prime hot rolled alloy steel sheet in coils

Grade 91 alloy steel plates shall be normalized and tempered heat treated or cooled by accelerated cooling by air blasting or liquid quenching, and then tempered. Grade 91 steel requires austenitizing at 1900 to 1975¡ãF [1040 to 1080¡ãC] and should be tempered at 1350 to 1470¡ãF [730 to 800¡ãC].

All chrome molybdenum steel sheets are sedated and heat treated in accordance with ASTM A387, which also specifies minimum and maximum levels of the following elements in steel: Chemicals of Carbon, Manganese, Phosphorus, Sulfur, Silicon, Chromium, Molybdenum, Nickel, Vanadium requirements, columbium, boron, nitrogen, aluminum, titanium and zirconium. A387 boards must undergo product, chemical and tensile testing (documented in the MTC or material test certificate) – must meet specific requirements for tensile strength, yield strength and elongation.

Nickel alloys are alloys with nickel as principal element. Complete solid solubility exists between nickel and copper. Wide solubility ranges between iron, chromium, and nickel make possible many alloy combinations.Steel plates are often used for structural and construcation applications, pressure vessels, marine and off shore equipment, and military applications. The grade, elements and parameters of a steel plate are also improtant in how it is used.

Added molybdenum for excellent temperature and corrosion resistance. The addition of molybdenum and chromium increases tensile strength and at elevated temperatures. These A387 alloy steels GR 11, GR22 and GR91 contain a number of chemistries that help them form into serviceable, harder alloys and higher heat resistant alloys.

A/SA387 GR 22 Grade 2 We offer A/SA387 22 Grade 2 plates to manufacturers in the oil, gas and petrochemical industries. These industries require pressure vessel grade steels that perform well at high temperatures, and our materials serve that purpose well. A/SA387 Grade 22 Class 2 sheet has good corrosion and oxidation resistance and is a good choice.

Hastelloy is a corrosion-resistant nickel alloy that contains other chemical elements such as chromium and molybdenum. This material has high temperature resistance and exceptional corrosion resistance. Hastelloy C276 is one of the grades of Hastelloy used in the oil and gas industry.Hastelloy nickel alloys are fully resistant to a vast array of chemicals, including highly acidic hydrochloric and sulfuric acids. It is also one of the few materials available that can withstand wet chlorine gas, chlorine dioxide and hypochlorite.

We are shareholders in the ASME SA 387 GRADE 9 alloy steel plate series, which has enormous tensile and yield strengths so that it can be used at higher temperatures. The chromium-molybdenum combination gives these plates corrosion resistance and enhanced tensile strength at elevated temperatures.

Nickel alloys provide high resistance to a wide variety of corrosive agents, oxidation and excellent performance at high temperatures.Certain Nickel Alloys are better for high temperature applications, while others do a better job with corrosion resistance.

ASTM A387 Grade 5 Grade 1 Plates, Plates and Coils are generally made of Molybdenum and Chromium. These mechanisms have various mechanical and industrial applications. ASTM A387 Alloy Steel Gr. 5 sheets and ASTM A387 Alloy Steel Gr. 5 Sheets are known for their excellent performance.

By increasing mesh stiffness, A387 also provides high corrosion and oxidation resistance. This necessarily stops the etchant from melting the iron and provides optimum heat resistance, making it a good substitute for gaseous environments. It is very easy to solder. We sell products in different sizes, which may vary in width, height, style and length to meet the various needs and requirements of our customers.

Alloy steel plate is better than carbon steel plate. reason? ASTM A 387 GRADE 12 alloy steel sheet is more responsive to a range of heat treatments and mechanical processes. They are composed of chromium, molybdenum, manganese, silicon, and more, making them stronger, harder, heat-resistant, and weldable.

SA 387 grade alloy steel plate Mainly used for welded pressure vessels where improved toughness is required. It is a low alloy pressure vessel high quality steel for high temperature. We offer a wide range of sheet sizes and can process thicknesses ranging from 6 to 10 mm.

We offer the highest quality alloy steel grade 9 slat coils that are wear resistant and affordable. Widely acclaimed for their exceptional quality, these ranges of alloy steel grade 9 perforated sheets are available in different specifications. ASME SA387 Class 9 Perforated Sheets come in a variety of sizes, but whether you plan to use rivets, nails, clamps, bolts, or screws, choosing the right material for the intended application is an important issue.

ASTM A387 steel plates are typically used in the temperature range of 316 to 593. The high temperature properties of these alloyed steel plates are still of special use, and today, ASTM A387 steel plates are manufactured as fine grained, low silicon, low sulfur, calcium treated and occasionally Q&T to provide the highest level of toughness.

HT PIPE steel plate, officially known as Chrome Molybdenum, is usually sold as ASTM A387 or ASME SA387. A387 is an alloy steel plate designed for use in pressure vessels, process vessels and boilers operating at high temperatures.

ASTM/ASME A387/SA387 Alloy Steel Gr. 5 CL 1/2 is a chrome molybdenum alloy steel plate primarily used in welded boilers and pressure vessels designed for high temperature service. The Cr content was 5.00%, and the Mo content was 0.5%.

Hastelloy C276 is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments.Alloy C-276 is one of the most universally corrosion resistant alloys available today. It is used in a variety of environments ranging from moderately oxidizing to strong reducing conditions. Alloy C-276 has exceptional resistance to sulfuric acid, hydrochloric acid, formic acid, acetic acid, chlorides, solvents, wet chloride gas, hypochlorite and chlorine solutions.

HASTELLOY C-4 alloy (UNS N06455) is the most (microstructurally) stable of the widely
used nickel-chromium-molybdenum materials, which are well known for their resistance
to many aggressive chemicals, in particular hydrochloric acid, sulfuric acid, and chlorides. This alloy resists the formation of grain-boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in the as-welded condition.

In addition, the use of deoxidized steel to produce ASTM A387 Grade 91 sheet also affects its toughness. Since there are no free air molecules in the alloy, the chance of bubble formation is greatly reduced. As a result, without any air bubbles, ASTM A387 Grade 91 alloy steel sheets are non-porous and have no weak points in the material, resulting in a stronger, better product.

HASTELLOY C276 is a Nickel-chromium-molybdenum wrought alloy that is considered the most versatile corrosion resistant alloy available. This alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in an as welded condition. Alloy C-276 also has excellent resistance to pitting, stress-corrosion cracking and oxidizing atmospheres up to 1900¡ãF. Alloy C-276 has exceptional resistance to a wide variety of chemical environments.

Hastealloy is a term that refers to a group of corrosion resistant metal mixtures that are based on nickel. Hastealloys have a unique combination of properties that provide them with significantly stronger corrosion resistance capabilities compared to traditional alloys. As such, it was widely accepted in the chemical process and associated industries, and now has a 50-year-old track record of proven performance in a vast number of corrosive chemicals.

Alloy C276 nickel alloy plate is one of the premier corrosion resistant materials that performs exceptionally well in both oxidizing and reducing environments. Therefore the Haynes Alloy C276 N10276 Polished Plate is used in industries such as pulp and paper production, chemical processing, pollution control, industrial and municipal waste treatment, as well as for the recovery of sour natural gas in sour wells.

One of the advantages of A387 alloy steel plate is its good weldability, our ASTM A 387 GRADE 91 alloy steel plate has excellent ductility, they have excellent formability and can be cut and bent into many shapes. The normalizing and tempering process gives the alloy steel sheet a strong but resilient body due to reheating and cooling. Ultimately, they achieve excellent solderability and are easy to solder to form superstructures.

A387 Chrome Molybdenum Steel Sheet Uses & Applications Due to the key properties of the alloy, chrome molybdenum steel sheet is popular in onshore and offshore production facilities in the oil and gas industry. It is also widely used in the energy industry as a key component in power plants. It can be found in boilers and pressure vessels, heat exchangers, flanges, fittings and valves, pipes and pipe supports.

We maintain friendly relations with all customers who are very satisfied with our alloy steel Gr. 5 spacers. In addition, our alloy steel Gr. Class 5 1 perforated plate and alloy steel Gr. Class 5 1 hot rolled sheet is finely machined to ensure flawless finish.

Too many good properties found in the same product just because of better sheet production. These are high tensile strength, good dimensional accuracy, surface finish, flexibility and durability, withstand heavy loads, strong construction and corrosion resistance. Resistance to corrosion, stress corrosion cracking, crevice corrosion cracking, oxidation/pitting corrosion makes it suitable for a variety of applications.

A387 steel plate is much heavier than aluminum, but its corrosion resistance is much lower than stainless steel. What makes it so popular is that chrome molybdenum steel is strong and formable. Therefore, it can be easily made into pipes and fittings and rolled into pressure vessels and boilers without the cost or cracking seen with other materials.

A/SA387 GR 5CLASS 2 A high-quality chrome-molybdenum alloy steel plate specially designed for use in weldable carbon steel pressure vessels at high temperatures. The added molybdenum gives the material higher temperature tensile strength, while the chromium provides better corrosion resistance.

Hastelloy C-4 is a nickel-chromium-molybdenum alloy with outstanding high temperature stability. It has high ductility and corrosion resistance. It’s high temperature resistance up to 1900 ¡ãF (1038 ¡ãC) makes it suitable for most chemical process application in the “as” welded condition.
Like other nickel alloys, it is ductile, easy to form and weld, and possesses exceptional resistance to stress corrosion cracking in chloride-bearing solutions (a form of degradation to
which the austenitic stainless steels are prone). With its high chromium and molybdenum
contents, it is able to withstand both oxidizing and non-oxidizing acids, and is resistant to
pitting and crevice attack in the presence of chlorides and other halides.

A/SA387 Grade 91 is also an option for use in sour environments due to the material’s excellent corrosion resistance. The material has good weldability and heat resistance, making it a versatile steel that can be used in a variety of applications.