reducer ecc smls ANSI B16.9 BW ASTM A234

The greater content of alloying elements like chromium, molybdenum, and nitrogen in SD UNS S32750 tee helps material in withholding crevice corrosion and pitting. SD UNS S32750 cross is combining greater mechanical strength and with good ductility with resistance to corrosion in a different atmosphere.

ASTM A234 WPB Elbow is a standard specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel suitable for for Moderate and High Temperature Service.

Stainless grade S31254 is a very high-end austenitic stainless steel.
Grade S31254 is reported to be a cost-effective alternative to high nickel and titanium alloys for some applications.

This means titanium can be used as a replacement for steel¡ªa major benefit, as it is 45% lighter than steel. It is twice as strong as aluminum and 60% denser.

Super Duplex S32950 Fittings are hardened on a variety of parameters such as strength, temperature, pressure resistance and durability before supplied to the customers. These UNS S32950 Super Duplex Pipe Fittings are being offered in an inclusive range such as S32950 Elbow, S32950 Bends, S32950 Equal & Unequal (reducing) Tees, S32950 Equal & Unequal (reducing) Cross, S32950 Concentric & Eccentric Reducer, S32950 End Pipe Cap, S32950 Long & Short Stub-ends, etc.

INCONEL (nickel-chromium-iron) alloy 600 is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability.

Monel K500 pipe bend and elbow have corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidising mineral acids, salts and alkalis.

A403 WP304 Pipe Bends can be welded easily however, the material may face localized corrosion due to intergranular corrosion risk.

The arrangement of elements in the periodic chart shows how the elements are related to one another chemically. As it is in the middle of the table, we know titanium exhibits properties between those of metals and non-metals.

Inconel 600 butt welded pipe fittings have excellent mechanical and physical properties. They have high strength and enhanced solderability over a wide temperature range. They show good resistance in different types of corrosive media and the fittings are non-magnetic in nature.

Type 317L is a molybdenum-containing austenitic stainless steel designed to provide better corrosion resistance than Type 316L in highly corrosive process environments, especially those containing chlorides or other halides. The low carbon content allows 317L to be welded without intergranular corrosion due to chromium carbide precipitation at grain boundaries. Type 317L is non-magnetic in the annealed state, but can be made slightly magnetic by soldering.

ASTM A403 WP317L is a molybdenum bearing, low carbon content “L” grade austenitic stainless steel that provides improved corrosion resistance over 304L and 316L stainless steels. ASTM A403 WP317 Pipe Fittings could be a altered adaptation of Stainless Steel 317L Pipe Fittings.

The stability of niobium allows pipe fittings to be used in corrosive environments in the as-welded state. It also hardens best with the help of using working temperature. It also offers significant corrosion resistance with extremely clean fabrication and increased mechanical housing. Stainless steel UNS S31600 fittings meet or exceed unique corporate requirements, including ISO, DIN, ASTM and ASME requirements.

It is resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at normal and elevated temperatures.

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

ASTM A234 WP9 Alloy Steel Pipe Fittings are known to deliver exceptional performance and are generally developed for meeting the demands.Extraordinary safeguards for these Alloy Steel WP9 Dish Cap Butt Weld Pipe Fittings ought to be taken to stay away from intemperate heat input.

AISI 316 and 316L stainless steels offer increased resistance to atmospheric corrosion, many organic and inorganic chemicals, and food and beverages. 316L has a maximum carbon content of 0.03 and is suitable for welding, while 316 has a moderate carbon content.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

Hastelloy C-276 alloy excellent resistance to a wide variety of chemical process environments, including strong oxidizers such as ferric and cupric chlorides, and hot contaminated media (organic and inorganic).

316 stainless steel pipe bend can be used with seawater, provided precautions are taken to avoid crevice corrosion developing under sediments, precipitation and biofouling, and at designed-in crevices.

UNS S31803 pipe fittings is a duplex grade with a ferritic-austenitic microstructure. The alloy consists of around 40-50% ferrite in the annealed condition. The duplex microstructure has the high strength of the ferritic grades whilst retaining the corrosion resistance of the austenitic grades.

Monel 400 is resistant to both steam and seawater as well as highly caustic solutions such as sulfuric, hydrochloric, and hydrofluoric acids when they are deaerated.

In the annealed condition, stainless steel 317L fittings are non-magnetic. Although fittings manufactured from Grade 317L cannot be hardened by heat treatment, the material will harden by cold working. 317L fittings can be easily welded and machined by traditional shop fabrication methods. No post weld heat treatment is required for these fittings. Generally, grade 317 stainless steel can be welded using fusion welding and resistance welding methods, but for these 317L stainless steel fittings, oxyacetylene welding is not the preferred method. For best results, use 317L filler metal or AWS E/ER317 or .

Molybdenum-containing austenitic stainless steel DIN 1.4404 seamless pipe fittings are relatively low in carbon compared to DIN 1.4401 grades, but with small additions of molybdenum and nitrogen, and are used in light or moderately corrosive industries.

ASTM A420 WPL6 Pipe Fittings are one kind of butt welding pipe fittings,they are commonly produced from the steel pipes of ASTM A333 Grade 6.

Some types of duplex steel pipe fittings are butt welded fittings, elbows, reducers, couplings, reducers, tees, adapters, joints, and more. Other features of this fitting are good corrosion resistance, pitting and crevice resistance, higher tensile strength, higher yield strength, good toughness, reliability, durability, oxidation resistance, mechanical properties, chemical properties Wait. In addition, it is used in the following applications in chemical industry, pulp and paper industry, condenser, offshore industry, etc.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Our ASTM A815 Duplex Steel UNS S32205 Caps are available in a variety of cap shapes, diameters and thread types and are resistant to many industrial acids and seawater.