due to their higher chromium content.

Carbon steel pipe is the most common use piping material in different industries served for construction, structural, liquid transmissions for water, oil and gas. Typical carbon steel pipe material grades in API 5L Grade B, X42 to X70, ASTM A106 B, ASTM A53 B, ASTM A252 Grade 3 and ASTM A333 Grade 6 etc.Mineral and slurry pipe is for the line pipe that applied in mining industries. A slurry pipeline is designated to transmit ores (Iron, Coal materials), or the industry mining waste, we called the pipeline as taillings. And generally these steel pipes connected in a long distances. Above materials mixed with water, we call slurry. People will use pumps to transport to the final destination then water will be filtered out. Since slurry contained different materials some with abrasive properties, so the pipe could be coated with 3PE, FBE layers to against from corrosion.
Both carbon steel pipe in seamless or welded could be used for the transmission of the slurry. So there is a wide range of material and standards available options to suit for the special working conditions.

U-Bolts are easy to machine and can meet the tight tolerances required for thread and fastener configurations. Carbon steel is also an economical metal. Carbon steels are classified by the amount of carbon in the alloy, which affects the properties of the steel. Mild steel with a carbon content of 0.05-0.3% is ductile and ductile. Low tensile strength and hardenable by carbonization. It is the lowest cost of carbon steel alloys.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

ASTM A105 flanges are forged carbon steel flanges for ambient- and higher-temperature service in pressure systems.

Our astm a694 f60 round bars are accepted by customers in a variety of industries, from basic industries such as sugar, paper, textile, dairy, engineering, to more complex industries such as oil and gas, petrochemical, chemical and fertilizer, power generation, and nuclear industry.

The amount of other elements that may be present in stainless steel is immeasurable compared to carbon steel. The most notable feature of stainless steel is that it is not easy to corrode or rust. Avoiding corrosion is a unique property of steel, as most mild steels are primarily made of iron, which rusts quickly when exposed to conventional oxygen-containing atmospheres.

The specification for Iso Class 4.8 standard covers Grade 4.8 fasteners like Bolts/Screws/Studs. This type of fastener Class 4.8 Bolt could either have Coarse thread and fine pitch thread formation. The standard Class 4.8 Carbon Steel Bolt has been manufactured from Low or medium carbon Alloy Steel.

Flanges are a type of connections for pipe lines to connect the pipes together.Our Carbon Steel A105 Slip On Flanges are meant for non-critical conditions, as they have a low Carbon content.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Hence, materials with low carbon content such as ASTM A105 Fittings are not recommended to be used in those applications which have the need to be constantly exposed to a range temperatures above this value.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.